DOWNLOAD Sharp XG-C430X (serv.man3) Service Manual ↓ Size: 1.96 MB | Pages: 45 in PDF or view online for FREE

It is possible to disconnect all the TCP/IP connec-
tions currently recognized by the projector. Even if
the COM Redirect port is fixed in the Busy status
due to a problem, it is possible to force the Ready
status back by carrying out this disconnection.

1

1

1

1

1 Enter “d” and press the “Enter” key.
2

2

2

2

2 Enter “y” and press the “Enter” key.

Note

• If Disconnect All is performed, the connection to

the projector via network will be forcibly discon-
nected.

Enters ADVANCED SETUP MENU.

1

1

1

1

1 Enter “a” and press the “Enter” key.

If there is no input after a fixed time, the projector
automatically disconnects network connection using
the Auto Logout function. It is possible to set the time
until the projector is automatically disconnected in
units of a minute (from 1 to 65535 minutes).

1

1

1

1

1 Enter “1” and press the “Enter” key.
2

2

2

2

2 Enter numerical value and press the “Enter” key.

Display set numerical value (*).

Note

• If the set value is made 0, the Auto Logout func-

tion is disabled.

• If an invalid number is entered, an error message

(“Parameter Error!”) will be displayed and the
screen returns to the ADVANCED SETUP MENU.

Setting of TCP port number. It is possible to set in
the range of 1025 to 65535.

1

1

1

1

1 Enter “2” and press the “Enter” key.
2

2

2

2

2 Enter numerical value and press the “Enter” key.

Display set numerical value (*).

Note

• Set according to need. Normally, use with the fac-

tory default setting.

setup>d
Disconnect All Connections(y/n)?y
Now Disconnecting...

1
2

setup>a
******************** ADVANCED SETUP MENU ***********************
[1]Auto Logout Time

[2]Data Port

[5]Network Ping Test
[6]Accept IP Addr(1)

[7]Accept IP Addr(2)

[8]Accept IP Addr(3)

[9]Accept All IP Addr

[0]Search Port

[!]Restore Default Setting
[Q]Return to Main Menu

advanced>

1

advanced>1
Valid range

: 0 to 65535 (minute)

note: if you enter “0”, auto logout function will be disable.
Auto Logout Time : 5
Please Enter

:15

(change)        —>  15

1

2

*

advanced>2
Valid range

:1025 to 65535

Data Port

:10002

Please Enter

:10005

(change)          —>  10005

1

2

*

It is possible to confirm that a network connection
between the projector and a computer etc. is work-
ing normally.

1

1

1

1

1 Enter “5” and press the “Enter” key.
2

2

2

2

2 Enter IP address of device to be tested and

press the “Enter” key.
Display entered IP address (*1).
Display test result (*2).

Note

• If the “Enter” key is pressed without entering an

IP address, the Ping destination IP address used
previously is entered.

• If there is a fault with the connection, “Error: No

answer” is displayed after a 5 second retry. In this
case, please confirm the settings for the projector
and the computer, and contact your network ad-
ministrator.

It is possible to improve security of the projector by
allowing connection from only a prescribed IP ad-
dress. It is possible to set up to three IP addresses
allowing connection to the projector.

1

1

1

1

1 Enter “6”, “7” or “8” and press the “Enter” key.
2

2

2

2

2 Enter numerical value and press the “Enter” key.

Display set numerical value (*).

Note

• To  invalidate the Accept IP Address being cur-

rently set, enter “0.0.0.0”.

• If there is one or more Accept IP Addr being set,

no connections are allowed from IP addresses
that are not yet set. They can be cancelled using
[9]Accept All IP Addr.

Removes IP addresses set with “Accept IP Addr”.

1

1

1

1

1 Enter “9” and press the “Enter” key.
2

2

2

2

2 Enter “y” and press the “Enter” key.

Note

• At the point in time where “y” was entered, the

numerical values for Accept IP Addr(1)-(3) are
reset to “0.0.0.0”.

• If “n” is entered, setting is not altered.

advanced>5
Ping dest IP addr :192.168.150.1
Please Enter

:192.168.150.152

(change)         —>  192.168.150.152
32 bytes from 192.168.150.152: icmp_seq = 1, time = 0 ms
32 bytes from 192.168.150.152: icmp_seq = 2, time = 0 ms
32 bytes from 192.168.150.152: icmp_seq = 3, time = 0 ms
32 bytes from 192.168.150.152: icmp_seq = 4, time = 0 ms

1

2

*1

*2

advanced>6
Accept IP Addr(1) : 0.0.0.0
Please Enter

: 192.168.150.152

(change)         —>   192.168.150.152

1

2

*

advanced>9
Accept All IP Addresses(y/n)? y

1
2

Sets the port number used when searching for the
projector from the network.

1

1

1

1

1 Enter “0” and press the “Enter” key.
2

2

2

2

2 Enter numerical value and press the “Enter” key.

Display set numerical value (*).

Note

• Set according to need. Normally, use with the fac-

tory default setting.

Returns all menu setting values to the default state.

1

1

1

1

1 Enter “!” and press the “Enter” key.
2

2

2

2

2 Enter “y” and press the “Enter” key.

Note

• If the values for IP Address, Subnet Mask or Gate-

way of the projector have been returned to the
default settings via Telnet, the computer cannot
be connected to the projector depending on the
computer’s network settings.

Returns to the main SETUP MENU.

1

1

1

1

1 Enter “q” and press the “Enter” key.

Returns to the SETUP MENU.

advanced>0
Please Enter Port Number for Search from Computer.
Valid range

: 1025 to 65535

Search Port

: 5006

Please Enter

: 5004

(change)         —>   5004

1

2

*

advanced>!
Restore All Setting to Default(y/n)? y
— User Setting Initialized —

1
2

advanced>q
---------------------------------SETUP MENU--------------------------------
[1]IP Address

[2]Subnet Mask

[3]Default Gateway

[4]User Name

[5]Password

[6]RS-232C Baud Rate [7]Projector Name [8]DHCP Client
[A]Advanced Setup

[D]Disconnect All

[V]View All Setting

[S]Save & Quit

[Q]Quit Unchanged

setup>

1

• If you do not have HyperTerminal in-

stalled, see the operation manual of your
computer.

• Depending on the settings of your com-

puter, you may be required to enter your
area code and other details. Enter the
information as required.

Select
“TCP/IP (Winsock)”