Sharp PG-M15 (serv.man11) User Manual / Operation Manual ▷ View online
Setup & Connections
12
Supplied Accessories
Supplied Accessories
Remote control
9HJ7583104001
9HJ7583104001
Two AAA size batteries
9HJ4683101001
9HJ4683101001
USB mouse control cable
9HJ4283122001
9HJ4283122001
Computer RGB cable
9HJ4283111001
9HJ4283111001
Soft carrying pouch
9HJ5383101001
9HJ5383101001
Power cord
For U.S., Canada etc.
9HJ4283114001
9HJ4283114001
For Europe, except U.K.
9HJ4283116001
9HJ4283116001
For U.K., Hong Kong
and Singapore
9HJ4283117001
and Singapore
9HJ4283117001
For Australia, New
Zealand and Oceania
9HJ4283118001
Zealand and Oceania
9HJ4283118001
• Depending on the region, projectors only ship with one power cord (See above). Use the power cord that corresponds to the wall
outlet in your country.
PC audio cable
9HJ4283120001
9HJ4283120001
DVI-Analog to VGA adaptor
9HJ4283124001
9HJ4283124001
DVI-Analog to VGA cable
9HJ4283119001
9HJ4283119001
Video cable
9HJ4283112001
9HJ4283112001
S-video cable
9HJ4283113001
9HJ4283113001
AV audio cable
9HJ4283121001
9HJ4283121001
DIN-D-sub RS-232C cable
9HJ4283123001
9HJ4283123001
(1)
(2)
(3)
(4)
Lenscap with strap
9HJ7083117001
9HJ7083117001
Optional Cables
DVI digital cable (9
⬘10⬙, 3.0 m)
AN-C3DVU
HD-15/RCA cable (9
⬘10⬙, 3.0 m)
AN-C3CP
RS-232C cable (32
⬘10⬙, 10.0 m)
AN-C10RS
CD-ROM
9HJ3683104001
9HJ3683104001
Projector operation manual
9HJ3683107001
9HJ3683107001
Projector quick reference guide
9HJ3683110001
9HJ3683110001
Setup & Connections
13
Connecting the Power Cord
Plug the supplied power cord into the AC socket on the side of the projector.
Power cord
Connecting the Projector
CAUTION
• Make sure you connect the power cord firmly into the AC socket.
Connecting the Projector to a Computer
You can connect your projector to a computer for projection of full color computer images.
Connecting a computer to the projector using the DVI digital cable—Digital connection instructions
1 Connect one end of the DVI digital cable (sold
separately) to the DVI-DIGITAL/ANALOG INPUT 1 port
on the projector.
on the projector.
2 Connect the other end to the Monitor output port (DVI)
on the computer. Secure the connectors by tightening
the thumb screws.
the thumb screws.
3 To use the built-in audio system, connect one end of
the supplied PC audio cable to the AUDIO INPUT
terminal on the projector.
terminal on the projector.
4 Connect the other end to the audio output terminal on
the computer.
CAUTION
• Before connecting, be sure to turn both the projector and the
computer off. After making all connections, turn the projector
on first. The computer should always be turned on last.
on first. The computer should always be turned on last.
• Please read the computer’s operation manual carefully.
• Refer to page 53 “Computer Compatibility Chart” for a list of
• Refer to page 53 “Computer Compatibility Chart” for a list of
computer signals compatible with the projector. Use with
computer signals other than those listed may cause some of
the functions not to work.
computer signals other than those listed may cause some of
the functions not to work.
• This DVI port is DVI version 1.0 compatible. Therefore when the
signal is input from copy guard system compatible (DVI version
2.0) equipment, no signal will be received.
2.0) equipment, no signal will be received.
PC audio cable
Computer
Projector
PC audio cable
1
4
2
3
DVI digital cable
(sold separately)
Model name AN-C3DVU
Projecting the image
When connecting with this method,
press INPUT on the remote control or
the projector and select the input signal
type to INPUT 1 DVI (Digital).
When connecting with this method,
press INPUT on the remote control or
the projector and select the input signal
type to INPUT 1 DVI (Digital).
Setup & Connections
14
Connecting the Projector
Connecting a computer to the projector using the DVI-Analog to VGA adaptor or the DVI-Analog
to VGA cable—Analog connection instructions
to VGA cable—Analog connection instructions
1 Connect one end of the supplied computer RGB cable
using the supplied DVI-Analog to VGA adaptor to the
DVI-DIGITAL/ANALOG INPUT 1 port on the projector,
or connect the DVI side of the supplied DVI-Analog to
VGA cable to the DVI-DIGITAL/ANALOG INPUT 1 port
on the projector.
DVI-DIGITAL/ANALOG INPUT 1 port on the projector,
or connect the DVI side of the supplied DVI-Analog to
VGA cable to the DVI-DIGITAL/ANALOG INPUT 1 port
on the projector.
2 Connect the other end of the computer RGB cable or
the VGA side of the DVI-Analog to VGA cable
to the
computer. Secure the connectors by tightening the
thumb screws.
thumb screws.
3 To use the built-in audio system, connect one end of
the supplied PC audio cable to the AUDIO INPUT
terminal on the projector.
terminal on the projector.
4 Connect the other end to the audio output terminal on
the computer.
CAUTION
• Before connecting, be sure to turn both the projector and the
computer off. After making all connections, turn the projector
on first. The computer should always be turned on last.
on first. The computer should always be turned on last.
• Please read the computer’s operation manual carefully.
• Refer to page 53 “Computer Compatibility Chart” for a list of
• Refer to page 53 “Computer Compatibility Chart” for a list of
computer signals compatible with the projector. Use with
computer signals other than those listed may cause some of
the functions not to work.
computer signals other than those listed may cause some of
the functions not to work.
• A Macintosh adaptor may be required for use with some
Macintosh computers. Contact your nearest Sharp Authorized
Projector Dealer or Service Center.
Projector Dealer or Service Center.
Computer RGB cable
PC audio cable
DVI-Analog to VGA cable
DVI-Analog to VGA
adaptor
adaptor
Projector
PC audio cable
Connecting other compatible computers
“Plug and Play” function
• This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC compatible
computer will communicate their setting requirements, allowing for quick and easy setup.
• Before using the “Plug and Play” function, be sure to turn on the projector first and the connected computer last.
• The DDC, Plug and Play function of this projector operates only when used in conjunction with a VESA DDC compatible
computer.
When connecting the projector to a compatible computer other than an IBM-PC (VGA/SVGA/XGA/SXGA) or
Macintosh (i.e. Workstation), a separate cable may be needed. Please contact your dealer for more information.
Macintosh (i.e. Workstation), a separate cable may be needed. Please contact your dealer for more information.
• Connecting computers other than the recommended types may result in damage to the projector, the computer, or both.
Computer RGB cable
DVI-Analog to VGA adaptor
1
2
Computer
DVI-Analog to VGA cable
3
4
Projecting the image
When connecting with this method,
press INPUT on the remote control or
the projector and select the input signal
type to INPUT 1 Computer/Analog
RGB.
When connecting with this method,
press INPUT on the remote control or
the projector and select the input signal
type to INPUT 1 Computer/Analog
RGB.
Setup & Connections
15
Connecting the Projector
Connecting the Projector to Video Equipment
You can connect your projector to a VCR, laser disc player and other audiovisual equipment.
CAUTION
• Always turn off the projector while connecting to audiovisual equipment, in order to protect both the projector and the
equipment being connected.
Connecting a video source (VCR or laser disc player) using the standard video input
S-video cable
1 Connect the supplied S-video cable to the S-VIDEO
INPUT 2 terminal on the projector and the S-video output
terminal on the video source, or connect the supplied
video cable to the VIDEO INPUT 3 terminal on the
projector and the video output terminal on the video
source.
terminal on the video source, or connect the supplied
video cable to the VIDEO INPUT 3 terminal on the
projector and the video output terminal on the video
source.
2 To use the built-in audio system, connect the supplied
AV audio cable to the AUDIO INPUT terminal on the
projector and the audio output terminals on the video
source.
projector and the audio output terminals on the video
source.
The S-VIDEO INPUT 2 terminal uses a video signal system
in which the picture is separated into a color and a
luminance signal to realize a higher-quality image.
in which the picture is separated into a color and a
luminance signal to realize a higher-quality image.
• For higher quality video, you may use the S-VIDEO INPUT 2
terminal on the projector.
• If your video equipment does not have an S-video output
terminal, use the composite video output terminal.
2
1
S-video cable
AV audio cable
VCR or
Laser disc player
Projecting the image
• When connecting to the S-VIDEO
• When connecting to the S-VIDEO
INPUT 2 terminal on the projector,
press INPUT on the remote control
or the projector and select the input
signal type to INPUT 2 S-VIDEO.
press INPUT on the remote control
or the projector and select the input
signal type to INPUT 2 S-VIDEO.
• When connecting to the VIDEO
INPUT 3 terminal on the projector,
press INPUT on the remote control
or the projector and select the input
signal type to INPUT 3 VIDEO.
press INPUT on the remote control
or the projector and select the input
signal type to INPUT 3 VIDEO.
Video cable
1
Projector
2
To S-video output terminal
AV audio cable
To audio output terminals
Video cable
To video output terminal
Click on the first or last page to see other PG-M15 (serv.man11) service manuals if exist.