Sharp PG-A10X (serv.man30) User Manual / Operation Manual ▷ View online
-24
STRETCH Mode (16:9)
Picture (Screen) size
Projection distance (L)
Distance from the lens center
Diag. (
χ)
Width
Height
Maximum (L1)
Minimum (L2)
to the bottom of the image (H)
250" (635 cm) 218" (553 cm) 123" (311 cm)
35' 1" (10.7 m)
29' 2"
(8.9 m)
–4
33
/
64
" (–11.5 cm)
225" (572 cm) 196" (498 cm) 110" (280 cm)
31'10"
(9.7 m)
26' 3"
(8.0 m)
–4
1
/
16
" (–10.3 cm)
200" (508 cm) 174" (443 cm)
98" (249 cm)
28' 3"
(8.6 m)
23' 3"
(7.1 m)
–3
39
/
64
"
(–9.2 cm)
150" (381 cm) 131" (332 cm)
74" (187 cm)
21'
(6.4 m)
17' 5"
(5.3 m)
–2
45
/
64
"
(–6.9 cm)
133" (338 cm) 116" (294 cm)
65" (166 cm)
18' 8"
(5.7 m)
15' 5"
(4.7 m)
–2
13
/
32
"
(–6.1 cm)
106" (269 cm) 92" (235 cm)
52" (132 cm)
14' 9"
(4.5 m)
12' 6"
(3.8 m)
–1
59
/
64
"
(–4.9 cm)
100" (254 cm) 87" (221cm)
49" (125 cm)
14' 1"
(4.3 m)
11' 6"
(3.5 m)
–1
13
/
16
"
(–4.6 cm)
92" (234 cm) 80" (204 cm)
45" (115 cm)
12'10"
(3.9 m)
10' 10"
(3.3 m)
–1
21
/
32
"
(–4.2 cm)
84" (213 cm) 73" (186 cm)
41" (105 cm)
11'10"
(3.6 m)
9' 10"
(3.0 m)
–1
33
/
64
"
(–3.9 cm)
72" (183 cm) 63" (159 cm)
35" (90 cm)
10' 2"
(3.1 m)
8' 2"
(2.5 m)
–1
19
/
64
"
(–3.3 cm)
60" (152 cm) 52" (133 cm)
29" (75 cm)
8' 2"
(2.5 m)
6' 11"
(2.1 m)
–1
5
/
64
"
(–2.8 cm)
40" (102 cm) 35" (89 cm)
20" (50 cm)
5' 7"
(1.7 m)
4' 7"
(1.4 m)
–
23
/
32
"
(–1.8 cm)
Note
• There may be an error of ± 3% in the above values.
• Values with a minus (–) sign indicate the distance from the lens center below the bottom of the image.
The formula for picture size and
projection distance
χ: Picture size (diag.) (in)
projection distance
χ: Picture size (diag.) (in)
[Feet/inches]
L1 (ft) = (0.0396χ – 0.0546) / 0.3048
L2 (ft) = (0.0330χ – 0.0546) / 0.3048
H (in) = 0.0606χ
L2 (ft) = (0.0330χ – 0.0546) / 0.3048
H (in) = 0.0606χ
[m/cm]
L1 (m) = 0.0396χ – 0.0546
L2 (m) = 0.0330χ – 0.0546
H (cm) = 0.0606χ
L2 (m) = 0.0330χ – 0.0546
H (cm) = 0.0606χ
× 2.54
The formula for picture size and
projection distance
χ: Picture size (diag.) (in)
projection distance
χ: Picture size (diag.) (in)
[Feet/inches]
L1 (ft) = (0.04314χ – 0.0546) / 0.3048
L2 (ft) = (0.03595χ – 0.0546) / 0.3048
H (in) = – 0.01807χ
L2 (ft) = (0.03595χ – 0.0546) / 0.3048
H (in) = – 0.01807χ
[m/cm]
L1 (m) = 0.04314χ – 0.0546
L2 (m) = 0.03595χ – 0.0546
H (cm) = – 0.01807χ
L2 (m) = 0.03595χ – 0.0546
H (cm) = – 0.01807χ
× 2.54
NORMAL Mode (4:3)
Picture (Screen) size
Projection distance (L)
Distance from the lens center
Diag. (
χ)
Width
Height
Maximum (L1)
Minimum (L2)
to the bottom of the image (H)
300" (762 cm) 240" (610 cm) 180" (457 cm)
38' 9" (11.8 m)
32' 2"
(9.8 m)
18
3
/
16
" (46.2 cm)
250" (635 cm) 200" (508 cm) 150" (381 cm)
32' 2"
(9.8 m)
26'11" (8.2 m)
15
5
/
32
" (38.5 cm)
200" (508 cm) 160" (406 cm) 120" (305 cm)
25'11"
(7.9 m)
21' 4"
(6.5 m)
12
1
/
8
" (30.8 cm)
150" (381 cm) 120" (305 cm)
90" (229 cm)
19' 4"
(5.9 m)
16' 1"
(4.9 m)
9
3
/
32
" (23.1 cm)
100" (254 cm) 80" (203 cm)
60" (152 cm)
12'10"
(3.9 m)
10' 6"
(3.2 m)
6
1
/
16
" (15.4 cm)
84" (213 cm) 67" (170 cm)
50" (128 cm)
10'10"
(3.3 m)
8'10" (2.7 m)
5
3
/
32
" (12.9 cm)
72" (183 cm) 58" (147 cm)
43" (110 cm)
9' 2"
(2.8 m)
7' 7"
(2.3 m)
4
23
/
64
" (11.1 cm)
60" (152 cm) 48" (122 cm)
36" (91 cm)
7' 7"
(2.3 m)
6' 3"
(1.9 m)
3
41
/
64
"
(9.2 cm)
40" (102 cm) 32" (81 cm)
24" (61 cm)
4'11"
(1.5 m)
4' 3"
(1.3 m)
2
27
/
64
"
(6.2 cm)
Setup
H
Screen
L:Projection distance
Lens center
Base line:
Horizontal line passing through the lens center
Horizontal line passing through the lens center
Screen Size and Projection Distance
Connections and Setup
-25
When using the default setting.
▼On-screen Display
The image is reversed.
When using the default setting.
▼On-screen Display
The image is inverted.
Projecting a Reversed/Inverted Image
Projection from behind the Screen
■ Place a translucent screen between the projector and the
audience.
■ Reverse the image by setting “Rear” in the “PRJ Mode” menu.
See page
50
for use of this function.
Projection Using a Mirror
■ Place a mirror (normal flat type) in front of the lens.
Info
• When using a mirror, be sure to carefully position both the
projector and the mirror so the light does not shine into the
eyes of the audience.
eyes of the audience.
Ceiling-mount Setup
■ It is recommended that you use the optional Sharp ceiling-
mount bracket for this installation.
Before mounting the projector, contact your nearest Sharp
Authorized Projector Dealer or Service Center to obtain the
recommended ceiling-mount bracket (sold separately.)
• AN-PGCM95 ceiling-mount bracket, its AN-EP101B
Before mounting the projector, contact your nearest Sharp
Authorized Projector Dealer or Service Center to obtain the
recommended ceiling-mount bracket (sold separately.)
• AN-PGCM95 ceiling-mount bracket, its AN-EP101B
extension tube and AN-JT299 universal bracket, adaptor
for non-level ceiling installation (for U.S.A.).
for non-level ceiling installation (for U.S.A.).
• BB-A10T ceiling adaptor, its BB-NVHOLDER280, BB-
• AN-A10T ceiling-mount bracket, its AN-TK201 and AN-
TK202 extension tubes (for countries other than the U.S.A.
and GERMANY).
and GERMANY).
■ Be sure to adjust the position of the
projector to match the distance (H)
from the lens center position (see page
from the lens center position (see page
24
) to the lower edge of the image,
when mounting the projector on the
ceiling.
ceiling.
■ Invert the image by setting
“Ceiling+Front” in the
“PRJ Mode” menu. See
page
“PRJ Mode” menu. See
page
50
for use of this
function.
Connections and Setup
-25
When using the default setting.
▼On-screen Display
The image is reversed.
When using the default setting.
▼On-screen Display
The image is inverted.
Projecting a Reversed/Inverted Image
Projection from behind the Screen
■ Place a translucent screen between the projector and the
audience.
■ Reverse the image by setting “Rear” in the “PRJ Mode” menu.
See page
50
for use of this function.
Projection Using a Mirror
■ Place a mirror (normal flat type) in front of the lens.
Info
• When using a mirror, be sure to carefully position both the
projector and the mirror so the light does not shine into the
eyes of the audience.
eyes of the audience.
Ceiling-mount Setup
■ It is recommended that you use the optional Sharp ceiling-
mount bracket for this installation.
Before mounting the projector, contact your nearest Sharp
Authorized Projector Dealer or Service Center to obtain the
recommended ceiling-mount bracket (sold separately.)
• AN-PGCM95 ceiling-mount bracket, its AN-EP101B
Before mounting the projector, contact your nearest Sharp
Authorized Projector Dealer or Service Center to obtain the
recommended ceiling-mount bracket (sold separately.)
• AN-PGCM95 ceiling-mount bracket, its AN-EP101B
extension tube and AN-JT299 universal bracket, adaptor
for non-level ceiling installation (for U.S.A.).
for non-level ceiling installation (for U.S.A.).
• BB-A10T ceiling adaptor, its BB-NVHOLDER280, BB-
• AN-A10T ceiling-mount bracket, its AN-TK201 and AN-
TK202 extension tubes (for countries other than the U.S.A.
and GERMANY).
and GERMANY).
■ Be sure to adjust the position of the
projector to match the distance (H)
from the lens center position (see page
from the lens center position (see page
24
) to the lower edge of the image,
when mounting the projector on the
ceiling.
ceiling.
■ Invert the image by setting
“Ceiling+Front” in the
“PRJ Mode” menu. See
page
“PRJ Mode” menu. See
page
50
for use of this
function.
Connections and Setup
-25
When using the default setting.
▼On-screen Display
The image is reversed.
When using the default setting.
▼On-screen Display
The image is inverted.
Projecting a Reversed/Inverted Image
Projection from behind the Screen
■ Place a translucent screen between the projector and the
audience.
■ Reverse the image by setting “Rear” in the “PRJ Mode” menu.
See page
50
for use of this function.
Projection Using a Mirror
■ Place a mirror (normal flat type) in front of the lens.
Info
• When using a mirror, be sure to carefully position both the
projector and the mirror so the light does not shine into the
eyes of the audience.
eyes of the audience.
Ceiling-mount Setup
■ It is recommended that you use the optional Sharp ceiling-
mount bracket for this installation.
Before mounting the projector, contact your nearest Sharp
Authorized Projector Dealer or Service Center to obtain the
recommended ceiling-mount bracket (sold separately.)
• AN-PGCM95 ceiling-mount bracket, its AN-EP101B
Before mounting the projector, contact your nearest Sharp
Authorized Projector Dealer or Service Center to obtain the
recommended ceiling-mount bracket (sold separately.)
• AN-PGCM95 ceiling-mount bracket, its AN-EP101B
extension tube and AN-JT299 universal bracket, adaptor
for non-level ceiling installation (for U.S.A.).
for non-level ceiling installation (for U.S.A.).
• BB-A10T ceiling adaptor, its BB-NVHOLDER280, BB-
• AN-A10T ceiling-mount bracket, its AN-TK201 and AN-
TK202 extension tubes (for countries other than the U.S.A.
and GERMANY).
and GERMANY).
■ Be sure to adjust the position of the
projector to match the distance (H)
from the lens center position (see page
from the lens center position (see page
24
) to the lower edge of the image,
when mounting the projector on the
ceiling.
ceiling.
■ Invert the image by setting
“Ceiling+Front” in the
“PRJ Mode” menu. See
page
“PRJ Mode” menu. See
page
50
for use of this
function.
