DOWNLOAD Sharp PG-A10S (serv.man27) Service Manual ↓ Size: 967.41 KB | Pages: 14 in PDF or view online for FREE

Model
PG-A10S (serv.man27)
Pages
14
Size
967.41 KB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Projector / Basic operation
File
pg-a10s-sm27.pdf
Date

Sharp PG-A10S (serv.man27) User Manual / Operation Manual ▷ View online

-26
Image Projection
Keycode input box
Basic Procedure
Connect the required external equipment to the pro-
jector before carrying out the following procedures.
Info
• The language preset at the factory is English.
If you want to change the on-screen display to
another language, reset the language accord-
ing to the procedure on page 
28
.
1
Plug the power cord into the wall
outlet.
• The power indicator illuminates red, and
the projector enters standby mode.
2
Press 
 on the projector or
 on the remote control.
• The power indicator illuminates green.
After the lamp replacement indicator illu-
minates and the warming up message
on the display disappears, the projector
is ready to start operation.
Note
• The lamp replacement indicator illumi-
nates, indicating the status of the lamp.
Green: The lamp is ready.
Blinking in green: The lamp is warming
up and shutting down.
Red: The lamp should be replaced.
• If the power is turned off and immedi-
ately switched on again, the lamp re-
placement indicator may take some
time to illuminate.
• When controlling the projector using
RS-232C commands from a com-
puter, wait for at least 30 seconds af-
ter the power has been turned on, and
then transmit the commands.
• The projector cannot be operated while
the warming up message is displayed.
• When “Anti-Theft” (see page 
48
) is set,
the keycode input box will appear. Enter
the keycode.
Note
• When entering the keycode, press the
buttons previously set on the projec-
tor or the remote control.
• For details about the Anti-Theft func-
tion, refer to “Anti-Theft (Setting the
Anti-Theft)” on page 
48
.
Power ON
button
INPUT buttons
AV MUTE button
Volume
buttons
Lamp
replacement
indicator
Power
indicator
INPUT
button
Volume
buttons
Power ON
button
Power OFF
button
Keycode input box
Warming up message
Basic Operation
-27
3
Press 
 , 
 or 
 on the
remote control to select the IN-
PUT mode.
• After pressing 
 once on the projector,
use 
 to select the desired input mode.
Note
• When no signal is received, “NO SIG-
NAL” will be displayed. When a signal
that the projector is not preset to re-
ceive is received, “NOT REG.” will be
displayed.
• The INPUT mode is not displayed
when “OSD Display” is set to “OFF”.
(See page 
44
.)
About the INPUT mode
4
Press 
 or 
 on the remote
control to adjust the volume.
Note
• Pressing 
 will lower the volume.
Pressing 
 will raise the volume.
• On the projector, the volume can be
adjusted by pressing 
 or 
.
5
Press 
 on the remote con-
trol to temporarily display a
black screen and turn off the
sound.
Note
• Pressing 
 again will turn the pro-
jected image and sound back on.
"On-screen Display (Example)
Using RGB
Using
Component
INPUT 1 mode
INPUT 3 mode
   Using Video
INPUT 2 mode
   Using S-Video
Used for projecting im-
ages from equipment that
sends RGB signals or
component signals con-
nected to the RGB input
terminal.
Used for projecting im-
ages from equipment
connected to the S-
VIDEO input terminal.
Used for projecting im-
ages  from equipment
connected to the VIDEO
input terminal.
INPUT 1
(RGB/
Component)
INPUT 2
(S-Video)
INPUT 3
(Video)
-28
Image Projection
-28
', ", \, |
buttons
MENU button
Power OFF
button
ENTER
button
“Language” menu icon
6
Press 
 on the projector or
 on the remote control, then
press that button again while the
confirmation message is dis-
played, to turn off the projector.
Note
• If you accidentally pressed 
 or
 and do not want to turn off the
power, wait until the confirmation
message disappears.
• The projector cannot be operated
while a message “Shutting down.
Please wait.” is displayed.
Info
• Do not unplug the power cord during
projection or cooling fan operation.
This can cause damage due to rise
in internal temperature, as the cool-
ing fan also stops.
Selecting the On-screen
Display Language
The on-screen display language of the projec-
tor can be set to English, German, Spanish,
Dutch, French, Italian, Swedish, Portuguese,
Chinese, Korean or Japanese. For operating the
menu screen, see pages 
32
 to 
35
.
1
Press 
 on the remote con-
trol.
• The “Picture” menu will be displayed.
2
Press \ or | to select the “Lan-
guage” menu icon.
• The “Language” menu will be displayed.
3
Press ' or " to select the de-
sired language, and then press
.
4
Press 
.
• The desired language will be set as the
on-screen display.
Basic Operation
-29
Keystone Correction
 (Correcting Trapezoidal Distortion)
Correcting Trapezoidal
Distortion
This function allows for Keystone (On-screen
Trapezoidal Distortion) Correction.
Note
• When the image is projected either from the
top or from the bottom towards the screen
at an angle, the image becomes distorted
trapezoidally.
The function for correcting trapezoidal dis-
tortion is called Keystone Correction.
• The Keystone Correction can be adjusted up
to an angle of approximately ±35 degrees
(when the picture display mode is set to
“NORMAL” (see page 
40
)).
1
Press 
.
• You can also use 
 on the projector.
2
Press '"\ and | to adjust
the Keystone correction.
• You can also adjust the Keystone cor-
rection using the 
 or 
 but-
tons on the projector.
Note
• Since the trapezoidal distortion of the
image can be corrected up to an angle
of approximately ±35 degrees (when
the picture display mode is set to
“NORMAL” (see page 
40
)), the actual
screen can be diagonally set up to
that angle as well.
• Press 
 to make the default set-
ting.
• Straight lines or the edges of images
may appear jagged while adjusting
the image.
3
Press 
.
• You can also use 
 on the projector.
Note
• You can use the same settings used
in NORMAL mode 4:3 for 16:9.
Compresses
upper side.
Compresses
lower side.
', ", \, |
buttons
KEYSTONE 
button
UNDO
button
Page of 14
Display

Sharp PG-A10S (serv.man27) User Manual / Operation Manual ▷ Download

  • DOWNLOAD Sharp PG-A10S (serv.man27) Service Manual ↓ Size: 967.41 KB | Pages: 14 in PDF or view online for FREE
  • Here you can View online or download the User Manual / Operation Manual for the Sharp PG-A10S (serv.man27) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp PG-A10S (serv.man27) Projector. Information contained in Sharp PG-A10S (serv.man27) User Manual / Operation Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.