Sharp PG-B10S Handy Guide ▷ View online
Options
Version 1.5
Issue 04/2006
Issue 04/2006
17
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
UK Options
Sales Code
Description
AN-MR1EL
Remote Receiver
AN-B10T
Ceiling Mount Bracket
AN-TK201
High Ceiling Installation
AN-TK202
Standard Ceiling Installation
AN-MR1EL
AN-B10T
AN-TK202
AN-TK201
Setting up the Screen
Position the projector perpendicular to the screen with all feet flat and level to achieve an
optimal image.
optimal image.
Note
•
The projector lens should be centred in the middle of the screen. If the horizontal line
passing through the lens centre is not perpendicular to the screen, the image will be
distorted, making viewing difficult.
passing through the lens centre is not perpendicular to the screen, the image will be
distorted, making viewing difficult.
•
For optimal image, position the screen so that it is not in direct sunlight or room light.
Light falling directly on the screen washes out the colours, making viewing difficult. Close
the curtains and dim the lights when setting up the screen in a sunny or bright room.
Light falling directly on the screen washes out the colours, making viewing difficult. Close
the curtains and dim the lights when setting up the screen in a sunny or bright room.
•
A polarising screen cannot be used with this projector.
Options
Version 1.5
Issue 04/2006
Issue 04/2006
18
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Screen Size and Projection Distance
Standard Set-up (Front Projection)
•
Place the projector at the required distance from the screen
according to the desired picture size.
according to the desired picture size.
Example of Standard Set-up
•
The
distance from the screen to the
projector may vary depending on the size
of the screen.
of the screen.
•
The default setting can be used, when
placing the projector in front of the screen.
If the projected image is reversed or
inverted, readjust the setting to “Front” in
“PRJ Mode”.
placing the projector in front of the screen.
If the projected image is reversed or
inverted, readjust the setting to “Front” in
“PRJ Mode”.
•
Place the projector so that an imaginary
horizontal line that passes through the
centre of the lens is perpendicular to the
screen.
horizontal line that passes through the
centre of the lens is perpendicular to the
screen.
Options
Version 1.5
Issue 04/2006
Issue 04/2006
19
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Projecting a Reversed/Inverted Image
Projection from behind the screen
•
Place a translucent screen between the projector and the audience.
•
Reverse the image by setting “Rear” in “PRJ Mode”.
Projection using a mirror
•
Place a mirror (normal flat type) in front of the lens.
Note
When using a mirror, be sure to carefully position both the projector and the mirror so the light does not
shine into the eyes of the audience.
shine into the eyes of the audience.
Ceiling-mount set-up
•
It is recommended that you use the optional Sharp ceiling mount bracket for this
installation. Before mounting the projector, contact your nearest Sharp Authorised
Projector Dealer or Service Centre to obtain the recommended ceiling-mount bracket
(sold separately.) AN-B10T ceiling-mount bracket, its AN-TK201 and ANTK202
extension tubes (for countries other than the U.S.A. and GERMANY).
installation. Before mounting the projector, contact your nearest Sharp Authorised
Projector Dealer or Service Centre to obtain the recommended ceiling-mount bracket
(sold separately.) AN-B10T ceiling-mount bracket, its AN-TK201 and ANTK202
extension tubes (for countries other than the U.S.A. and GERMANY).
•
Be sure to adjust the position of the projector to match the distance (H) from the lens
centre position to the lower edge of the image, when mounting the projector on the
ceiling.
centre position to the lower edge of the image, when mounting the projector on the
ceiling.
•
DO NOT invert the projector.
Options
Version 1.5
Issue 04/2006
Issue 04/2006
20
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Click on the first or last page to see other PG-B10S service manuals if exist.