DOWNLOAD Sharp PG-C30XE (serv.man4) Service Manual ↓ Size: 997.63 KB | Pages: 43 in PDF or view online for FREE

In the interests of user-safety (Required by safety regulations in some countries) the set should be restored
to its original condition and only parts identical to those specified should be used.

Im lnteresse der Benutzersicherheit (erforderliche Sicherheitsregeln in einigen Ländern) muß das Gerät in seinen
Originalzustand  gebracht werden.  Außerdem dürfen für die spezifizierten Bauteile nur identische Teile verwendet
werden.

Page

»

NOTE TO SERVICE PERSONNEL ............................ 2

»

SPECIFICATIONS ...................................................... 3

»

OPERATION MANUAL ............................................... 4

»

REMOVING OF MAJOR PARTS .............................. 10

»

RESETTING THE TOTAL LAMP TIMER .................. 15

»

THE OPTICAL UNIT OUTLINE ................................ 16

»

CONVERGENCE AND FOCUS ADJUSTMENT ........ 17

»

ELECTRICAL ADJUSTMENT ................................... 22

»

ADJUSTING THE PC BOARD ................................. 28

»

TROUBLE SHOOTING TABLE ................................ 29

»

CHASSIS LAYOUT ................................................... 86

»

BLOCK DIAGRAM .................................................... 88

»

OVERALL WIRING DIAGRAM .................................. 90

»

DESCRIPTION OF SCHEMATIC DIAGRAM ............. 92

»

WAVEFORMS ........................................................... 93

»

SCHEMATIC DIAGRAM ........................................... 94

»

PRINTED WIRING BOARD ASSEMBLIES ............ 136

»

PARTS LIST

Ë

ELECTRICAL PARTS ........................................ 144

Ë

CABINET AND MECHANICAL PARTS .............. 164

Ë

ACCESSORIES PARTS .................................... 170

Ë

PACKING PARTS ............................................... 170

»

PACKING OF THE SET .......................................... 171

Seite

»

HINWEISE FÜR DAS WARTUNGSPERSONAL ...... 44

»

TECHNISCHE DATEN ............................................. 45

»

BEDIENUNGSANLEITUNG ..................................... 46

»

ENTFERNEN DER HAUPTTEILE ............................ 52

»

NULLSTELLUNG DES LAMPEN-
BETRIEBSSTUNDENZÄHLERS (GESAMTZEIT) .... 57

»

ÜBERSICHT DER OPTIKEINHEIT .......................... 58

»

EINSTELLUNG VON KONVERGENZ UND
BRENNPUNKT ......................................................... 59

»

ELEKTRISCHE EINSTELLUNG ............................... 64

»

EINSTELLUNG DER PC-PLATINE .......................... 70

»

FEHLERSUCHTABELLE .......................................... 71

»

CHASSIS-ANORDNUNG ......................................... 86

»

BLOCKSCHALTBILD ................................................ 88

»

GESAMTSCHALTPLAN ........................................... 90

»

BESCHREIBUNG DES SCHEMATISCHEN
SCHALTPLANS ........................................................ 92

»

WELLENFORMEN ................................................... 93

»

SCHEMATISCHER SCHALTPLAN .......................... 94

»

LEITERPLATTENEINHEITEN ................................ 136

»

ERSATZTEILLISTE

Ë

ELEKTRISCHE BAUTEILE ................................ 144

Ë

GEHÄUSE UND MECHANISCHE BAUTEILE ... 164

Ë

ZUBEHÖRTEILE ................................................ 170

Ë

VERPACKUNGSTEILE ...................................... 170

»

VERPACKEN DES GERÄTS .................................. 171

S80H3PG-C30XE

12345678901234567890123456789012123456789012345

12345678901234567890123456789012123456789012345

12345678901234567890123456789012123456789012345

12345678901234567890123456789012123456789012345

12345678901234567890123456789012123456789012345

1

2

Lamp

Reflector

SHARP

1. Be sure to wear sun-glasses when servicing the

projector with the lamp
turned “on” and the top
enclosure removed.

2. Do not operate the lamp outside of the lamp housing.

3. Do not operate for more than 2 hours with the

enclosure removed.

1. Be sure to disconnect the AC plug when replacing

the lamp.

2. Allow one hour for the unit to cool down before

servicing.

3. Replace only with same type lamp. Type

CLMPF0066DE01 or BQC-PGC30XE/1 rated
85V/ 200W.

4. The lamp emits small amounts of UV-Radiation,

avoid direct-eye contact.

5. The medium pressure lamp involves a risk of

explosion. Be sure to follow installation instructions
described below and handle the lamp with care.

Ë

Since the lamp reaches a very high temperature during
units operation replacement of the lamp should be
done at least one hour after the power has been turned
off.  (to allow the lamp to cool off.)
Installing the new lamp, make sure not to touch the
lamp (bulb) replace the lamp by holding its reflector

2 

.

[Use original replacement only.]

DANGER !  –– Never turn the power on without
the lamp to avoid electric-shock or damage of the
devices since the stabilizer generates high voltages
at its start.

Since small amounts of UV-Radiation are emitted
from an opening between the duct cover and the
lamp housing, it is recommended to place the LENS
CAP on the opening during servicing to avoid eye
and skin exposurem (Fig. 1).

Note: Please obtain a lens cap before servicing a

model PG-C30XE that is received without one.

LENS CAP

Product type

Model

Video system

Display method

LCD panel

Lens

Projection lamp

Contrast ratio

Video input signal

S-video input signal

Horizontal resolution

Audio output

Computer RGB input signal

Pixel clock

Vertical frequency

Horizontal frequency

Computer control signal

Speaker system

Rated voltage

Input current

Rated frequency

Power consumption

Operating temperature

Storage temperature

Cabinet

I/R carrier frequency

Laser pointer of remote control

Dimensions (approx.)

Weight (approx.)

Supplied accessories

Replacement parts

LCD Projector
PG-C30XE
PAL/SECAM/NTSC 3.58/NTSC 4.43/DTV 480P/DTV 720P/DTV 1080I
LCD panel 

×

 3, RGB optical shutter method

Panel size: 22.9 mm (0.9") (13.9 [H] 

×

 18.5 [W] mm)

Display method: Translucent TN liquid crystal panel
Drive method: TFT (Thin Film Transistor) Active Matrix panel
No. of dots: 786,432 dots (1,024 [H] 

×

 768 [V])

1–1.3 

×

 zoom lens, F1.7–2.0, f = 33–43 mm

DC 200 W lamp
250:1
RCA Connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 

Ω

 terminated

RCA Connector: AUDIO, 0.5 Vrms more than 22 k

Ω

 (stereo)

4-pin Mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75 

Ω

 terminated

C (chrominance signal): Burst 0.286 Vp-p, 75 

Ω

 terminated

560 TV lines (video input), 750 TV lines (DTV 720P input, Dot by Dot)
2 W (monaural)
15-

PIN

 

MINI

 D-

SUB

 

CONNECTOR

 (INPUT 1, 2):

RGB separate/composite sync/sync on green type analog input: 0–0.7 Vp-p, positive,
75 

Ω

 terminated

S

TEREO

 M

INIJACK

: AUDIO, 0.5 Vrms, more than 22 k

Ω

 (stereo)

H

ORIZONTAL

 

SYNC

. 

SIGNAL

: TTL level (positive/negative) or composite sync (Apple only)

V

ERTICAL

 

SYNC

. 

SIGNAL

: Same as above

12–230 MHz
43–200 Hz
15–126 kHz
9-pin Mini DIN female connector (RS-232C Input Port)
8 cm (3 

3

⁄

32

") round

AC 110–120/220–240 V
3.0 A/1.5 A
50/60 Hz
300 W
+ 5

°

C to + 40

°

C

– 20

°

C to + 60

°

C

Plastic
38 kHz
Wave length: 650 nm / Max. output: 1 mW / Class 

II

 Laser Product

229 

×

 121 

×

 310 mm (W 

×

 H 

×

 D) (main body only)

243.5 

×

 134 

×

 358.4 mm (W 

×

 H 

×

 D) (including adjustment feet and projecting parts)

4.8 kg
Remote control, Two AA size batteries, Power cord (1.8m), Computer RGB cable (3 m),
Computer audio cable (3 m), PS/2 mouse control cable (1 m), USB mouse control cable
(1.5 m), DIN-D-sub RS-232C cable (15 cm), Remote mouse receiver, Extra air filter, Lens
cap (attached), CD-ROM, LCD projector operation manual, LCD projector quick
references, Sharp Advanced Presentation Software operation manual
Lamp unit (Lamp/cage module) (BQC-PGC30XE/1), Remote control (RRMCG1584CESA),
AA size batteries, Power cord, Computer RGB cable (QCNW-5304CEZZ), Computer audio
cable (QCNW-4870CEZZ), PS/2 mouse control cable (QCNW-5113CEZZ), USB mouse
control cable (QCNW-5680CEZZ), DIN-D-sub RS-232C cable (QCNW-5288CEZZ), Remote
mouse receiver (RUNTK0673CEZZ), Air filter (PFILD0076CEZZ), Lens cap
(GCOVH1307CESB), CD-ROM (UDSKA0021CEN1), LCD projector operation manual
(TINS-7046CEZZ), LCD projector quick references (TINS-7048CEZZ, TINS-7152CEZZ,
TINS-7153CEZZ), Sharp Advanced Presentation Software operation manual (TINS-
7069CEZZ)

This unit has some inactive TFTs within acceptable tolerances which
may result in illuminated or inactive dots on the picture screen. This
will not affect the picture quality or the life expectancy of the unit.

This SHARP projector uses LCD (Liquid Crystal Display) panels. These
very sophisticated panels contain 786,432 pixels ( 

×

 RGB) TFTs (Thin

Film Transistors). As with any high technology electronic equipment
such as large screen TVs, video systems and video cameras, there
are certain acceptable tolerances that the equipment must conform
to.

Specifications are subject to change without notice.

Foot release

VOLUME buttons (+ / – )

MENU button

ENTER button

UNDO button

GAMMA button

RESIZE button

AUTO SYNC button

MUTE button

KEYSTONE button

BLACK SCREEN button

ENLARGE button

FREEZE button

INPUT button

POWER buttons (ON/OFF)

POWER indicator

ADJUSTMENT buttons

TEMPERATURE WARNING
indicator

LAMP REPLACEMENT
indicator

Carrying handle

Zoom knob

Remote control sensor

Kensington Security Standard
connector

INPUT 1 port (HD 15)

Cooling fan (Exhaust vent)

RS-232C port (9-pin Mini DIN)

AUDIO INPUT 3 terminals (RCA)

OUTPUT port for INPUT 1, 2 (HD 15)

Speaker

AC socket

INPUT 2 port (HD 15)

AUDIO OUTPUT terminal
(3.5mm stereo minijack)

AUDIO INPUT terminal
for INPUT 1, 2
(3.5 mm stereo minijack)

S-VIDEO INPUT terminal
(4-pin Mini DIN)

VIDEO INPUT 3 terminal
(RCA)

Focus knob

Air filter/Cooling fan (Intake vent)

Remote control sensor

(

'

/

"

/

\

/

|

)