DOWNLOAD Sharp XG-C335X (serv.man4) Service Manual ↓ Size: 6.5 MB | Pages: 71 in PDF or view online for FREE

The projector employs the DVI digital input terminal for direct input of Digital Video signals from a
computer.

* When using the ø3.5 mm mono audio cable, the volume level will be half of when using the ø3.5 mm stereo audio cable.

Computer

* ø3.5 mm stereo or mono audio cable 

(commercially available or available as 
Sharp service part QCNWGA038WJPZ)

To DVI-D input terminal 

DVI Digital cable 
(commercially available) 

To DVI digital
output terminal

To audio output 
terminal

To AUDIO input terminal 
(for DVI-D)

DVI Digital cable 
(commercially available) 

To audio output 
terminals

ø3.5 mm stereo minijack to RCA audio cable 
(commercially available)

To DVI output terminal

Video Equipment

To DVI-D input terminal 

To AUDIO input terminal 
(for COMPUTER/COMPONENT 2, DVI-D)

To audio output terminal

ø3.5 mm minijack to RCA
audio cable (commercially
available)

3 RCA (Component) to
15-pin D-sub cable
(optional: AN-C3CP2)

To component video output terminal

To COMPUTER/
COMPONENT 1 input terminal

To AUDIO

input terminal

Video Equipment

The image quality is highest in order of the Component signal, the RGB signal, the S-video signal and the
Video signal. If your audio-visual equipment has a component output terminal or RGB output terminal, use the
COMPUTER/COMPONENT terminal 1 or 2 on the projector for video connection.

Note

• Select the input signal type of the video equipment. See page 

(Connecting to COMPUTER/COMPONENT 1 or 2: The illustration shown below is for the former.)

Note

• When you connect video equipment with a 21-pin RGB output (Euro-scart) to the projector, use a com-

mercially available cable that fits in the projector terminal you want to connect.

Note

• When you connect video equipment with a 21-pin RGB output (Euro-scart) to the projector, use a com-

mercially available cable that fits in the projector terminal you want to connect.

RCA audio cable 
(commercially available)

To audio output terminal

To S-video output terminal

S-video cable (commercially available)

To S-VIDEO input terminal

To AUDIO input terminal

Video Equipment

RCA audio cable 
(commercially available)

To audio output terminal

To video output terminal

Composite video cable (commercially available)

To VIDEO input terminal

To AUDIO input terminal

Video Equipment

When the RS-232C terminal on the projector is connected to a computer, the computer can be used to control
the projector and check the status of the projector. Refer to the “SETUP MANUAL” contained on the supplied
CD-ROM for “RS-232C Specifications and Commands”.

Note

• The RS-232C function may not operate if your computer terminal is not correctly set up. Refer to the

operation manual of the computer for details.

• Do not connect the RS-232C cable to a port other than the RS-232C terminal on the computer. This may

damage your computer or projector.

• Do not connect or disconnect an RS-232C serial control cable to or from the computer while it is on. This

may damage your computer.

Computer

To RS-232C terminal

To RS-232C terminal

RS-232C serial control cable (cross type, commercially available)

DIN-D-sub
RS-232C adaptor

DIN-D-sub
RS232C adaptor

Supplied

accessory