DOWNLOAD Sharp PG-MB60X (serv.man32) Service Manual ↓ Size: 697.2 KB | Pages: 14 in PDF or view online for FREE

Check

Problem

Page

Picture is green on

INPUT 1 (COMPONENT)/
INPUT 2 (COMPONENT).

Picture is pink (no green)

on INPUT 1 (RGB)/

INPUT 2 (RGB).

Picture is too bright and

whitish.

The cooling fan
becomes noisy.

The lamp does not light

up even after the

projector turns on.

The lamp suddenly turns

off during projection.

The image sometimes

flickers.

The lamp takes a long

time to turn on.

Picture is dark.

• Change the input signal type setting.

• Image adjustments are incorrectly set.

• When temperature inside the projector increases, the cooling

fan runs faster.

• The lamp indicator is illuminating in red.

Replace the lamp.

• Cables incorrectly connected to the projector or the connected

equipment works improperly.

• If this happens frequently, replace the lamp.
• The lamp will eventually need to be changed.

The lamp has reached the end of its life. Replace the lamp.

46

44

—

62

23,25-28

65

65

This projector is equipped with a microprocessor. Its performance could be adversely affected by
incorrect operation or interference. If this should happen, unplug the projector and plug it in again
after more than 5 minutes.

Sharp Electronics Corporation
1-888-GO-SHARP (1-888-467-4277)
lcdsupport@sharpsec.com
http://www.sharplcd.com

Sharp Electronics of Canada Ltd.
(905) 568-7140
http://www.sharp.ca

Sharp Electronics Corporation Mexico
Branch
(525) 716-9000
http://www.sharp.com.mx

Sharp Electronics Corp. Latin American
Group
(305) 264-2277
www.servicio@sharpsec.com
http://www.siempresharp.com

Sharp Electronics (Europe) GMBH
01805-234675
http://www.sharp.de

Sharp Electronics (U.K.) Ltd.
0161-205-2333
cic@sharp-uk.co.uk
http://www.sharp.co.uk

Sharp Electronics (Italy) S.P.A.
(39) 02-89595-1
http://www.sharp.it

Sharp Electronics France
01 49 90 35 40
hotlineced@sef.sharp-eu.com
http://www.sharp.fr

Sharp Electronica Espana, S.A.
93 5819700
sharplcd@sees.sharp-eu.com
http://www.sharp.es

Sharp Electronics (Schweiz) AG
0041 1 846 63 11
cattaneo@sez.sharp-eu.com
http://www.sharp.ch

Sharp Electronics ( Nordic ) AB
(46) 8 6343600
vision.support@sen.sharp-eu.com
http://www.sharp.se

Sharp Electronics (Europe) GMBH
Branch Office Austria
0043 1 727 19 123
pogats@sea.sharp-eu.com
http://www.sharp.at

SHARP Electronics Benelux BV
0900-SHARPCE (0900-7427723)
Nederland
9900-0159 Belgium
http://www.sharp.nl
http://www.sharp.be
http://www.sharp.lu

Sharp Corporation of Australia
Pty. Ltd.
1300-135-022
http://www.sharp.net.au

Sharp Corporation of New Zealand
(09) 634-2059, (09) 636-6972
http://www.sharpnz.co.nz

Sharp-Roxy Sales (S) Pte. Ltd.
65-226-6556
ckng@srs.global.sharp.co.jp
http://www.sharp.com.sg

Sharp-Roxy (HK) Ltd.
(852) 2410-2623
dcmktg@srh.global.sharp.co.jp
http://www.sharp.com.hk

Sharp Corporation (Taiwan)
0800-025111
http://www.sharp-scot.com.tw

Sharp-Roxy Sales & Service Co.
(60) 3-5125678

Sharp Middle East Fze
971-4-81-5311
helpdesk@smef.global.sharp.co.jp

Sharp Thebnakorn Co. Ltd.
02-236-0170
svc@stcl.global.sharp.co.jp
http://www.sharp-th.com

Sharp Electronics Incorporated of
Korea
(82) 2-3660-2002
lcd@sharp-korea.co.kr
http://www.sharpkorea.co.kr

Sharp Business Systems (India)
Limited
(91) 11- 6431313
service@sharp-oa.com

Multimedia Projector
PG-MB60X
NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/
DTV480I/DTV480P/DTV540P/DTV576I/DTV576P/DTV720P/DTV1035I/DTV1080I
Single Chip Digital Micromirror Device

TM

 (DMD

TM

) by Texas Instruments

Panel size: 0.7"
No. of dots:  786,432 dots (1,024 [H] × 768 [V])
1.5 × electric zoom/focus lens, F2.0–2.5, f = 21.3–31.6 mm
200 W DC lamp
15-pin mini D-sub connector
Y: 1.0 Vp-p, sync negative, 75 Ω terminated
P

B

: 0.7 Vp-p, 75 Ω terminated

P

R

: 0.7 Vp-p, 75 Ω terminated

750 TV lines (DTV720P)
15-pin mini D-sub connector
RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75 Ω terminated
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω
terminated
4-pin mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated
C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated
ø3.5 mm minijack: AUDIO, 0.5 Vrms, more than 22 kΩ (stereo)
4-pin B-type USB female connector
9-pin mini DIN connector
12–108 MHz
43–85 Hz
15–70 kHz
2.0 W (monaural)
4.0 cm × 2.85 cm oval × 1
AC 100–240 V
2.7 A
50/60 Hz
270 W (Standard mode)/220 W (Eco mode) with AC 100 V
255 W (Standard mode)/210 W (Eco mode) with AC 240 V
5 W (AC 100 V) – 6 W (AC 240 V)
1,015 BTU/hour (Standard mode)/960 BTU/hour (Eco mode) with AC 100 V
960 BTU/hour (Standard mode)/760 BTU/hour (Eco mode) with AC 240 V
41°F to 104°F (+5°C to +40°C)
–4°F to 140°F (–20°C to +60°C)
Plastic
38 kHz
12 

7

/

32

" × 3 

33

/

64

" × 11 

7

/

64

" (310 (W) × 89 (H) × 282 (D) mm) (main body only)

12 

7

/

32

" × 4 

7

/

64

" × 11 

5

/

16

" (310 (W) × 104 (H) × 287 (D) mm) (including adjustment foot

and projecting parts)
8.8 lbs. (4.0 kg)
Lamp unit (Lamp/cage module) (AN-MB60LP), Remote control (RRMCGA342WJSA), Power
cord for U.S., Canada, etc. (QACCDA010WJPZ), Power cord for Europe, except U.K.
(QACCVA011WJPZ), Power cord for U.K., Hong Kong and Singapore (QACCBA036WJPZ),
Power cord for Australia, New Zealand and Oceania (QACCLA018WJPZ), RGB cable
(QCNWGA045WJPZ), USB cable (QCNWGA014WJPZ), Storage case (GCASNA014WJSA),
Lens cap (RCAPHA021WJSA), Projector manual and technical reference CD-ROM
(UDSKAA053WJZZ), “QUICK GUIDE” label (TLABZA793WJZZ), Operation manual (TINS-
B526WJZZ)

Product type

Model

Video system

Display method

DMD panel

Lens

Projection lamp

Component input (INPUT 1/2)/

output (OUTPUT) signal

Horizontal resolution

Computer RGB input (INPUT 1/2)/

 output (OUTPUT) signal

Video input signal

(INPUT 3)

S-video input signal

(INPUT 4)

Audio input signal

USB terminal

RS-232C terminal

Pixel clock

Vertical frequency

Horizontal frequency

Audio output

Speaker system

Rated voltage

Input current

Rated frequency

Power consumption

Power consumption (standby)

Heat dissipation

Operating temperature

Storage temperature

Cabinet

I/R carrier frequency

Dimensions (approx.)

Weight (approx.)

Replacement parts

As a part of policy of continuous improvement, SHARP reserves the right to make design
and specification changes for product improvement without prior notice. The performance
specification figures indicated are nominal values of production units. There may be some
deviations from these values in individual units.

Width and height ratio of an image. The normal
aspect ratio of a computer and video image is 4:3.
There are also wide images with an aspect ratio
of 16:9 and 21:9.

Optimizes projected computer images by auto-
matically adjusting certain characteristics.

Initial setting image projected when no signal is
being output.

Projects a 4:3 image fully within a 16:9 screen by
keeping the aspect ratio at 4:3.

Clock adjustment is used to adjust vertical noise
when clock level is incorrect.

Function that can be used to adjust the color tem-
perature to suit the type of image input to the pro-
jector. Decrease the color temperature to create
warmer, reddish images for natural flesh tones,
or increase to create cooler, bluish images for a
brighter picture.

Mode that projects images in their native resolution.

High quality resizing of lower and higher resolu-
tion images to fit the projector’s native resolution.

Mode that can lock the operation of projector but-
tons to prevent unauthorized adjustment.

Function to digitally correct a distorted image
when the projector is set up at an angle, smooth-
ens out jaggies on keystone images and com-
presses the image not only horizontally but verti-
cally keeping the 4:3 aspect ratio.

A password is set so that changes cannot be made
in the “Options2” setting.

Phase shift is a timing shift between isomorphic
signals with the same resolution. When phase level
is incorrect, the projected image typically displays
horizontal flicker.

Image quality enhancement function that offers a
richer image by brightening the darker portions
of the image without altering the brightness of the
brighter portions. You can select four different
modes: STANDARD, PRESENTATION, CINEMA
and GAME.

Allows you to modify or customize the picture dis-
play mode to enhance the input image. You can
select four different modes: NORMAL, DOT BY
DOT, BORDER and STRETCH.

An international standard of color reproduction
regulated by the IEC (International Electrotechnical
Commission). As the fixed color area has been
decided by the IEC, the color changes according
to DLP features, so that the images are displayed
in a natural tint based on an original image, when
“sRGB” is set to “ON”.

Mode that stretches the 4:3 image horizontally to
display it fully on a 16:9 screen.

If the “Keycode” set in the projector is not cor-
rectly entered, the projector will not operate even
if signals are entered.