Sharp MX-RB11 Service Manual ▷ View online
MX-RB11 EXTERNAL VIEW AND INTERNAL STRUCTURE 2 – 3
3. Roller
No.
Name
Function/Operation
1
Paper exit roller (Idle)
Transmits the transport power of the paper exit roller to paper.
2
Paper exit front roller (Idle)
Transmits the transport power of the paper exit front roller to paper.
3
Inlet port rear roller shaft (Idle)
Transmits the transport power of the inlet port rear roller to paper.
4
Inlet port roller (Idle)
Transmits the transport power of the bundle exit inlet port roller to paper.
5
Paper exit roller (Drive)
Transports paper.
6
Paper exit front roller (Drive)
Transports paper.
7
Inlet port rear roller (Drive)
Transports paper.
8
Inlet port roller (Drive)
Transports paper.
4
3
2
1
8
7
6
5
MX-RB11 MAINTENANCE 3 – 1
MX-RB11
Service Manual
[3] MAINTENANCE
1. Maintenance list
✕: Check (Clean, replace, or adjust according to necessity.) {: Clean S: Replace U: Adjust ✩: Lubricate
*1: The each rollers and the each transport paper guides should be cleaned with alcohol at every 100K.
MEMO:
Cleaning of the paper feed and paper transport system sensors and detectors
Cleaning of the paper feed and paper transport system sensors and detectors is not always necessary for every maintenance. In the following
case, check and clean.
• A trouble or jam is generated because of the sensors or detectors. (Check the jam history.)
Cleaning of the paper feed and paper transport system sensors and detectors
Cleaning of the paper feed and paper transport system sensors and detectors is not always necessary for every maintenance. In the following
case, check and clean.
• A trouble or jam is generated because of the sensors or detectors. (Check the jam history.)
MEMO:
Note for alcohol used for cleaning
Use ethanol alcohol for cleaning.
Note for alcohol used for cleaning
Use ethanol alcohol for cleaning.
Parts work
sequence
Part name
When
calling
When machine
maintenance
Remarks
1
Inlet port roller (Drive)
{
{
*1
2
Inlet port rear roller (Drive)
{
{
*1
3
Paper exit front roller (Drive)
{
{
*1
4
Paper exit roller (Drive)
{
{
*1
5
Sensors
✕
✕
-
Paper guides
✕
{
*1
4
1
3
5
5
5
2
MX-RB11 MAINTENANCE 3 – 2
2. Each unit disassembly
A. Paper pass unit
1)
Pull out the paper pass unit, and remove the screw. Free the
lock, to remove the paper pass unit.
lock, to remove the paper pass unit.
NOTE: If the upper guide unit is removed, the adjustment is
required at the installation.
When installing, adjust so that the solenoid fits with the bracket
adjustment reference.
If the upper guide unit magnet lifts up, adjust the bracket so that the
magnet does not lift up.
adjustment reference.
If the upper guide unit magnet lifts up, adjust the bracket so that the
magnet does not lift up.
No.
Name
1
Paper pass unit
1
3
2
1
1
2
3
4
5
3
4
Adjustment
reference
±0.5
reference
±0.5
MX-RB11 MAINTENANCE 3 – 3
3. Disassembly and assembly of each
unit
A. Inlet port roller (Drive), inlet port rear roller
(Drive), paper exit front roller (Drive), paper
exit roller (Drive)
exit roller (Drive)
1)
Remove the paper pass unit.
2)
Open the upper guide unit, and clean the inlet port roller
(Drive), inlet port rear roller (Drive), paper exit front roller
(Drive), and the paper exit roller (Drive).
(Drive), inlet port rear roller (Drive), paper exit front roller
(Drive), and the paper exit roller (Drive).
NOTE: If the interface reverse path solenoid is removed, the
adjustment is required at the installation.
Slide the flapper toward the left side with the solenoid plunger
pushed in, until the position in which width becomes maximum.
Install the interface reverse path solenoid.
pushed in, until the position in which width becomes maximum.
Install the interface reverse path solenoid.
No.
Name
1
Inlet port roller (Drive)
2
Inlet port rear roller (Drive)
3
Paper exit front roller (Drive)
4
Paper exit roller (Drive)
4
1
3
2
Click on the first or last page to see other MX-RB11 service manuals if exist.