Sharp MX-RBX1 (serv.man20) Service Manual / Technical Bulletin ▷ View online
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-276
1.Model Name:
MX-RBX1
2.Symptom:
When AR-RBX1 (Intermediate Unit) is installed in MX-3501N/4501N, the paper may
occasionally be stopped at the entrance flapper and cause Jam (POD1_S). In the case of
the installation of AR-RBX1 in MX2300N/2700N, there will be no problem.
occasionally be stopped at the entrance flapper and cause Jam (POD1_S). In the case of
the installation of AR-RBX1 in MX2300N/2700N, there will be no problem.
3.Changes:
To prevent Jam (POD1_S) caused by the paper stopped at the entrance flapper, the
adjustment position of flapper solenoid has been changed and the flapper opening has
been increased. In the case of the installation of unmodified Intermediate Unit in MX-
3501N/4501N, implement the following adjustment before installation.
been increased. In the case of the installation of unmodified Intermediate Unit in MX-
3501N/4501N, implement the following adjustment before installation.
Note: In the case of modified product, a red circle-marking label is applied to the version
frame side of the bottom of Intermediate Unit.
JAM (POD1_S) CAUSED BY PAPER STOPPED AT THE
ENTRANCE OF INTERMEDIATE UNIT (AR-RBX1) FLAPPER
TECHNICAL BULLETIN
Date:
31
st
January 2006
Model:
MX-RBX1
Ref.:
001
Colour:
Yellow
Page:
1 of 2
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-276
4.Effective Date:
From February 2006 production
Display