DOWNLOAD Sharp XG-C40XE (serv.man15) Service Manual ↓ Size: 15.33 MB | Pages: 115 in PDF or view online for FREE

Model
XG-C40XE (serv.man15)
Pages
115
Size
15.33 MB
Type
PDF
Document
Service Manual
Brand
Device
Projector / Service Manual Complete
File
xg-c40xe-sm15.pdf
Date

Sharp XG-C40XE (serv.man15) Service Manual ▷ View online

36
XG-C40XU/XE
No or unusual Y signal
Yes
No
Go back to the signal processing
block.
No
Check IC801 and its peripheral
circuits.
Yes
No
Check IC803 and its peripheral
circuits as well as IC805 (AGC).
Yes
Check IC803 and its peripheral
circuits.
Is there Y signal output at pin (17) of
IC803?
Is there Y signal output at pin (40) of
IC801?
Is there Y signal input at pin (21) of
IC801?
No or unusual horizontal sync
Yes
No
Check IC801 and its peripheral
circuits.
Yes
No
Is there horizontal sync pulse output
at pin (9) of IC603?
Check the pulse shaping circuit of
IC602 and IC603.
Check IC604 and its peripheral
circuits, and go to "Trouble shooting
table for PC I/F unit".
Is there horizontal sync pulse output
at pin (56) of IC801?
No or unusual vertical sync
No
Check IC801 and its peripheral
circuits.
Yes
Check IC604 and its peripheral
circuits, and go to "Trouble shooting
table for PC I/F unit".
Is there vertical sync pulse output at
pin (4) of IC801?
TROUBLE SHOOTING TABLE 
(Continued)
37
XG-C40XU/XE
Yes
Checking the output PWB unit
Are there signal inputs at
SC1404, SC1405, SC1501 and
SC1502?
Are voltages applied to EA
connectors and SC5502?
Yes
No
No
No
Check IC1401 and their
peripheral circuits.
Are there signal outputs at
pins (14) ,(16) and (18) of
IC1401 ?
Yes
No
Are there signal inputs at pin
(47) of IC1101, IC1201 and
IC1301?
Yes
No
Check IC1101,IC1201,IC1301
and their peripheral circuits.
Are there signal outputs at pins
(17), (19), (21), (28), (30) and
(32) of IC1101, IC1201 and
IC1301?
Yes
Yes
No
Check IC1102,IC1202,IC1302
and their peripheral circuits.
Are there signal outputs at pins
(17), (19), (21), (28), (30) and
(32) of IC1102, IC1202 and
IC1302?
Yes
No
If there is no signal input at
pins (15) and (30) of
SC1101, SC1102 and
SC1103, check IC1409
and their peripheral
circuits.
No
If there is no signal input at
pins (1) and (31) of SC1101,
SC1102 and SC1103, check
the switching circuit and
amplifier circuit of IC1101,
IC1201, IC1301, IC1102,
IC1202, IC1302 and their
peripheral circuits.
Are there signal inputs at
SC1101, SC1201 and
SC1301?
Check IC1106, IC1206,
IC1306, IC1408 and their
peripheral circuits.
Check the R, G and B panels.
If there is no signal at EA
connector or SC5502, go to
Checking the power unitblock.
If there is no signal at SC1404
and SC1405, go to "Trouble
shooting table for PC I/F unit".
If there is no signal at SC1501
and SC1502, go to the video
system block.
Check IC1401 and their
peripheral circuits.
TROUBLE SHOOTING TABLE 
(Continued)
38
XG-C40XU/XE
No audio output
Yes
No
Check the input, the switching circuit
of IC3303 and IC3304, and their
peripheral circuit,SC3001,SC1502,etc.
Are there audio signal inputs at pin
(2) of IC1411?
Yes
No
Check the IC1411 control voltage,and
its peripheral circuits.
Are there audio signal outputs at pin
(2) of P5508?
Yes
No
Check IC7301 and its peripheral
circuits.
Are there audio signal outputs at pin
(6) of IC7301?
Check IC7301 and its peripheral
circuits, and the SP connectors and
speakers.
If the voltage at pin (2) of IC7301 is
not as specified, check Q5501,
Q5502 and their peripheral circuits.
Checkig the Power Unit
There is no voltage output at
EA connector.
Yes
No
No
No
No
No
Yes
Yes
Yes
Yes
Is there any other output
voltage failure?
Is EA connector disconnected
or loose?
Is AC voltage (85-264V)
applied across the PA
connector?
Is TF701 open?
Is R706 open?
Reconnect the EA connector.
Replace F701 or Check
Bimetal SW.
Which output voltage line fails?
Replace ICP751.
Replace R700.
Replace Power
unit.
Replace TF701.
6.7V
TROUBLE SHOOTING TABLE 
(Continued)
39
XG-C40XU/XE
Power on
Yes
No
Is the right input selected?
Select the right input with remote
control.
Yes
No
Are the PC, video and LCP cables as
specified and properly connected?
No
With the contrast control at maximum,
does the image appear?
Use the right cables or reconnect the
cables.
Readjust the video system.
Yes
No
Is the voltage at CON3 (P8502)
connector as specified?
Power circuit faulty.
Yes
Hook up a personal computer.
No
Does the image appear?
Go to "Checking the clock circuit and
its peripheral circuits".
Yes
No
Is the image as specified?
Check the sync signal circuit and its
peripheral circuits.
Yes
No
Is the image's colour as specified?
Check the video circuit and its
peripheral circuits.
Yes
No
Does the on-screen display function?
Go to "Checking the OSD circuit and
its peripheral circuits".
Yes
No
Does the remote control function?
Go to "Checking the remote control".
Yes
End
A
TROUBLE SHOOTING TABLE 
(Continued)
Page of 115
Display

Click on the first or last page to see other XG-C40XE (serv.man15) service manuals if exist.