DOWNLOAD Sharp PG-C30XE (serv.man15) Service Manual ↓ Size: 1.85 MB | Pages: 103 in PDF or view online for FREE

Model
PG-C30XE (serv.man15)
Pages
103
Size
1.85 MB
Type
PDF
Document
Driver / Update
Brand
Device
Projector / SAPS English Manual
File
pg-c30xe-sm15.pdf
Date

Sharp PG-C30XE (serv.man15) Driver / Update ▷ View online

9
Installing/
Uninstalling
Required Hardware and Software
Sharp Advanced Presentation Software Professional Edition
requires the following hardware and software for operation.
PC running under Microsoft Windows 95, 98, NT4.0 Workstation,
Me, 2000 Professional, XP Home or Professional Edition
*
Operations are confirmed with Japanese and English versions of those
Windows operating systems only.
CPU
233 MHz Pentium or higher is recommended.
Display
800 
×
 600 dot display capable of displaying
65,536 colors or more
Memory
64 MB or more (Windows 95/98/NT4.0/Me/2000)
128 MB or more (Windows XP)
Hard disk free space
50 MB or more
Interface
RS-232C
 serial port for transferring images and
controlling the projector
CD-ROM drive
Note that this software may not operate normally if the serial port settings,
etc., are not correct when serial equipment other than projectors is also
connected to the computer.
Using infrared communications (
IrCOM
)
If you use the NV5/6/7 projector, transferring images can be performed
using infrared communications (IrCOM). The PC requires a built-in infrared
communications port or an external infrared communications adapter.
● For Windows 95 users:
Microsoft 
IrDA
 2.0 (Infrared Driver) must be installed on your PC
to use this software. If it is not installed, you can obtain it from
the Microsoft’s site on the Internet.
● For Windows 98 users:
Microsoft Windows 98 supports IrDA communications as a
default program.
Please consult to Microsoft operation manual for more details.
● For Windows NT4.0 Workstation, Me, 2000 Professional, XP
Home or Professional Edition users:
Infrared communications (IrCOM) cannot be used.
● The transmission speed of infrared communications is
dependent on the IrDA version of the PC.
IrDA 1.0 : 9,600 bps - 115.2 kbps
IrDA 1.1 : 4 Mbps
Therefore the actual speed depends on the IrDA version your PC
supports.
See the computer’s instruction manual for the IrDA specifications.
We cannot guarantee that the software will operate on computers whose
motherboards have been changed or modified, or on computers that
the users have configured themselves.
10
Projector and PC Connections
This software requires the use of an RS-232C serial cable, LAN cable
or infrared communications. For details on PC connections, refer to the
projector’s operation manual.
CAUTION
Before connecting, be sure to turn both the projector and the computer
off. After making all connections, turn the projector on first. The computer
should always be turned on last.
● Please read the computer’s instruction manual carefully.
● If you use the NV5/6/7 projector, image transfer by using infrared
communications can be available.
Connecting Multiple Projectors with PC
When connecting multiple projectors using 
ID
 numbers
(when forming a network system consisting only of XG-V10
Series and XG-P20X and XG-P25X projectors)
PC
OUT
OUT
OUT
IN
IN
IN
IN
IN
OUT
IN
3F
2F
1F
B1
● The connection between PC and the Projector or the Projector and
the Projector is possible by using the projector’s RS-232C IN/OUT
terminal.
● Up to 250 projectors can be connected.
● Up to 99 
COM
 ports can be used.
● Daisy chain connections are possible.
LAN
 connections are possible only with models from the XG-V10
series with the optional extension board (AN-L10T) installed.
● See “Table of Functions by Model” (
page 92
) about the projector’s
available functions.
11
Installing/
Uninstalling
When connecting multiple projectors without using ID
numbers (When forming a network including projectors other
than the XG-V10 Series and XG-P20X and XG-P25X
projectors)
PC
IN
IN
IN
PC
PC
3F
2F
1F
● Up to 198 projectors can be connected.
● Up to 99 COM ports can be used.
● Up to 99 LAN ports can be used.
● Daisy chain connections are not possible.
● LAN connections are possible only with models from the XG-V10
series with the optional extension board (AN-L10T) installed.
● See “Table of Functions by Model” (
page 92
) about the projector’s
available functions.
Connect one projector per COM port.
If you want to use the connection via the COM ports, the same number
of COM ports as the projectors is needed. If the number of COM ports
built in your PC is less than the number of projectors, purchase the
extension board (commercially available) to add COM ports to your PC.
Connecting Single Projector with PC
RS-232C connection
Refer to the
projector’s operation
manual for details.
Optional RS-232C cable (cross type)
12
Installing the Software
This software can be installed using the installation program supplied
on the “Sharp Advanced Presentation Software Professional Edition
CD-ROM”
.
1
Make sure that this software is suited for your computer.
For details, refer to “Required Hardware and Software” (
page 9
).
2
Quit all running applications before installing this
software.
Be sure to quit all other applications so that no problems occur with
the installer.
3
Delete the previous version of the Sharp Advanced
Presentation Software.
For details, refer to “Uninstalling the Software” (
page 19
).
4
Insert the “Sharp Advanced Presentation Software
Professional Edition CD-ROM” in the CD-ROM drive.
5
Double click the “My Computer” icon or select Windows
Explorer.
6
Double click the CD-ROM drive icon in the “My Computer”
or in Windows Explorer.
7
Double click the “SAPS_PRO” folder.
8
Double click the “SETUP1.EXE” icon.
| The  “Sharp Advanced Presentation Software Professional
Edition” Opening Image will be displayed.
Page of 103
Display

Click on the first or last page to see other PG-C30XE (serv.man15) service manuals if exist.