Sharp PG-M15 (serv.man11) User Manual / Operation Manual ▷ View online
51
Appendix
Pin No.
Signal
Name
1
VCC (USB)
USB Power
2
RD
Receive Data
3
SD
Send Data
4
USB (
)
USB Data (
)
5
GND
Signal Ground
6
USB (
)
USB Data (
)
7
NC
(Reserved)
RS-232C Terminal: 7-pin Mini DIN female connector
4
6
7
5
3
2
1
OUTPUT (INPUT 1) Signal Port: 15-pin Mini D-sub female connector
RGB output
Analog
1 Video output (red)
2 Video output
2 Video output
(green/
sync on green
)
3 Video output (blue)
4 Not connected
5 Not connected
6 Earth (red)
7 Earth (green/sync on green)
8 Earth (blue)
9 Not connected
4 Not connected
5 Not connected
6 Earth (red)
7 Earth (green/sync on green)
8 Earth (blue)
9 Not connected
10 GND
11 GND
12 Not connected
13 Horizontal sync signal
14 Vertical sync signal
15 Not connected
11 GND
12 Not connected
13 Horizontal sync signal
14 Vertical sync signal
15 Not connected
11
6
1
1
15
10
5
10
5
Connection Pin Assignments
COMPONENT output
Analog
1 P
R
(C
R
)
2 Y
3 P
3 P
B
(C
B
)
4 Not connected
5 Not connected
6 Earth (P
5 Not connected
6 Earth (P
R
)
7 Earth (Y)
8 Earth (P
8 Earth (P
B
)
9 Not connected
10 Not connected
11 Not connected
12 Not connected
13 Not connected
14 Not connected
15 Not connected
11 Not connected
12 Not connected
13 Not connected
14 Not connected
15 Not connected
RS-232C Port: 9-pin D-sub male connector of the DIN-D-sub RS-232C cable
Pin No.
Signal
Name
1
CD
2
RD
Receive Data
3
SD
Send Data
4
ER
5
SG
Signal Ground
6
DR
Data Set Ready
7
RS
Request to Send
8
CS
Clear to Send
9
CI
USB connector: 4-pin USB connector of the USB mouse control cable
Pin No.
Signal
Name
1
VCC
USB Power
2
USB
USB Data
3
USB
USB Data
4
SG
Signal Ground
1
5
6
9
4 3 2 1
52
Appendix
PC control
A computer can be used to control the projector by connecting an RS-232C cable (null modem, cross type, sold
separately) to the projector. (See page 17 for connection.)
separately) to the projector. (See page 17 for connection.)
Communication conditions
Set the serial port settings of the computer to match that of the table.
Signal format:
Signal format:
Conforms to RS-232C standard.
Baud rate:
9,600 bps
Data length:
8 bits
Parity bit:
NON
Stop bit:
1 bit
Flow control:
None
Basic format
Commands from the computer are sent in the following order: command, parameter, and return code. After the
projector processes the command from the computer, it sends a response code to the computer.
projector processes the command from the computer, it sends a response code to the computer.
RS-232C Port Specifications
Return code (0DH)
C1 C2 C3 C4 P1 P2 P3 P4
Response code format
Normal response
O K
Return code (0DH)
Problem response (Failure due to incorrect command/parameter or the other communication errors)
E R R
Return code (0DH)
Command 4-digit
Parameter 4-digit
Command format
When more than one code is being sent, send each command only after the OK response code for the previous
command from the projector is verified.
command from the projector is verified.
• When using the computer control function of the projector, the projector operating status cannot be read to the computer.
Therefore, confirm the status by transmitting the display commands for each adjustment menu and checking the status with
the On-screen Display. If the projector receives a command other than a menu display command, it will execute the com-
mand without displaying the On-screen Display.
the On-screen Display. If the projector receives a command other than a menu display command, it will execute the com-
mand without displaying the On-screen Display.
Commands
EXAMPLE
• When INPUT SWITCHING is set to INPUT 1 (DVI).
→
←
I
R
G
B
_
1
_
_
O
K
Projector
Computer
• If an underbar (_) appears in the parameter column, enter a space.
P
P
I
I
I
I
I
O
O
R
R
R
V
V
W
W
G
G
G
E
E
R
R
B
B
B
D
D
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
0
1
1
2
3
1
2
POWER OFF (STANDBY)
POWER ON
INPUT1 (DVI)
INPUT1 (RGB)
INPUT1 (COMPONENT)
INPUT2 (S-VIDEO)
INPUT3 (VIDEO)
INPUT SWITCHING
POWER SETTING
CONTROL ITEM
COMMAND
C1 C2 C3 C4
P1
P2
P3 P4
PARAMETER
CONTROL
CONTENTS
53
Appendix
Horizontal Frequency: 31.5–80 kHz
Vertical Frequency: 56–85 Hz
Pixel Clock: 25–135 MHz
Compatible with sync on green and
Vertical Frequency: 56–85 Hz
Pixel Clock: 25–135 MHz
Compatible with sync on green and
composite sync
signals
SXGA (1,280
1,024) compatible in intelligent compression
XGA (1,024
768) compatible in intelligent compression (PG-M15S only)
Computer
Compatibility
Chart
PC/
MAC/
WS
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
VGA
PC
SVGA
XGA
VESA
Standard
Resolution
640
350
1,152
864
1,152
882
1,280
1,024
720
350
640
400
720
400
640
480
800
600
1,024
768
Display
M15S
Display
M15X
Upscale
Upscale
True
Upscale
Upscale
True
Intelligent
Compression
Intelligent
Compression
True
27.0
60
27.0
60
27.0
60
60
31.5
70
31.5
70
31.5
70
31.5
60
34.7
70
37.9
72
37.5
75
43.3
85
31.3
50
35.1
56
37.9
60
44.5
70
48.1
72
46.9
75
53.7
85
31.5
70
37.9
85
37.9
27.0
85
37.9
85
26.2
50
Intelligent
Compression
55.0
60
67.5
75
65.9
72
54.8
60
64.0
60
SXGA
MAC 16"
MAC 21"
PC/
MAC 13"
PC/
MAC 19"
640
480
832
624
Upscale
35.0
1,152
870
68.7
67
60.0
1,024
768
VGA
SVGA
SXGA
XGA
Intelligent
Compression
48.4
60
75
49.7
75
75
66.2
70
35.5
43
40.3
50
60.0
75
68.7
85
56.5
70
48.4
60
• This projector may not be able to display images from notebook computers in simultaneous (CRT/LCD) mode. Should this
occur, turn off the LCD display on the notebook computer and output the display data in “CRT only” mode. Details on how
to change display modes can be found in your notebook computer’s operation manual.
to change display modes can be found in your notebook computer’s operation manual.
• This projector can receive 640
350 VESA format VGA signals, however, “640 400” will appear on the screen.
54
Appendix
Specifications
Product type
Model
Video system
Display method
DMD panel
Lens
Projection lamp
Contrast ratio
Video input signal
S-video input signal
Component input signal
Horizontal resolution
Computer RGB input signal
Pixel clock
Vertical frequency
Horizontal frequency
Audio input signal
Audio output
Speaker system
Rated voltage
Input current
Rated frequency
Power consumption
Power dissipation
Operating temperature
Storage temperature
Cabinet
I/R carrier frequency
Dimensions (approx.)
Weight (approx.)
Supplied accessories
Replacement parts
Digital Multimedia Projector
PG-M15X/PG-M15S
NTSC/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM/DTV480i
Single Chip Digital Micromirror Device™ (DMD™) by Texas Instruments
Panel size: 0.7
PG-M15X/PG-M15S
NTSC/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM/DTV480i
Single Chip Digital Micromirror Device™ (DMD™) by Texas Instruments
Panel size: 0.7
(17.8 mm), 1 chip XGA DMD/SVGA DMD
No. of dots: 786,432 dots (1,024 [H]
768 [V])/PG-M15X
480,000 dots (800 [H]
600 [V])/PG-M15S
1-1.2 X zoom lens, F2.2–2.4, f
28.5–34.2 mm
High Intensity Discharge Lamp (HID Lamp), AC 120 W
500:1
RCA Connector (INPUT 3): VIDEO, composite video, 1.0 Vp-p, sync negative, 75
500:1
RCA Connector (INPUT 3): VIDEO, composite video, 1.0 Vp-p, sync negative, 75
Ω
terminated
4-pin Mini DIN connector (INPUT 2)
Y (luminance signal): 1.0 Vp-p, sync negative, 75
4-pin Mini DIN connector (INPUT 2)
Y (luminance signal): 1.0 Vp-p, sync negative, 75
Ω terminated
C (chrominance signal): Burst 0.286 Vp-p, 75
Ω terminated
29-pin Connector (INPUT 1)
Y: 1.0 Vp-p, sync negative, 75
Y: 1.0 Vp-p, sync negative, 75
Ω terminated
P
B
: 0.7 Vp-p, 75
Ω terminated
P
R
: 0.7 Vp-p, 75
Ω terminated
700 TV lines (video input)
29-pin
29-pin
CONNECTOR
(INPUT 1)
RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75
Ω terminated
H
ORIZONTAL
SYNC
.
SIGNAL
: TTL level (positive/negative)
V
ERTICAL
SYNC
.
SIGNAL
: Same as above
25–135 MHz
56–85 Hz
31.5–80 kHz
3.5 ø M
56–85 Hz
31.5–80 kHz
3.5 ø M
INIJACK
: AUDIO, 0.4 Vrms, more than 47 k
Ω (stereo)
2.0 W (monaural)
4
4
2.8 cm
AC 100–240 V
2.0 A
50/60 Hz
180 W
<680 BTU/hour
41°F to 95°F (
2.0 A
50/60 Hz
180 W
<680 BTU/hour
41°F to 95°F (
5°C to 35°C)
14°F to 140°F (
10°C to 60°C)
Magnesium alloy (Terminal panel, Lamp cover and Side vent cover constructed of plastic)
38 kHz
8
38 kHz
8
55
⁄
64
1
31
⁄
32
6
59
⁄
64
(225 (W) 50 (H) 176 (D) mm) (main body only)
8
55
⁄
64
2
19
⁄
32
6
31
⁄
32
(225 (W) 66 (H) 177 (D) mm) (including adjustment feet
and projecting parts)
3.5 lbs (1.6 kg)
Remote control, Two AAA size batteries, Power cord for U.S., Canada etc. (5
3.5 lbs (1.6 kg)
Remote control, Two AAA size batteries, Power cord for U.S., Canada etc. (5
11, 1.8 m),
Power cord for Europe, except U.K. (5
11, 1.8 m), Power cord for U.K., Hong Kong and
Singapore (5
11, 1.8 m), Power cord for Australia, New Zealand and Oceania (5 11, 1.8
m), DVI-Analog to VGA cable (5
11, 1.8 m), DVI-Analog to VGA adaptor, PC audio cable
(6
7, 2.0 m), DIN-D-sub RS-232C cable (6
1
/
2
, 16.5 cm), Computer RGB cable (5 11,
1.8 cm), USB mouse control cable (5
11, 1.8 m), Video cable (5 11, 1.8 m), S-video
cable (5
11, 1.8 m), AV audio cable (5 11, 1.8 m), Soft carrying pouch, Lenscap with
strap, CD-ROM, Projector operation manual, Projector quick reference guide
Remote control (9HJ7583104001), AAA size battery (9HJ4683101001), Power cord for
U.S., Canada etc. (9HJ4283114001), Power cord for Europe, except U.K.
(9HJ4283116001), Power cord for U.K., Hong Kong and Singapore (9HJ4283117001),
Power cord for Australia, New Zealand and Oceania (9HJ4283118001), DVI-Analog to
VGA cable (9HJ4283119001), DVI-Analog to VGA adaptor (9HJ4283124001), PC audio
cable (9HJ4283120001), DIN-D-sub RS-232C cable (9HJ4283123001), Computer RGB
cable (9HJ4283111001), USB mouse control cable (9HJ4283122001), Video cable
(9HJ4283112001), S-video cable (9HJ4283113001), AV audio cable (9HJ4283121001),
Soft carrying pouch (9HJ5383101001), Lens cap with strap (9HJ7083117001), CD-ROM
(9HJ3683104001), Projector operation manual (9HJ3683107001), Projector quick
reference guide (9HJ3683110001)
Remote control (9HJ7583104001), AAA size battery (9HJ4683101001), Power cord for
U.S., Canada etc. (9HJ4283114001), Power cord for Europe, except U.K.
(9HJ4283116001), Power cord for U.K., Hong Kong and Singapore (9HJ4283117001),
Power cord for Australia, New Zealand and Oceania (9HJ4283118001), DVI-Analog to
VGA cable (9HJ4283119001), DVI-Analog to VGA adaptor (9HJ4283124001), PC audio
cable (9HJ4283120001), DIN-D-sub RS-232C cable (9HJ4283123001), Computer RGB
cable (9HJ4283111001), USB mouse control cable (9HJ4283122001), Video cable
(9HJ4283112001), S-video cable (9HJ4283113001), AV audio cable (9HJ4283121001),
Soft carrying pouch (9HJ5383101001), Lens cap with strap (9HJ7083117001), CD-ROM
(9HJ3683104001), Projector operation manual (9HJ3683107001), Projector quick
reference guide (9HJ3683110001)
This unit has some inactive pixels within acceptable tolerances which
may result in inactive dots on the picture screen. This will not affect
the picture quality or the life expectancy of the unit.
may result in inactive dots on the picture screen. This will not affect
the picture quality or the life expectancy of the unit.
This SHARP projector uses a DMD panel. This very sophisticated
panel contains 786,432 (PG-M15X)/480,000 (PG-M15S) pixels. As
with any high technology electronic equipment such as large screen
TVs, video systems and video cameras, there are certain acceptable
tolerances that the equipment must conform to.
panel contains 786,432 (PG-M15X)/480,000 (PG-M15S) pixels. As
with any high technology electronic equipment such as large screen
TVs, video systems and video cameras, there are certain acceptable
tolerances that the equipment must conform to.
Specifications are subject to change without notice.
Click on the first or last page to see other PG-M15 (serv.man11) service manuals if exist.