Sharp MX-TM10 (serv.man11) Service Manual ▷ View online
4
4
4-5
4-5
Disassembly and assembly > Removing this Equipment
Disassembly and assembly > Removing this Equipment
11) Remove cable from 3 locations of the wire saddle and remove 1 connector.
x3
x1
F-4-12
12) Remove 1 connector and secure the cable to the cable guide.
x1
x1
F-4-13
13) Remove the cutter unit from the trimmer unit frame.
MEMO:
Hold the cutter unit at the
locations shown below.
F-4-14
4
4
4-6
4-6
Disassembly and assembly > Removing this Equipment
Disassembly and assembly > Removing this Equipment
14) Remove 2 screws.
x2
F-4-15
15) Remove the trimmer unit frame from the finisher.
MEMO:
Hold the trimmer unit frame at the
locations shown below.
F-4-16
F-4-17
4
4
4-7
4-7
Disassembly and assembly > List of Parts > Motors
Disassembly and assembly > List of Parts > Motors
List of Parts
Solenoids
SL102
SL101
No.
Part name
Reference
SL101
Stopper solenoid
4-19
SL102
Paddle solenoid
4-17
F-4-18
Motors
M101
M103
M102
M104
M106
M105
No.
Part name
Reference
M101
Feed motor
4-21
M102
Registration motor
4-20
M103
Front estrangement motor
4-22
M104
Rear estrangement motor
4-22
M105
Press motor
4-21
M106
Cutter motor
-
F-4-19
4
4
4-8
4-8
Disassembly and assembly > List of Parts > PCBs
Disassembly and assembly > List of Parts > PCBs
Sensors
S101
S106
S103
S104
S108
S102
S109
S105
No.
Part name
Reference
S101
Inlet sensor
-
S102
Front estrangement motor HP sensor
-
S103
Paper delivery sensor
-
S104
Rear estrangement motor HP sensor
-
S105
Registration HP sensor
-
S106
Press motor HP sensor
-
S108
Cutter motor clock sensor
-
S109
Waste paper box detection sensor
-
S011
Waste paper full sensor (light-emitting)
4-24
S011
Waste paper full sensor (light- receiving)
4-25
F-4-20
PCBs
PCB1
PCB2
PCB3
No.
Part name
Reference
PCB1
Trimmer controller PCB
4-27
F-4-21
Click on the first or last page to see other MX-TM10 (serv.man11) service manuals if exist.