Sharp MX-PEX1 (serv.man14) User Manual / Operation Manual ▷ View online
C
OLOR
W
ISE
P
RINT
O
PTIONS
85
4 Choose ColorWise from the drop-down list.
The ColorWise pane appears.
5 Select Two-Way Communication.
For information about enabling Two Way Communication, see
Printing from Mac OS
.
6 Specify the settings for the print options in the ColorWise pane.
For information about ColorWise print options, see
page 71
.
7 Click Expert Settings in the Print Mode pane.
The ColorWise Expert Settings dialog box appears.
C
OLOR
W
ISE
P
RINT
O
PTIONS
86
8 Choose settings for the main ColorWise print options.
For information about ColorWise print options, see
page 71
.
To set Output Profile to Use Media Defined Profile, you must disable Two-Way
Communication. The selection then appears in the drop-down list.
Communication. The selection then appears in the drop-down list.
9 Click OK.
The ColorWise pane reappears.
10 Click Print.
Using Expert Color Settings to enable Device Link Profiles
When you print a job, you can enable Device Link Profiles by using the Fiery X3eTY2 printer
driver if you have two-way communication enabled. After you enable a Device Link Profile,
you can see the Device Link Profile in use in Expert Color.
driver if you have two-way communication enabled. After you enable a Device Link Profile,
you can see the Device Link Profile in use in Expert Color.
N
OTE
:
If you do not have Two-Way Communication enabled, and you select an RGB Source
Profile and Output Profile that corresponds to a Device Link Profile, the Device Link Profile
is activated, although you do not see the Device Link Profile in use in Expert Color.
is activated, although you do not see the Device Link Profile in use in Expert Color.
For information about installing and assigning Device Link Profiles, see
page 27
.
N
OTE
:
The procedures for enabling Device Link Profiles using Expert Color Settings for
Windows and Mac OS X are similar. The following illustrations use Windows screens.
Any differences are noted.
Any differences are noted.
T
O
USE
THE
F
IERY
X3
E
TY2
PRINTER
DRIVER
TO
ENABLE
D
EVICE
L
INK
P
ROFILES
1 Enable Two-Way Communication.
For more information about enabling Two-Way Communication, see
Printing from Windows
or
Printing from Mac OS
.
2 From your application, select Print.
3 Select Fiery X3eTY2 as your printer and click Properties.
4 Click the Color icon.
5 Click Expert Settings.
C
OLOR
W
ISE
P
RINT
O
PTIONS
87
6 Select the Source Profile and the Output Profile.
After you select a Source Profile and Output Profile source combination that is defined in a
Device Link Profile, the Device Link Profile is automatically enabled.
Device Link Profile, the Device Link Profile is automatically enabled.
When the Device Link Profile is selected, the Color Process workflow updates and some
options may not appear. The message “Device Link Profile in use” appears under the RGB
Source Profile or CMYK Simulation Profile.
options may not appear. The message “Device Link Profile in use” appears under the RGB
Source Profile or CMYK Simulation Profile.
7 Click OK to exit Expert Color Settings.
8 Click OK to close the Properties window, and then click OK to send your job.
1
Device Link Profile in use
1
C
OLOR
M
EASUREMENT
I
NSTRUMENTS
88
C
OLOR
M
EASUREMENT
I
NSTRUMENTS
This chapter explains how to set up and calibrate the following color measurement
instruments, available as separately purchased options:
instruments, available as separately purchased options:
• DTP32 densitometer
• DTP32 Series II densitometer
• DTP41 spectrophotometer
• ED-100 densitometer
• ES-1000 hand-held spectrophotometer
Using the DTP32
ColorWise Pro Tools is designed to work with the DTP32 densitometer, which feeds color
measurements to the Fiery X3eTY2 automatically.
measurements to the Fiery X3eTY2 automatically.
N
OTE
:
You can input measurements from other densitometers using a simple ASCII file
format (see
“Importing Density Measurements”
on page 98).
Setting up the DTP32
Before you calibrate the Fiery X3eTY2 using the DTP32, you must connect, configure, and
calibrate the DTP32 to prepare for measuring the printed patches (see
calibrate the DTP32 to prepare for measuring the printed patches (see
“Calibrating the
DTP32”
on page 90). For additional information about setting up and using the DTP32,
see the documentation that accompanies the DTP32.
Click on the first or last page to see other MX-PEX1 (serv.man14) service manuals if exist.