Sharp PG-M15 (serv.man3) Service Manual ▷ View online
15
PG-M15X
PG-M15S
AN-M15T
2. Disassemble Optical Engine Module
2-1. Remove 4 screws from main PWB unit.
2-2. Using a ball end hexagonal driver, loosen 2 screws holding terminal sheet holder.
2-2. Using a ball end hexagonal driver, loosen 2 screws holding terminal sheet holder.
(approx. 4 rotation)(Step 8.)
2-3. Place a tool in between main PWB unit and formatter PWB unit and disconnect the connector. (Step 9.)
2-4. Pull the main unit outwards and remove main PWB unit. (Step 10,11.)
2-4. Pull the main unit outwards and remove main PWB unit. (Step 10,11.)
DC to DC PWB Unit
2-1
2-1
Step 8
Step 9
2-2
2-3
Step 10
Step 11
2-4
16
PG-M15X
PG-M15S
AN-M15T
Cut three cable tie
from Optical Engine
Module.
from Optical Engine
Module.
Step 12
Step 13
Unplug three
Connecting Cords
of DC to DC PWB Unit
Connecting Cords
of DC to DC PWB Unit
2-5
2-5. Remove one screw of DC to DC PWB Unit Holder, unplug three Connecting Cords, and then detach DC to
DC PWB Unit.
(Step 12,13.)
(Step 12,13.)
2-6. Remove push bar, push bar spring, and rubber. (refer to step 14~16.)
Step 14
Step 15
Step 16
2-6
2-6
17
PG-M15X
PG-M15S
AN-M15T
2-7. Unplug six wires of Thermal PWB Unit. (Step 17.)
2-8. Remove 5 screws from optical engine module (Step 18~20.)
2-9. Remove 2 screws from projection lens cover. (Step 21.)
2-10. Remove optical engine module, projection lens cover, and Thermal Unit. (Step 22, 23.)
2-8. Remove 5 screws from optical engine module (Step 18~20.)
2-9. Remove 2 screws from projection lens cover. (Step 21.)
2-10. Remove optical engine module, projection lens cover, and Thermal Unit. (Step 22, 23.)
Step 18
Step 19
2-8
2-8
Step 20
Step 21
2-9
Step 22
Step 23
2-10
Step 17
2-7
18
PG-M15X
PG-M15S
AN-M15T
Optical Engine Module
Thermal PWB Unit
Projection Lens Cover
DMD Off-Light Vent
2-7
2-8
2-6
2-9
Speaker
Push Bar Spring
Pudh Bar
Leakage Rubber