Sharp MX-RP19 Service Manual ▷ View online
MX-RP19 N DISASSEMBLY AND ASSEMBLY 5 – 1
MX-RP19 N
Service Manual
[5] DISASSEMBLY AND ASSEMBLY
1. RSPF unit
1) Open the paper feed unit. Disengage the pawls (3 positions) of
the front cabinet by inserting a minus screwdriver under the
base tray. Then, remove the front cabinet and the rear cabinet.
base tray. Then, remove the front cabinet and the rear cabinet.
2)
Open the paper feed unit. Remove the harness from the wire
saddle, and disconnect the connector. Remove the screw, and
remove the grounding wire. Remove the screw, and remove
the holder. Remove the document tray.
saddle, and disconnect the connector. Remove the screw, and
remove the grounding wire. Remove the screw, and remove
the holder. Remove the document tray.
No.
Name
1
Document pickup roller
2
Paper feed roller
3
Separation roller
4
Torque limiter SPF
5
Take-up torque limiter
6
Discharge brush
7
Registration roller
8
OC mat
MX-RP19 N DISASSEMBLY AND ASSEMBLY 5 – 2
A. Paper feed unit
1) Open the paper feed unit and remove it.
2)
Disconnect the connector, and remove the snap band.
Remove the earth wire.
Remove the earth wire.
3)
Remove the link arm return spring, and remove the paper feed
PG holder.
PG holder.
4)
Remove the transport unit.
MX-RP19 N DISASSEMBLY AND ASSEMBLY 5 – 3
5) Remove the paper feed upper paper guide unit, and remove
the upper cover.
B. Pick up roller, Paper feed roller, Take-up
torque limiter
1) Remove the upper transport support paper guide.
2)
Remove the Holder guide, and remove the pick up roller and
the paper feed roller.
the paper feed roller.
3)
Remove the one-way coupling, the belt, and the pulley.
Remove the E-ring. Pull out the shaft, and remove the bearing,
the holder, and the take-up torque limiter.
Remove the E-ring. Pull out the shaft, and remove the bearing,
the holder, and the take-up torque limiter.
C. Separation roller, SPF torque limiter
1)
Open the paper feed unit, and remove the cover.
MX-RP19 N DISASSEMBLY AND ASSEMBLY 5 – 4
2) Remove the holder, and remove the separation roller.
3) Remove the SPF torque limiter.
D. Discharge brush
1) Remove the discharge brush.
E. Registration roller
1)
Clean the registration roller.
F. OC mat
1)
Open the RSPF unit, and clean the OC mat.
G. Transport roller 2, Transport roller 3, Paper exit
roller
1)
Clean the transport roller 2, the transport roller 3, and the
paper exit roller.
paper exit roller.
H. Reading plate
1)
Clean the reading plater.
Click on the first or last page to see other MX-RP19 service manuals if exist.