DOWNLOAD Sharp PG-M20X (serv.man25) Service Manual ↓ Size: 1.41 MB | Pages: 18 in PDF or view online for FREE

Model
PG-M20X (serv.man25)
Pages
18
Size
1.41 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Projector / Basic operation
File
pg-m20x-sm25.pdf
Date

Sharp PG-M20X (serv.man25) User Manual / Operation Manual ▷ View online

Basic Operation
Basic Operation
Image Projection
Basic Procedure
Connect the required external equipment to
the projector before operating the following
procedures.
The language preset at the factory is English.
If you want to change the on-screen display
to another language, reset the language ac-
cording to the procedure on page 
30
.
1
Plug the power cord into the
wall outlet.
• The POWER indicator illuminates up
in red, and the projector enters
standby mode.
2
Press 
 on the projector or
on the remote control.
• The POWER indicator illuminates in
green. After the LAMP REPLACEMENT
indicator  illuminates,  the projector is
ready to start operation.
Note
• The LAMP REPLACEMENT indica-
tor illuminates, indicating the status
of the lamp.
Green: The lamp is ready.
Green blinking: The lamp is
warming up.
Red: The lamp should be replaced.
• If the power is turned off and on right
after again, the LAMP REPLACEMENT
indicator may take time to illuminate.
When  “Anti-Theft” is set, the
keycode input box will appear.
• Enter the keycode.
Note
• When entering the keycode, press
the buttons previously set on the
projector or the remote control.
Info
• When “Anti-Theft” is set, enter the
keycode or the input display will not
appear. Even when the signal is in-
put, the display cannot appear.
Projector indicators
LAMP REPLACEMENT indicator
POWER indicator
POWER button
POWER button
INPUT
button
MENU
button
buttons
ENTER
button
INPUT 1/2/3 buttons
MENU button
 buttons
ENTER button
Keycode input box
-28
Basic Operation
-29
"On-screen Display (Example)
➝➝
Using Analog
RGB
Using
Component
INPUT 2 Mode
   Using S-Video
INPUT 3 Mode
   Using Video
3
Press 
 or 
 on the
remote control to select the
INPUT Mode.
• Pressing 
 on the projector switches
the inputs in the following order:
→ INPUT 1 → INPUT 2 → INPUT 3
Note
• When no signal is received, “NO
SIGNAL” will be displayed. When a
signal that the projector is not pre-
set to receive is received, “NOT
REG.” will be displayed.
About the INPUT Modes
Used for projecting im-
ages from equipment that
sends RGB signals or
Component  signals con-
nected to the DVI-DIGI-
TAL/ANALOG input port.
Used for projecting im-
ages  from equipment
connected to the S-
VIDEO input terminal.
Used for projecting im-
ages   from equipment
connected to the VIDEO
input terminal.
INPUT 1
(RGB/
Component)
INPUT 2
(S-Video)
INPUT 3
(Video)
INPUT 1 Mode
Using
   DVI digital
4
Press 
 or 
 on the remote
control to adjust the volume of
the speaker.
Note
• Pressing 
 will raise the volume.
Pressing 
 will lower the volume.
• On the projector, the volume can be
adjusted by pressing 
 or 
.
 , 
 on the projector operate
as cursor buttons (
) when
selecting setup or adjustment
functions while adjusting menus or
the lens.
VOLUME
buttons
Image Projection (cont.)
POWER
button
5
Press 
 to temporarily turn off
the picture and sound.
Note
• Pressing 
 again will turn the pic-
ture and the sound back on.
6
Press 
, then press 
 again
while the confirmation message
is displayed, to turn off the pro-
jector.
Note
• If you accidentally pressed 
 and
do not want to turn off the power,
wait until the confirmation message
disappears.
Info
• Do not unplug the power cord dur-
ing projection or cooling fan opera-
tion. This can cause damage due
to the rise in internal temperature,
as the cooling fan also stops.
• When connected to equipment such
as an amplifier, be sure to turn off
the power to the equipment con-
nected first and then to the projec-
tor.
Selecting the On-screen
Display Language
• The on-screen display language of the
projector can be set to English, German,
Spanish, Dutch, French, Italian, Swedish,
Portuguese, Chinese, Korean or Japa-
nese.
1
Press 
.
• The menu will be displayed.
2
Press 
 or 
 to select “Lan-
guage”.
AV MUTE button
-30
Page of 18
Display

Sharp PG-M20X (serv.man25) User Manual / Operation Manual ▷ Download

  • DOWNLOAD Sharp PG-M20X (serv.man25) Service Manual ↓ Size: 1.41 MB | Pages: 18 in PDF or view online for FREE
  • Here you can View online or download the User Manual / Operation Manual for the Sharp PG-M20X (serv.man25) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp PG-M20X (serv.man25) Projector. Information contained in Sharp PG-M20X (serv.man25) User Manual / Operation Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.