DOWNLOAD Sharp MX-MF11 (serv.man2) Service Manual ↓ Size: 43.31 MB | Pages: 127 in PDF or view online for FREE

MX-7040N  CONFIGURATION  1 – 3

: Necessary option
: Necessary option (Use any one of them)

*1: Excluding consumable parts.

Install 
model

MX-FN19
MX-FN20
MX-FN21
MX-FN22
MX-TM10
MX-FD10
MX-CF11
MX-RB13
MX-MF11
MX-LC13
MX-PN12
MX-PN13

Main unit

222kg

*1

MX-FN19

42kg

MX-FN20

72kg

MX-FN21

61kg

MX-FN22

108kg

MX-TM10

32kg

MX-FD10

66kg

MX-RB12

5.7kg

MX-RB13

14.5kg

MX-RB14

27.5kg

MX-RB15

16.4kg

MX-CF11

23kg

MX-LC12

28.5kg

MX-LC13

130.3kg

MX-MF11

21kg

٤
٤
٤

٤

٤

٤

٤

٤

٤

٤

٤

ٌ

٤

ٌ

٤

٤

٤

٤

٤

٤

ٌ

ٌ

٤

ٌ

ٌ

٤

٤

٤

ٌ

MX-7040N  MX-6240N/7040N (MAIN UNIT)  2 – 1

MX-7040N

Service Manual

 

1

Waste toner bottle

1

2

Height adjuster plate

4

3

Operation panel

1

4

Operation panel mounting plate

1

5

Operation section cover A

1

6

Operation section cover B

1

7

Wire saddle (S)

2

8

Wire saddle (M)

1

9

Line cable

1

10

Screw (M3 x 8 S-tight)

3

11

Screw (M4 x 8 S-tight)

7

12

Clamp

1

13

Operation Manual

1

1

3

5

6

2

4

8

9

10

12

7

11

13

MX-7040N  MX-6240N/7040N (MAIN UNIT)  2 – 2

1) Put the height adjuster plate (Packed items) under the adjuster

bolt at the bottom of the machine. 

Turn  the adjuster bolt to adjust  the  height  and the tilt of the

machine.

MEMO: When the adjuster bolt is turned counterclockwise, the

height  is decreased. When turne d  clockwise,  the  height  is

increased.  (Common  to the options  the  height  of which is

adjusted by the adjuster bolt.)

Lower the height of the MX-CF11 to the lowest position

before adjusts the level between the MX-CF11 and the

main body.
Adjust the height of the top surface of main body refer-

ence to the top surface of the MX-CF11.

1) Pull out the  tray1/2. Remove the screw, and remove the cau-

tion label. 

Close the tray which was pulled out.

2) Pull  out  the  tray  3  and  tray 4 .  Turn  the  fixing ma terial  and

remove it. Remove the caution label. 

Attach the removed fixing material to the position shown in the

figure for future use. 

Close the tray which was pulled out.

Low

High

MX-7040N  MX-6240N/7040N (MAIN UNIT)  2 – 3

1)

Remove the optical unit fixing screw, and remove the note
label.

1)

Attach the operation panel mounting plate (Packed items) to
the operation panel (Packed items), and fix by the screw (M4 x
8 S-tight) (Packed items). Attach the operation section cover B
(Packed items), and fix by the screw (M3 x 8 S-tight) (Packed
items).

2)

Open the right door.

3)

Remove the screw and remove the upper cabinet front right.
Disconnect the connector from the USB I/F PWB.

4)

Remove the screws and remove the front cabinet upper.

5)

Attach the operation panel by fixing the screws (M4 x 8 S-tight)
(Packed items).

6)

Attach the wire saddle (S) and wire saddle (M), and fix the har-
ness to the wire saddle.

NOTE: Check to confirm that the harness does not enter the

panel. 
For the reference, refer to the figure below.