DOWNLOAD Sharp XG-C40XE (serv.man18) Service Manual ↓ Size: 2.5 MB | Pages: 20 in PDF or view online for FREE

2, 3

1, 4

You can adjust the projector’s picture to your prefer-
ences with the following picture settings.

For less contrast
For less brightness
For less colour intensity
Skin tones become purplish
For less sharpness
For weaker red
For weaker blue

For more contrast
For more brightness
For more colour intensity
Skin tones become greenish
For more sharpness
For stronger red
For stronger blue

ß 

© 

All image adjustment items are returned to the factory preset
settings.

1

2

• “Color”, “Tint” and “Sharp” adjustments are not available in

COMPUTER/RGB mode (Input 1 or 2).

• “Sharp” adjustment is not available in COMPONENT mode

(Input 1 or 2).

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press  MENU. Menu bar and “Picture” menu

screen appear. GUI operation guide is also
displayed.

2 Press ∂/ƒ  to select a specific adjustment item.

3 Press ß/© to move the   mark of the selected

adjustment item to the desired setting.

4 To exit from the GUI, press MENU.

• To reset all adjustment items, select “Reset” on the “Picture”

menu screen and press ENTER.

• The adjustments can be stored separately in the “INPUT

1”, “INPUT 2”, “INPUT 3 (VIDEO)” and “INPUT 4 (S-VIDEO)”
modes.

XG-C40XE/CD (E)-d

01.8.1, 5:53 PM

28

2, 3

1, 4

This function can be used to adjust the colour
temperature to suit the type of image input to the
projector (video, computer image, TV broadcast, etc.).
Decrease the colour temperature to create warmer,
reddish images for natural flesh tones. Increase the
colour temperature to create cooler, bluish images for
a brighter picture.

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press  MENU. Menu bar and “Picture” menu

screen appear. GUI operation guide is also
displayed.

2 Press ∂/ƒ to select “CLR Temp”.

3 Press ß/© to move the   mark of the selected

adjustment item to the desired setting.

4 To exit from the GUI, press MENU.

Increases colour temperature for
cooler, bluish, florescent-like
images.
(High colour temperature)

Decreases colour temperature
for warmer, reddish,
incandescent-like images.
(Low colour temperature)

5

2, 3, 4

1, 6

This function allows you to select the input signal type
(COMPUTER/RGB or COMPONENT) for INPUT 1 or 2
port.

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press MENU.

2 Press ß/© to select “Picture”.

3 Press  ∂/ƒ to select “Signal Type”, and then

press ©.

4 Press  ∂/ƒ to select “Computer/RGB” or

“Component”.

5 Press ENTER to save the setting.

6 To exit from the GUI, press MENU.

ⳮ3

Ⳮ3

(Red) ß button

©

XG-C40XE/CD (E)-d

01.8.1, 5:53 PM

29

This function allows you to select either an interlaced
display or a progressive display of a video signal. The
progressive display projects a smoother video image.

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press MENU.
2 Press ß/© to select “Picture”.
3 Press ∂/ƒ to select “I/P Conversion”, and then

press ©.

4 Press ∂/ƒ to select “Interlaced” or “Progressive”.
5 Press ENTER to save the setting.

6 To exit from the GUI, press MENU.

Interlaced mode creates a single image through the activation
of scanning lines in two fields. Use this mode when projecting
moving images.

Progressive mode creates a single image using all available
scanning lines. Use this mode when projecting still images to
avoid flicker and stripes that result from interlaced source still
images.

5

2, 3, 4

1, 6

This projector’s audio is factory preset to standard
settings. However, you can adjust it to suit your own
preferences by adjusting the following audio settings.

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press  MENU. Menu bar and “Picture” menu

screen appear. GUI operation guide is also
displayed.

2 Press ß/© to select “Audio”.

3 Press ∂/ƒ to select a specific adjustment item.
4 Press ß/© to move the  mark of the selected

adjustment item to the desired setting.

5 To exit from the GUI, press MENU.

• To reset all adjustment items, select “Reset” on the “Audio”

menu screen and press ENTER.

2, 3, 4

1, 5

2

3

For weaker treble
For weaker bass

For stronger treble
For stronger bass

All audio adjustment items are returned to the factory preset
settings.

© button

ß button

XG-C40XE/CD (E)-d

01.8.1, 5:53 PM

30

When displaying computer patterns which are very
detailed (tiling, vertical stripes, etc.), interference may
occur between the LCD pixels, causing flickering,
vertical stripes, or contrast irregularities in portions of
the screen. Should this occur, adjust “

Clock

”, “

Phase

”,

“H-Pos” and “V-Pos” for the optimum computer image.

• Computer image adjustments can be made easily by

pressing AUTO SYNC (

). See page 34 for details.

2, 3, 4

1, 5

Adjusts vertical noise.
Adjusts horizontal noise (similar to tracking on your VCR).
Centres the on-screen image by moving it to the left or right.
Centres the on-screen image by moving it up or down.

(

Select the desired computer input mode with INPUT.)

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press  MENU. Menu bar and “Picture” menu

screen appear. GUI operation guide is also
displayed.

2 Press ß/©  to select “Fine Sync”.

3 Press  ∂/ƒ  to select a specific adjustment item.

4 Press ß/© to move the   mark of the selected

adjustment item to the desired setting.

5 To exit from the GUI, press MENU.

• To reset all adjustment items, select “Reset” on the “Fine

Sync” menu screen and press ENTER.

2

3

XG-C40XE/CD (E)-d

01.8.1, 5:54 PM

31