DOWNLOAD Sharp MX-NB10 (serv.man6) Service Manual ↓ Size: 1016.94 KB | Pages: 15 in PDF or view online for FREE

MX-NB10

SPECIFICATIONS

1 – 4

When [Color Mode] key the machine is pressed, the following window is displayed.

Function

Item

Remarks

Network scanner 

Scan to E-mail 

Scan to Desktop

Scan to FTP server

Destination

Specify e-mail address with LDAP

AdHoc (Enter e-mail address from MFP.)

File format

JPEG
PDF (non-compression, G3

 *

, G4

 *

, JPEG)

TIFF (non-compression, G3

 *

, G4

 *

, JPEG)

TIFF/PDF multiple page support

*: B/W only

Key name

Classification

Display item

Remark

Color mode key Color mode

*Color

Gray
B/W

The scan color is set.

*Default is Color.

Format key

Format & compression type

TIFF

TIFF G3

*PDF

PDF G3

PDF G4

JPEG

The file format is specified.

*Default is PDF.

Multi file/ Single file

Single 1 page

3 1 file

*Multi all pages

3 1 file

Multi 2 pages

3 1 file

Multi 3 pages

3 1 file

Multi 4 pages

3 1 file

Multi 5 pages

3 1 file

Multi 6 pages

3 1 file

Single: 1 page is made into 1 file. 

Multi: 2 or more pages are made into 1 file.

*Default is "Multi all pages a 1 file."

Resolution key

Resolution

75dpi

100dpi

*150dpi

200dpi

300dpi

400dpi
600dpi

The output resolution is set. 

*Default: 150dpi

Duplex key

Single document/
Duplex document

*1-SIDED

2-SIDED 

Setting of single or duplex.
Duplex setting is displayed only when the
RSPF is installed.
When "Duplex" is set, the document is
scanned only from the RSPF.

*Default is "1-SIDED"

Vertical bind document (Vertical set)

Horizontal bind document (Vertical set)
Vertical bind document (Horizontal set)

Horizontal bind document (Horizontal set)

Vertical bind document (Vertical set)

Horizontal bind document (Vertical set)
Vertical bind document (Horizontal set)

Horizontal bind document (Horizontal set)

Selection of the following four
(only when "Duplex document" is set.)

•  Vertical bind document (Vertical set)

•  Horizontal bind document (Vertical set)
•  Vertical bind document (Horizontal set)

• Horizontal bind document (Horizontal

set)

Document size
key

Scan size

A3/B4/A4/A4R/B5/B5R/A5/A5R
11 x 17/8.5 x 14/8.5 x 11/

8.5 x 11R/5.5 x 8.5/5.5 x 8.5R

Setting of the scan size.
The scan size is set with the document size
detection, and can be manually changed.
When the document size cannot be detected
or when there is no size input, sending can-
not be made. The display is made sequen-
tially from the largest to the smallest, from the
top to the bottom, each in the AB series and
the inch series.

MX-NB10

SPECIFICATIONS

1 – 5

Sender name: Use MFP product name.

Date & Time: Date and time at which file is sent

Session page counter: Image send counter

Unique identifier: Automatically created based on the information of the

date and time and image send counter.

Example: MX-M200D_20000620_155114_0057_06a3f3393948.pdf

Can be freely set.

Default: Scanned image. device name: MX-XXX (MFP product name)

Example: Scanned image. device name: MX-XXX

The following messages are added to the image send mail.

Device name: Freely set

Model: MFP product name

Location: Freely set

File type: File type of send image

Resolution: Resolution of send image

Example: Device name: MX-XXX

Model name: MX-XXX

Location: D2) Planning dept.

File type: PDF MMR (G4)

Resolution:200 dpi x 200 dpi

• The mail address registered for each destination can be selected

from the mail address which is searched using LDAP.

•  The information for each recipient includes the recipient name, IP address

or mail address, scanning size, format type, and scan parameter.

• The scanning size is the size of the document sensed or predeter-

mined by the main unit(copier). 

• If there is no information available about the document size from the

main unit(copier), scanning is performed according to the scanning
size predetermined in the destination registration section in advance.
However, a detected or predetermined document size takes prece-
dence over the information predetermined.

• This unit should be connected to the USB port (USB-2) on the dual

function board of the main unit(copier).

Network setups should be performed by the system administrator. Use
a setup tool such as TCP/IP, Netware, Ether Talk or Web interface.

The network expansion kit can be installed by setting up NIC, installing
a printer driver with the total installer, and installing Sharpdesk. 

The network expansion kit printer is connected only through the net-
work. The port setup required for installing a printer driver is the network
only. The following items should be set up.

1) Search for the network expansion kit on the network and select the

network expansion kit you want or enter the IP address of the appli-
cable network expansion kit to create a TCP/IP port.

2) Install the driver to the created port.

When the setup of the above client PC is completed and the printer is
set to "Windows shared printer," other client PCs can select this
printer shared port and then proceed to installation of the driver.

1) Requirements for connecting network expansion kit

•  Dual function board mounted model is recommended

•  Dual function board is surely required for network scanning

2) Connection to the main unit(copier)

•  When Dual function board is used, connects with USB2.0 port of a

main unit(copier).

3) Power supply

Supplied by the main unit

MX-NB10

UPDATING NETWORK BOX FIRMWARE

3 – 1

Update the Network Box firmware in the following procedure using a
Web browser.

1.

Display the web page for updating Network Box firmware

Start the browser on your PC and specify the following URL. A web

page, as shown in “Fig.1”, appears on screen.

http://<IP Address of Network Box>/firmware_upload.html

Fig.1: [Web page for updating Network Box firmware]

2.

Switch to firmware upload mode

Click the button on the screen, the message shown in “Fig.2”

appears.

Fig.2: [Switch to firmware upload mode]

The page changes to the Network Box firmware upload mode.

The browser is automatically reloaded and then the screen looks
like this.

*When the screen shown in “Fig.3” is not displayed, refresh a

browser manually.

Fig.3: [Upload mode]

3. Specifying the file

Click the Reference button. Selects the firmware of the Network
Box version you want to update, from the file selection menu indi-

cated in “Fig.4”.

Fig.4: [Specifying the file]

 

UPDATING NETWORK BOX FIRMWARE

3 – 2

4.

Updating the firmware

After you select the file, click the Submit button. The firmware is
transmitted to Network Box, and it is updated.  The message indi-

cated in “Fig.5” blinks repeatedly until the updating process is com-

pleted. Do not turn off the power supply.

Fig.5: [Updating in progress]

5.

Restarting your PC

When updating is completed, the message shown in “Fig.6”

appears on screen.  Turn off the power and then turn it on again to

restart Network Box.

Fig.6: [Updating completed]

Note: Both the Boot and Main files can be updated in the same proce-

dure as mentioned above.  However, when you want to update

both at the same time, you need to update them separately by
repeating the same procedure twice.

Caution: If a DHCP is used, the browser may not be able to reload auto-

matically in some cases when transferring to the upload mode

because different IP addresses are read.  Therefore, we rec-

ommend that you use a fixed IP address when updating firm-
ware.

If the upload mode is operating with different IP addresses,

check the IP address obtained by the Ethernet address of Net-

work Box from the DHCP server and display the updating
mode URL again using the browser.

When a proxy server is used, the screen may not be updated

by reloading.  In that case, you need to update manually.