Sharp MX-MF11 (serv.man3) Service Manual ▷ View online
MX-7040N MX-MF11 (MULTI BYPASS TRAY) 9 – 1
MX-7040N
Service Manual
[9] MX-MF11 (MULTI BYPASS TRAY)
1. Unpacking
A. Packed items check
2. Installation
NOTE: Before installation, be sure to turn both the operation and
main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
A. Removal of the covers
NOTE: When removing the cabinet, insert a screwdriver (-) into the
circled sections in the figure below and remove.
1)
Remove the multi bypass tray paper transportation cover.
2)
Remove the multi bypass tray covers.
B. Installation of the multi bypass tray for LCT
1)
Fasten the connection pins.
No.
Name
Quantity
1
Tab sheet restraint plate
1
2
Rear edge restraint plate
1
3
Bracket
1
4
Connection pin
2
5
Screws
3
MX-7040N MX-MF11 (MULTI BYPASS TRAY) 9 – 2
2)
Fix the bracket with the screw.
3)
Remove the multi bypass tray from the package.
NOTE: Use man power of two persons to lift the multi bypass
tray. (Refer to the figure below.)
C. Removal of the upper cabinet of the multi
bypass tray for LCT
1)
Remove the screws and remove the upper cabinet.
MEMO: Remove the paper feed section with shifting it to the
direction of the arrow.
MEMO: Remove the paper feed section with shifting it to the
direction of the arrow.
2)
Mount the multi bypass tray on LCT and fix it with screws.
NOTE: Insert the connection pin to the positioning hole of the
multi bypass tray.
3)
Connect the harnesses to LCT.
MEMO: Wire the harnesses through the cable clamp.
MEMO: Wire the harnesses through the cable clamp.
Screw hole
Screw hole
Connection pin
Connection pin
MX-7040N MX-MF11 (MULTI BYPASS TRAY) 9 – 3
4)
Fix the upper cabinet with the screws.
MEMO: After fixing the cabinet, shift the paper feed section to
the direction of the arrow.
MEMO: After fixing the cabinet, shift the paper feed section to
the direction of the arrow.
5)
Open the front door of the LCT, and store the tab sheet
restraint plate to the place as shown in the figure below.
restraint plate to the place as shown in the figure below.
Display