Sharp XG-C40XE (serv.man17) User Manual / Operation Manual ▷ View online
Important
Information
6
Usage Guidelines
Cautions Concerning the Laser Pointer
The laser pointer on the remote control emits a laser beam from the laser
pointer window. This is a Class II laser which may impair your sight if directed
into the eyes. The three marks shown on the left are caution labels for the
laser beam.
• Do not look into the laser pointer window or shine the laser beam on yourself
pointer window. This is a Class II laser which may impair your sight if directed
into the eyes. The three marks shown on the left are caution labels for the
laser beam.
• Do not look into the laser pointer window or shine the laser beam on yourself
or others. (The laser beam used in this product is harmless when directed
onto the skin. However, be careful not to project the beam directly into the
eyes.)
onto the skin. However, be careful not to project the beam directly into the
eyes.)
• Always use the laser pointer at temperatures between
Ⳮ5°C and Ⳮ40°C.
• Use of controls or adjustments, or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
Laser pointer
window
window
Caution Concerning the Lamp Unit
Potential hazard of glass particles if lamp ruptures. Please have Sharp
Authorised LCD Projector Dealer or Service Centre replace lamp if rupture
occurs.
See “Replacing the Projection Lamp” on pages 50 and 51.
Authorised LCD Projector Dealer or Service Centre replace lamp if rupture
occurs.
See “Replacing the Projection Lamp” on pages 50 and 51.
CAUTION
POTENTIAL HAZARD OF GLASS
PARTICLES. SEE OPERATION MANUAL.
PARTICLES. SEE OPERATION MANUAL.
LAMP MAY RUPTURE.
ATTENTION
LAMPE. DANGER POTENTIEL DE PARTICULES DE
VERRE. SE REPORTER AU MODE D’EMPLOI.
VERRE. SE REPORTER AU MODE D’EMPLOI.
RUPTURE POSSIBLE DE LA
HOT SURFACE.
REPLACE WITH
SAME SHARP LAMP UNIT TYPE BQC-XGC40XU/1
ONLY. UV RADIATION: CAN CAUSE EYE DAMAGE.
TURN OFF LAMP BEFORE SERVICING. MEDIUM PRESSURE
LAMP: RISK OF EXPLOSION.
HANDLE WITH CARE. SEE OPERATION MANUAL.
REPLACE WITH
SAME SHARP LAMP UNIT TYPE BQC-XGC40XU/1
ONLY. UV RADIATION: CAN CAUSE EYE DAMAGE.
TURN OFF LAMP BEFORE SERVICING. MEDIUM PRESSURE
LAMP: RISK OF EXPLOSION.
HANDLE WITH CARE. SEE OPERATION MANUAL.
NE REMPLACER QUE PAR UNE UNITE DE LAMPE SHARP DE TYPE
BQC-XGC40XU/1.
RAYONS ULTRAVIOLETS:PEUVENT ENDOMMAGER LES YEUX.
ETEINDRE LA LAMPE AVANT DE PROCEDER A L’ENTRETIEN.
LAMPE A MOYENNE PRESSION: RISQUE D’EXPLOSION.
A MANIPULER AVEC PRECAUTION. SE REPORTER AU MODE
D’EMPLOI.
BQC-XGC40XU/1.
RAYONS ULTRAVIOLETS:PEUVENT ENDOMMAGER LES YEUX.
ETEINDRE LA LAMPE AVANT DE PROCEDER A L’ENTRETIEN.
LAMPE A MOYENNE PRESSION: RISQUE D’EXPLOSION.
A MANIPULER AVEC PRECAUTION. SE REPORTER AU MODE
D’EMPLOI.
CAUTION
ATTENTION
SURFACE CHAUDE.
Cautions Concerning the Setup of the Projector
For minimal servicing and to maintain high image quality, SHARP recommends
that this projector be installed in an area free from humidity, dust and cigarette
smoke. If the projector is used in these environments, the lens and filter will
need to be cleaned (or the filter replaced) more often, and internal cleaning
may become necessary. As long as the projector is regularly cleaned, use in
these environments will not reduce the overall operation life of the unit. Internal
cleaning should only be performed by a Sharp Authorised LCD Projector
Dealer or Service Centre.
that this projector be installed in an area free from humidity, dust and cigarette
smoke. If the projector is used in these environments, the lens and filter will
need to be cleaned (or the filter replaced) more often, and internal cleaning
may become necessary. As long as the projector is regularly cleaned, use in
these environments will not reduce the overall operation life of the unit. Internal
cleaning should only be performed by a Sharp Authorised LCD Projector
Dealer or Service Centre.
• The exhaust vent, the lamp cage cover and adjacent areas may be
extremely hot during projector operation. To prevent injury, do not touch
these areas until they have sufficiently cooled.
these areas until they have sufficiently cooled.
• Allow at least 10 cm of space between the cooling fan (exhaust vent) and
the nearest wall or obstruction.
• If the cooling fan becomes obstructed, a protection device will automatically
turn off the projector lamp. This does not indicate a malfunction. Remove
the projector power cord from the wall outlet and wait at least 10 minutes.
Then turn on the power by plugging the power cord back in. This will return
the projector to the normal operating condition.
the projector power cord from the wall outlet and wait at least 10 minutes.
Then turn on the power by plugging the power cord back in. This will return
the projector to the normal operating condition.
Notes on Operation
Ⳮ40˚C
Ⳮ5˚C
XG-C40XE/CD (E)-a
01.8.1, 5:49 PM
6
Important
Information
7
Temperature Monitor Function
If the projector starts to overheat due to setup problems or a dirty air filter,
“TEMP.” and “ ” will flash in the lower-left corner of the picture. If the
temperature continues to rise, the lamp will turn off, the TEMPERATURE
WARNING indicator on the projector will flash, and after a 90-second cooling-
off period the power will shut off. Refer to “Lamp/Maintenance Indicators” on
page 49, for details.
“TEMP.” and “ ” will flash in the lower-left corner of the picture. If the
temperature continues to rise, the lamp will turn off, the TEMPERATURE
WARNING indicator on the projector will flash, and after a 90-second cooling-
off period the power will shut off. Refer to “Lamp/Maintenance Indicators” on
page 49, for details.
• The cooling fan regulates the internal temperature, and its performance is
automatically controlled. The sound of the fan may change during projector operation
due to changes in the fan speed.
due to changes in the fan speed.
Lamp Monitor Function
When the projector is turned on after the lamp has been used for 1,900 hours,
“LAMP” and “ ” will flash in the lower-left corner of the picture to advise you
to replace the lamp. See pages 50 and 51 for lamp replacement. If the lamp
has been used for 2,000 hours, the projector power will automatically turn off
and the projector will enter standby mode. Refer to “Lamp/Maintenance
Indicators” on page 49, for details.
“LAMP” and “ ” will flash in the lower-left corner of the picture to advise you
to replace the lamp. See pages 50 and 51 for lamp replacement. If the lamp
has been used for 2,000 hours, the projector power will automatically turn off
and the projector will enter standby mode. Refer to “Lamp/Maintenance
Indicators” on page 49, for details.
Usage Guidelines
IMPORTANT
• Microsoft and Windows are registered trademarks in the United States and other countries of Microsoft Corporation.
• PS/2 and PC/AT are registered trademarks in the United States of International Business Machines Corporation.
• Acrobat and Acrobat Reader are registered trademarks or trademarks of Adobe Systems Incorporated.
• Macintosh is a registered trademark in the United States and other countries of Apple Computer, Inc.
• The other company and product names mentioned are trademarks or registered trademarks of each respective company.
• This software is based in part on the work of the Independent JPEG Group.
• PS/2 and PC/AT are registered trademarks in the United States of International Business Machines Corporation.
• Acrobat and Acrobat Reader are registered trademarks or trademarks of Adobe Systems Incorporated.
• Macintosh is a registered trademark in the United States and other countries of Apple Computer, Inc.
• The other company and product names mentioned are trademarks or registered trademarks of each respective company.
• This software is based in part on the work of the Independent JPEG Group.
XG-C40XE/CD (E)-a
01.8.1, 5:49 PM
7
Important
Information
8
How to Access the
PDF
Operation Manuals (for Windows and Macintosh)
PDF operation manuals in several languages are included in the CD-ROM. To utilize these manuals, you need to
install Adobe Acrobat Reader on your PC (Windows or Macintosh). If you have not installed Acrobat Reader yet,
you can download it from the Internet (http://www.adobe.com) or install it from the CD-ROM.
install Adobe Acrobat Reader on your PC (Windows or Macintosh). If you have not installed Acrobat Reader yet,
you can download it from the Internet (http://www.adobe.com) or install it from the CD-ROM.
To Install Acrobat Reader from the CD-ROM
For Windows:
1 Insert the CD-ROM in the CD-ROM drive.
2 Double click on the “My Computer” icon.
3 Double click on the “CD-ROM” drive.
4 Double click on the “manuals” folder.
5 Double click on the “acrobat” folder.
6 Double click on the “windows” folder.
7 Double click on the desired installation
programme and follow the instructions on the
screen.
screen.
For Macintosh:
1 Insert the CD-ROM in the CD-ROM drive.
2 Double click on the “CD-ROM” icon.
3 Double click on the “manuals” folder.
4 Double click on the “acrobat” folder.
5 Double click on the “mac” folder.
6 Double click on the desired installation
programme and follow the instructions on the
screen.
screen.
For other operating systems:
Please download Acrobat Reader from the Internet (http://www.adobe.com).
For other languages:
If you prefer using Acrobat Reader for languages other than those included in the CD-ROM, please download the appropriate
version from the Internet.
version from the Internet.
Accessing the PDF Manuals
For Windows:
1 Insert the CD-ROM in the CD-ROM drive.
2 Double click on the “My Computer” icon.
3 Double click on the “CD-ROM” drive.
4 Double click on the “manuals” folder.
5 Double click on the “xg-c40xe” folder.
6 Double click on the language (name of the folder)
that you want to view.
7 Double click on the “c40” pdf file to access the
projector manuals.
Double click on the “saps” pdf file to access the
Sharp Advanced Presentation Software manual.
Double click on the “saps” pdf file to access the
Sharp Advanced Presentation Software manual.
8 Double click on the pdf file.
For Macintosh:
1 Insert the CD-ROM in the CD-ROM drive.
2 Double click on the “CD-ROM” icon.
3 Double click on the “manuals” folder.
4 Double click on the “xg-c40xe” folder.
5 Double click on the language (name of the folder)
that you want to view.
6 Double click on the “c40” pdf file to access the
projector manuals.
Double click on the “saps” pdf file to access the
Sharp Advanced Presentation Software manual.
Double click on the “saps” pdf file to access the
Sharp Advanced Presentation Software manual.
7 Double click on the pdf file.
• If the desired pdf file cannot be opened by double clicking the mouse, start Acrobat Reader first, then specify the desired file
using the “File”, “Open” menu.
• See the “readme.txt” file on the CD-ROM for important information on the CD-ROM not included in this operation manual.
XG-C40XE/CD (E)-a
01.8.1, 5:49 PM
8
Important
Information
9
Projector
Part Names
Foot release
VOLUME buttons (
Ⳮ/ⳮ)
MENU button
ENTER button
UNDO button
GAMMA button
RESIZE button
AUTO SYNC button
MUTE button
KEYSTONE button
BLACK SCREEN button
ENLARGE button
FREEZE button
INPUT button
POWER buttons (ON/OFF)
POWER indicator
ADJUSTMENT buttons
(∂ /ƒ/ß / ©)
TEMPERATURE WARNING
indicator
indicator
LAMP REPLACEMENT
indicator
indicator
Numbers next to the part names refer to the main pages in this manual where the topic is explained.
Carrying handle
Zoom knob
Remote control sensor
Kensington Security Standard
connector
connector
Front and Top View
Side and Rear View
INPUT 1 port (HD 15)
15
13
14
14
13
23
47
6
13
13
14
16
Cooling fan (Exhaust vent)
RS-232C port (9-pin Mini DIN)
AUDIO INPUT terminals
for INPUT 3, 4 (RCA)
OUTPUT port for INPUT 1, 2 (HD 15)
Speaker
AC socket
INPUT 2 port (HD 15)
AUDIO OUTPUT terminal
(3.5 mm stereo minijack)
(3.5 mm stereo minijack)
AUDIO INPUT terminal
for INPUT 1, 2
(3.5 mm stereo minijack)
for INPUT 1, 2
(3.5 mm stereo minijack)
S-VIDEO INPUT 4 terminal
(4-pin Mini DIN)
(4-pin Mini DIN)
VIDEO INPUT 3 terminal
(RCA)
(RCA)
49
19
49
18
19
18
25
22
34
19
38
35
37
36
22
39
25
53
52
21
25
19
23
19
Focus knob
Remote control sensor
Air filter/Cooling fan (Intake vent)
XG-C40XE/CD (E)-a
01.8.1, 5:49 PM
9
Click on the first or last page to see other XG-C40XE (serv.man17) service manuals if exist.