Sharp MX-PB12 (serv.man5) Service Manual / Technical Bulletin ▷ View online
1/2
ROM version upgrade ... (1)
1. Model Name
MX-M260/M310, MX-PB12, AR-FX7
2. Description
MCU, PCL and FAX-ROM version upgrade
Executed from the production in December 2009
Target model
Packing control No.
MCU
IMC
OPE
PCL
FAX
MX-M260 Series
A01
V02.00
V05.00 V01.00 V01.06 V04.01
MX-M310 Series
A01
V02.00
V01.00 V01.00 V01.06 V04.01
Note: Version upgrade of FAX (AR-FX7) has been executed from January 2010 for Europe and from December 2009 for other
regions.
Changes: Refer to the attached sheet.
Sharp Electronics (UK) Ltd., Document Systems Support
TECHNICAL BULLETIN
Date:
19
th
March 2010
Model:
See Below
Ref.:
DCE788
Colour:
White
Page:
1 of 2
2/2
3. Changes
No. Item
Description
1
UI relation
If the screen is switched when the delivery tray is full, the delivery tray full indicator flashes.
This problem is fixed.
This problem is fixed.
2
Copy relation
If toner end occurs when performing staple sort copying, a message prompting removal of
the paper in the staple compiler appears after replacing toner, and staple job is not
resumed. This problem is fixed.
the paper in the staple compiler appears after replacing toner, and staple job is not
resumed. This problem is fixed.
3
Printer relation
If paper runs out during printing with sheets stapled and it is left in that state for a long time,
printing is not resumed even if paper is loaded. This problem is fixed.
printing is not resumed even if paper is loaded. This problem is fixed.
4
List print relation
If the FAX setting list is printed when the delivery tray is full, a message prompting removal
of the delivered paper appears, and hang-up occurs. This problem is fixed.
of the delivered paper appears, and hang-up occurs. This problem is fixed.
5
E-mail alert relation
If "F1-15" trouble occurs when setting the E-mail alert, the E-mail alert is sent; however the
trouble code is not listed in the text. This problem is fixed.
trouble code is not listed in the text. This problem is fixed.
6
Simulation relation
A check item for the sensor (FPLS) of the inner finisher added as a countermeasure against
jam during stapling has been added to SIM3-21.
jam during stapling has been added to SIM3-21.
7
Soft SW relation
A change has been made so that the display timing of the message appearing when the
drum and developer reach the life cycle can be selected by the soft SW.
Sim55-1 Soft SW 4-6
0: The life is determined by the counter or running distance.
(Conventional display: Default)
1: The life is determined by the counter only.
drum and developer reach the life cycle can be selected by the soft SW.
Sim55-1 Soft SW 4-6
0: The life is determined by the counter or running distance.
(Conventional display: Default)
1: The life is determined by the counter only.
8
Others
Flash ROM made by MACRONIX can be used.
Sharp Electronics (UK) Ltd., Document Systems Support
Display