Sharp PG-M10SE (serv.man23) Service Manual / Technical Bulletin ▷ View online
LV057
Sharp Electronics (UK) Ltd., Technical Services Group
1. Model
PG-M10SE/M10XE
2. General
No power, Power indicator does not light up.
3. Cause
The damaged R129 on the DC Power Supply Unit (9FU770507000).
4. Servicing
When you repair the sets with above defect, please replace the following parts.
Refer to the attached instructions sheet.
1) Replace Q106 with new one (9FU91130Q106).
2) Replace Q107 with new one (9FU91130Q106).
3) Replace R129 with new one (9FU91130R129).
4) Replace F101 with new one (9FU91130F101).
5) Replace Lamp Cover Ass’y (#75) with new type (9FU770820711).
Refer to the attached instructions sheet.
1) Replace Q106 with new one (9FU91130Q106).
2) Replace Q107 with new one (9FU91130Q106).
3) Replace R129 with new one (9FU91130R129).
4) Replace F101 with new one (9FU91130F101).
5) Replace Lamp Cover Ass’y (#75) with new type (9FU770820711).
Also, when you repair the sets with other defect, replace Lamp Cover Ass'y (#75)
with new type(9FU770820711).
with new type(9FU770820711).
This parts kit contains the following component parts.
NO POWER - POWER INDICATOR DOES NOT
LIGHT UP
TECHNICAL BULLETIN
Date:
19 November 2002
Model: PGM10SE/PGM10XE
Ref.:
Ref.:
003
Colour: White
Page:
Page:
1 of 3
LV057
Sharp Electronics (UK) Ltd., Technical Services Group
Parts replacement procedure on the DC Power Supply Unit
1) Parts needed
This parts kit contains the following parts.
2) Procedure
1) Replace Q106 with new one (9FU91130Q106).
2) Replace Q107 with new one (9FU91130Q106).
3) Replace R129 with new one (9FU91130R129).
4) Replace F101 with new one (9FU91130F101).
5) Replace Lamp Cover Ass’y (#75) with new type (9FU770820711).
2) Replace Q107 with new one (9FU91130Q106).
3) Replace R129 with new one (9FU91130R129).
4) Replace F101 with new one (9FU91130F101).
5) Replace Lamp Cover Ass’y (#75) with new type (9FU770820711).
3) Pictures of each parts.
Q106, Q107
LV057
Sharp Electronics (UK) Ltd., Technical Services Group
Display