DOWNLOAD Sharp XG-C40XE (serv.man17) Service Manual ↓ Size: 2.71 MB | Pages: 20 in PDF or view online for FREE

For your assistance in reporting the loss or theft of your
Colour LCD Projector, please record the Serial Number
located on the bottom of the projector and retain this
information. Before recycling the packaging, please be
sure that you have checked the contents of the carton
thoroughly against the list of “Supplied Accessories”
on page 12.

 

Intense light source. Do not look into the beam or view it directly. Be especially careful
that children do not look directly into the beam.

WARNING:
To reduce the risk of fire or electric shock, do not expose this appliance to liquids.

CAUTION:
To reduce the risk of electric shock, do not remove cabinet. No user-serviceable parts
are inside. Refer servicing to qualified service personnel.

WARNING:
This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.

XG-C40XE/CD (E)-a

01.8.1, 5:49 PM

1

See “Replacing the Projection Lamp” on pages 50 and 51.

The cooling fan in this projector continues to run for about 90 seconds after the projector is turned off. During
normal operation, when turning the power off always use the POWER buttons. Ensure the cooling fan has
stopped before disconnecting the power cord.
DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR OFF BY DISCONNECTING THE POWER
CORD. FAILURE TO OBSERVE THIS WILL RESULT IN PREMATURE LAMP FAILURE.

BEFORE REMOVING THE SCREW,
DISCONNECT POWER CORD.
HOT SURFACE INSIDE. ALLOW
1 HOUR TO COOL BEFORE
REPLACING THE LAMP.
SEE OPERATION MANUAL.

DEBRANCHER LE CORDON
D’ALIMENTATION AVANT DE
RETIRER LES VIS. L’INTERIEUR DU
BOITIER ETANT EXTREMEMENT
CHAUD, ATTENDRE 1 HEURE AVANT
DE PROCEDER A U REMPLACEMENT
DE LA  LAMPE.  SE REPORTER AU
MANUEL D’UTILISATION.

XG-C40XE/CD (E)-a

01.8.1, 5:49 PM

2

For your own protection and prolonged operation of your LCD Projector, be sure to read the following “Important
Safeguards” carefully, before use.
This projector has been engineered and manufactured to ensure your personal safety. But IMPROPER USE CAN
RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS. In order not to defeat the safeguards
incorporated into this LCD Projector, observe the following basic rules for its installation, use and servicing.

17. Unplug the LCD Projector equipment from the wall outlet

and refer servicing to qualified service personnel under
the following conditions:

a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the LCD Projector.
c. If the LCD Projector has been exposed to rain or

water.

d. If the LCD Projector does not operate normally

when you follow the operating instructions. Adjust
only those controls that are covered by the oper-
ating instructions, as improper adjustment of other
controls may cause damage and will often require
extensive work by a qualified technician to restore
the LCD Projector to normal operation.

e. If the LCD Projector has been dropped or the

cabinet has been damaged.

f.

When the LCD Projector exhibits a distinct change
in performance—this indicates a need for service.

18. When replacement parts are required, be sure the ser-

vice technician has used replacement parts specified by
the manufacturer that have the same characteristics as
the original parts. Unauthorised substitutions may result
in fire, electric shock, or other hazards.

19. This LCD Projector is provided with one of the following

types of plugs. If the plug should fail to fit into the power
outlet, please contact your electrician.
Do not defeat the safety purpose of the plug.

a. Two-wire type mains plug.

b. Three-wire grounding type mains plug with a

grounding terminal.
This plug will only fit into a grounding type power
outlet.

1. Unplug the LCD Projector from the wall outlet before

cleaning.

2. Do not use liquid cleaners or aerosol cleaners. Use a

damp cloth for cleaning.

3. Do not use attachments not recommended by the LCD

Projector manufacturer, as they may cause hazards.

4. Do not use the LCD Projector near water; for example,

near a bathtub, washbowl, kitchen sink, laundry tub, in a
wet basement, near a swimming pool, etc. Never spill
liquid into the projector.

5. Do not place the LCD Projector on an unstable cart, stand,

or table. The LCD Projector may fall, which may cause
serious injury to a child or an adult, and/or serious damage
to the unit.

6. Wall or Ceiling Mounting—The product should be

mounted to a wall or ceiling only as recommended by
the manufacturer.

7. LCD Projector equipment and cart

combinations should be moved
with care. Quick stops, excessive
force, and uneven surfaces may
cause the equipment and cart
combination to overturn.

8. Slots and openings in the cabinet back and bottom are

provided for ventilation. To ensure reliable operation of
the LCD Projector and to protect it from overheating, these
openings must not be blocked or covered. The openings
should never be covered with cloth or other material.

9. This LCD Projector should never be placed near or over

a radiator or heating vent. The LCD Projector should not
be placed in a built-in installation such as a bookcase
unless proper ventilation is provided.

10. The LCD Projector should be operated only from the type

of power source indicated on the back of the projector or
in the specifications. If you are not sure of the type of
power supplied to your home, consult your LCD Projector
dealer or local power company.

11. Do not place the LCD Projector where the cord will be

abused by persons walking on it.

12. Follow all warnings and instructions marked on the LCD

Projector.

13. To prevent damage to the projector due to lightning and

power-line surges, unplug the projector from the power
outlet, when not in use.

14. Do not overload wall outlets and extension cords with too

many products, because this can result in fire or electric
shock.

15. Never push objects of any kind into the LCD Projector

through the cabinet slots as they may touch high-voltage
points or cause a short circuit. This could result in a fire
or electric shock.

16. Do not attempt to service the LCD Projector yourself.

Opening or removing covers may expose you to dan-
gerous voltage or other hazards. Refer all servicing to
qualified service personnel.

XG-C40XE/CD (E)-a

01.8.1, 5:49 PM

3

Compatible with up to 200 Hz vertical refresh rate, Sync on Green and 

Composite Sync

 signals

for use with a wide variety of high-end PCs and Workstations. (Page 13)

Allows projection of DTV images and 16:9 wide-screen images when connected to a DTV decoder
or similar video systems. (Page 14)

Provides high quality images with minimal dot crawl and cross colour noise.

Equipped with new 3D digital uniformity technology for a clearer, more uniform image.

Digitally adjusts an image that is projected at an angle while maintaining image quality and
brightness. (Page 22)

Allows digital adjustment of 16:9 wide-screen images up or down for easier viewing. (Page 22)

A multi-colour, icon-based menu system allows for simple image adjustments. (Page 25)

The two-colour design along with an intuitive Graphical User Interface (GUI) makes this projector
very easy to set up and adjust.

Automatically makes any necessary adjustments for perfectly synced computer images. (Page 34)

By using intelligent resizing technology, this projector can display higher and lower resolution images in detail without
compromising quality. (Page 38)

With XGA (1,024 

⳯ 768) resolution, this projector can display very detailed presentation information.

UXGA (1,600 

⳯ 1,200) resolution images are intelligently resized to 1,024 ⳯ 768 for full-screen or default presentations.

Allows you to load a custom startup image (i.e. your company logo) to be displayed while the projector is warming up.
(Page 40)

A variety of helpful presentation utilities are incorporated to enhance presentations. These include “Stamp” functions, “Break
Timer”, and “Digital Image Magnification”. (Page 45)

*DTV is the umbrella term used to describe the new digital television system in the united states.

H

L

X

XG-C40XE/CD (E)-a

01.8.1, 5:49 PM

4