DOWNLOAD Sharp PG-A10S (serv.man5) Service Manual ↓ Size: 248.49 KB | Pages: 6 in PDF or view online for FREE

Model
PG-A10S (serv.man5)
Pages
6
Size
248.49 KB
Type
PDF
Document
Service Manual
Brand
Device
Projector
File
pg-a10s-sm5.pdf
Date

Sharp PG-A10S (serv.man5) Service Manual ▷ View online

9
PG-A10S
PG-A10S-SL
AN-A10T
Operation Manual
Power ON/OFF 
buttons
For turning the power on or off.
Power indicator
Illuminates red when the 
projector is in standby. 
When the power is turned 
on, this indicator will 
illuminate green.
Lamp replacement 
indicator
Illuminates green indicating 
normal function. Replace 
the lamp when the indicator 
illuminates red.
Temperature warning 
indicator
When the internal 
temperature rises, this 
indicator will illuminate red.
Remote control
sensor
INPUT button
For switching input mode 
1, 2 or 3.
KEYSTONE button
For entering the Keystone 
Correction mode.
AUTO SYNC button
For automatically
adjusting images when 
connected to a computer.
Volume buttons
For adjusting the speaker 
sound level or the 
Keystone Correction.
Zoom knob
Focus ring
Speaker
Foot release
Front adjustment
foot
Front adjustment foot
Air filter/cooling 
fan (Intake vent) 
(on the bottom of 
the projector)
Exhaust vent
Foot release 
(on the side of 
the projector)
Projector (Front and Top View)
Attaching and removing the lens cap
• Press on the two buttons of the lens cap
and attach it to the lens, then release the
buttons to lock it in place.
• Press on the two buttons of the lens cap
and remove it from the lens.
10
PG-A10S
PG-A10S-SL
AN-A10T
AC socket
Rear adjustment 
foot
(on the bottom of 
the projector)
Intake vent
Kensington Security 
Standard connector
INPUT 1 terminal
Terminal for 
computer RGB and 
component signals.
RS-232C terminal
For controlling
the projector using a 
computer.
AUDIO INPUT 
terminal
Shared audio input 
terminal for INPUT 
1, 2 and 3.
INPUT 2 terminal
Terminal for 
connecting video 
equipment with an 
S-video terminal.
INPUT 3 terminal
Terminal for 
connecting video 
equipment.
Projector (Rear View)
Using the Kensington Lock
• This projector has a
Kensington Security Stan-
dard connector for use with
a Kensington MicroSaver
Security System. Refer to
the information that came
with the system for instruc-
tions on how to use it to se-
cure the projector.
11
PG-A10S
PG-A10S-SL
AN-A10T
Power ON/OFF buttons
For turning the power on or off.
MENU button
For displaying adjustment and 
setting screens.
Adjustment buttons
(
'
,
"
,
\
,
|
)
For selecting menu items.
KEYSTONE button
For entering the Keystone 
Correction mode.
UNDO button
For undoing an operation or 
returning to the previous display.
FORWARD/BACK buttons
Same function as the [Page Down] 
and [Page Up] keys on a computer 
keyboard when using the Remote 
Receiver (optional).
ENLARGE (Enlarge/Reduce) 
buttons
For enlarging or reducing part of 
the image.
AUTO SYNC button
For automatically adjusting images 
when connected to a computer.
Volume buttons
For adjusting the speaker sound 
level.
INPUT buttons
For switching to the respective 
input modes.
FREEZE button
For freezing images.
RESIZE button
For switching the screen size 
(NORMAL, BORDER, etc).
AV MUTE button
For temporarily displaying the 
black screen and turning off the 
sound.
ENTER button
For setting items selected or 
adjusted on the menu.
Remote Control (Front View)
12
PG-A10S
PG-A10S-SL
AN-A10T
Inserting the Batteries
The batteries (two R-6 batteries (“AA” size, UM/
SUM-3, HP-7 or similar)) are supplied in the
package.
1
Press the 
 mark on the cover
and slide it in the direction of the
arrow.
2
Insert the batteries.
• Insert the batteries making sure the po-
larities correctly match the 
 and 
marks inside the battery compartment.
3
Attach the cover and slide it un-
til it clicks into place.
Incorrect use of the batteries may cause them to leak or explode. Please follow the precautions below.
Caution
• Insert the batteries making sure the polarities correctly match the 
 and 
 marks inside the battery compart-
ment.
• Batteries of different types have different properties, therefore do not mix batteries of different types.
• Do not mix new and old batteries.
This may shorten the life of new batteries or may cause old batteries to leak.
• Remove the batteries from the remote control once they have run out, as leaving them in can cause them to leak.
Battery fluid from leaked batteries is harmful to skin, therefore be sure to first wipe them and then remove them
using a cloth.
• The batteries included with this projector may run down in a short period, depending on how they are kept. Be
sure to replace them as soon as possible with new batteries.
• Remove the batteries from the remote control if you will not be using the remote control for a long time.
Usable Range
Remote
control
signal
transmitters 
Remote control sensor
Remote control
23' (7 m)
30
°
30
°
45
°
The remote control can be used to control
the projector within the ranges shown in
the illustration.
Note
• The signal from the remote control can be re-
flected off a screen for easy operation. How-
ever, the effective distance of the signal may
differ depending on the screen material.
When using the remote control:
• Be sure not to drop, expose to moisture or high
temperature.
• The remote control may malfunction under a
fluorescent lamp. In this case, move the pro-
jector away from the fluorescent lamp.
Page of 6
Display

Sharp PG-A10S (serv.man5) Service Manual ▷ Download

  • DOWNLOAD Sharp PG-A10S (serv.man5) Service Manual ↓ Size: 248.49 KB | Pages: 6 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp PG-A10S (serv.man5) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp PG-A10S (serv.man5) Projector. Information contained in Sharp PG-A10S (serv.man5) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.