Sharp PG-M15 (serv.man3) Service Manual ▷ View online
19
PG-M15X
PG-M15S
AN-M15T
3. Disassemble Ballast PWB unit
3-1. Remove two screws and detach Terminal Sheet Holder.
3-2. Remove two screws and detach Grounding Sheet.
3-3. Remove two screws and detach AC Code Fix.
3-4. Remove two screws and detach ignitor cable from Lamp Housing.
3-5. Remove two screws and detach Ballast PWB unit.
3-2. Remove two screws and detach Grounding Sheet.
3-3. Remove two screws and detach AC Code Fix.
3-4. Remove two screws and detach ignitor cable from Lamp Housing.
3-5. Remove two screws and detach Ballast PWB unit.
AC Code Fix
Grounding Sheet
Terminal Sheet Holder
Ballast PWB unit
3-2
3-3
3-4
3-1
3-5
20
PG-M15X
PG-M15S
AN-M15T
4. Disassemble Lamp Housing
4-1. Loosen two screws and remove Lamp Cover.
4-2. Loosen three screws and lift Lamp.
4-3. Remove screw and detach Output Air Guide and Output Rubber duct.
4-4. Remove three screws and detach Lamp Housing.
4-5. Remove screw and nut then detach Fan from Lamp Housing.
4-6. Remove four screws and detach Blower Wind Guide from Lamp Housing.
4-7. Remove thermal Fuse from lamp Housing.
4-2. Loosen three screws and lift Lamp.
4-3. Remove screw and detach Output Air Guide and Output Rubber duct.
4-4. Remove three screws and detach Lamp Housing.
4-5. Remove screw and nut then detach Fan from Lamp Housing.
4-6. Remove four screws and detach Blower Wind Guide from Lamp Housing.
4-7. Remove thermal Fuse from lamp Housing.
Lamp Housing
Lamp Cover
Blower Wind
Guide
Guide
Lamp
Bottom Cover
Output
Air Guide
Air Guide
Output
Rubber duct
Rubber duct
Spacer
Fan
4-1
4-4
4-5
4-7
4-6
4-3
4-2
Thermal
Fuse
Fuse
21
PG-M15X
PG-M15S
AN-M15T
4-8. Remove screw and detach SW PWB unit and Interlock Protection Cover.
4-9. Remove screw and detach Thermal Switch.
4-9. Remove screw and detach Thermal Switch.
4-9
SW PWB unit
Thermal
Switch 70
Switch 70
°
Interlock Protection Cover
Bottom Cover
4-8
4-8
22
PG-M15X
PG-M15S
AN-M15T
5. Disassemble Fan Module
5-1. Remove two Hexagon Copper Sticker and detach Assy Fan.
5-2. Remove two screws and detach Exhaust Window Assy.
5-3. Remove two screws and detach Fan and Rubber.
5-2. Remove two screws and detach Exhaust Window Assy.
5-3. Remove two screws and detach Fan and Rubber.
5-1
5-2
5-3
Exhaust Window
Fan Ass'y
Hexagon Copper Sticker
Rubber
Rubber
Fan
Fan
Click on the first or last page to see other PG-M15 (serv.man3) service manuals if exist.