DOWNLOAD Sharp PG-B10S (serv.man30) Service Manual ↓ Size: 10.43 MB | Pages: 127 in PDF or view online for FREE

1) Prepare the RS232C cross cable and conversion cable at hand.

1. Connections

Connect the RS232C cross cable to a computer (Windows98 and higher OS), and the conversion cable to the
set.

2. Do not connect the AC power cord yet at this time.

2) Upgrading procedure

1. For upgrading the PG-B10S, use the "Flash Upgrader" program.
2. Decompress the attached file, and a folder is created.
3. Double-click on "FlashUpgrader.exe", and the following window appears

4. Click on the "Choose" button, and the following window appears.

5. Click on the arrow mark shown above, and select the decompressed folder.

6. Select "pwSDK.inf" in the folder.

7. Double-click on "pwSDK.inf".

Note:
Do not put checkmark the "Continuous Flash Mode" and "Notify On Completion" boxes, but put checkmark the
"Reset Target After Download" box, all in Options.
Put checkmark the "Flash" box in Modes.

8. Click on "Flash".

The above screen shows up to get ready to write the program.

9. Now connect the AC power cord, and the program will be written. Wait for 4 minutes or so until the writing is

completed.
Do not disconnect the AC cord by at this time . Below windows is underwriting.

With the writing complete, the following screen shows up.

Click on "Close", and the upgrading ends.
The set may or may not get started itself. But disconnect and reconnect the AC power cord, and get the set started.
After up grade, OSD is in Japanese, Background is set None and Eco mode is ON.
So, change OSD is Englis, Background is set to SHARP and Eco mode is off, (Or, set to "SS3". However, lamp time
is also in this case.)