DOWNLOAD Sharp MX-MF11 (serv.man2) Service Manual ↓ Size: 43.31 MB | Pages: 127 in PDF or view online for FREE

MX-7040N  Transit, Installation (using) environment, Note   - ii

Operational environment
Temperature: 10 to 35C
Humidity: 20 to 85% RH
Atmospheric pressure: 590 to 1013hPa (altitude: 0 to 2000 m)

If  dust  enters  the machine, it  may  cause dirty copy and a p aper

jam, resulting in a shortened lifetime.

If the machine is installed under the rays of the sun, the exterior of

the machine may be discolored and abn ormal copies may be pro-

duced.

Do not install the machine at a place where there are gases and

chemicals. Especially be careful to avoid installation near a diazo-

type copier, which produces ammonium gas.
Copy  quality  may be  adversely  affected  and  a t rouble  may be

caused.
* There was a trouble in a place where silicon-series gas or volatile

components are generated. Use great care for avoiding this.

Avoid installation near a machine which produces vibrations.
If vibrations are applied to the copier machine, copy images may be

deflected and a trouble may be caused.

When  handling  the  PWB  and the electronic p arts,  be sur e  to

observe the following precautions in order to prevent against dam-

age by static electricity.
• When in transit or storing, put the parts in an anti-static bag or an

anti-static case and do not touch them with bare hands.

• When and after removing the parts from an anti-static bag (case),

use an earth band as shown below:
• Put an earth band to your arm, and connect it to the machine.

85%

Humidity㧔RH㧕

60%

20%

MX-7040N  Transit, Installation (using) environment, Note   - iii

• When  repairing  or  replacing an   electronic  part,  perform  the

procedure on an anti-static mat.

When  handling  the  OPC  drum,  developing  and transfer unit s,

observe the following items.
Drum unit
• To prevent  damage to the OPC drum, avoid working on the drum

unit in high intensity light areas.

• When the OPC drum is removed from the machine, cover it with

light blocking material. (When using paper, use about 10 sheets

of paper to cover it.)

• Be careful not to attach fingerprints, oil, grease, or other foreign

material on the OPC drum surface.

Transfer unit
• Be careful not to "leave” fingerprints, oil, grease, or other foreign

material on the transfer roller, primary transfer belt and  second-

ary transfer belt.

Developing unit
• Be careful not to "leave” fingerprints, oil, grease, or other foreign

material on the developing unit.

Fusing unit
• Be careful not to "leave” fingerprints, oil, grease, or other foreign

material on the fusing roller and the external heating belt.

• Do not leave the fusing roller in contact state for a long time.
If  these  items are ne glected,  a tr ouble  may be   generated  in the

copy and print image quality.

It is recommendable to use a forklift for bringing in the machine for

safety.
If no forklift is available, man-power of two persons is required. The

machine is considerably heavy, and requires safety precautions for

delivery and installation.
Transit  of the  machine  must be made  in  packed  condition  to the

installing place.
Since the hard disk drive is built in the machine, use car e not to

exert vibrations or shocks to the machine when in transit.

Remove the packing materials prior to installation in the office envi-

ronment.

1

Implements, facility, 

and man power

Use a forklift. (If no forklift is available, 

manpower of two persons is required.) 

2

Delivery

Transit must be made in packed condition.

MX-7040N  Transit, Installation (using) environment, Note   - iv

NOTE:
• Prepare an indoor wiring (power outlet) which is connected to the AC plug of the machine and its option units. 

The required number of power outlets varies according to the combination of the option units. 

Prepare the necessary number of them.
Example: (North America) Finisher "2.9A", large-capacity multi-stage tray "8A"   12A>10.9A=2.9A+8A   Connectable to the same circuit 

(breaker).

• For the AC cord of an option unit, use another indoor wiring (another breaker) than that for the machine.
For North America only
• The machine power is of 200V, an indoor wiring work may be required.
For Europe only
• Both of AC code 1 and 2 can be connected together into 16A AC outlet in case, but if the pow er source is less than 16A in case, notice the

following rules.

• Use different outlet which has separate breaker for each of the two AC cords of the machine.
• For additional installation of breakers and 200V indoor wiring, may be required certified jobs.

North 

America

62cpm 

machine

70cpm 

machine

Power supply 

rating

120V/2.9A

AC power 

is supplied 

from the 

finisher.

Power is 

supplied 

from the 

machine.

Power is 

supplied 

from the 

machine.

208-240V/12A

---

Power is 

supplied from 

the large-

capacity multi-

stage tray.

120V/8A

Power capacity

120V/15A

---

---

---

240V/20A

---

---

120V/15A

Form of the 

plug

---

---

---

---

---

Form of the 

power outlet

---

---

---

---

---

Europe/

UK

62cpm 

machine

70cpm 

machine

Power supply 

rating

230V/1.5A

AC power 

is supplied 

from the 

finisher.

Power is 

supplied 

from the 

machine.

Power is 

supplied 

from the 

machine.

230V/8A

230V/8A

Power is 

supplied from 

the large-

capacity multi-

stage tray.

230V/4A

Power capacity

230V/10A

---

---

---

230V/15A

230V/15A

---

230V/10A

Form of the 

plug

---

---

---

---

Form of the 

power outlet

---

---

---

---

Machine

Paper feed system

After-process system

AC power
supply

4K
finisher
(100-sheets
binding)

Multi-
folding
unit

Inserter

Decurler
unit

Large-capacity
multi-stage tray

Paper
pass
unit

MX-7040N  CONFIGURATION  1 – 1

MX-7040N

Service Manual

 

MX-7040N

MX-6240N

DIGITAL FULL COLOR
MULTIFUNCTIONAL SYSTEM

MX-LC12

LARGE CAPACITY
TRAY

MX-MF10

MULTI BYPASS TRAY

MX-TR14

EXIT TRAY UNIT

MX-LCX3N

LARGE CAPACITY
TRAY

MX-MF11

MULTI BYPASS TRAY

MX-RB14

PAPER PASS
UNIT

MX-RB15

CURL CORRECTION
UNIT

MX-FD10

FOLDING UNIT

MX-CF11

INSERTER

MX-RB12

PAPER PASS
UNIT

MX-TU14

EXIT TRAY CABINET

MX-PN12A/B/C/D

PUNCH MODULE

MX-PN13
A/B/C/D

PUNCH MODULE

MX-FN20

SADDLE STTICH
FINISHER

MX-FN19

FINISHER

MX-FN22

SADDLE STTICH
FINISHER

MX-FN21

FINISHER

MX-TM10

TRIMMING
MODULE

MX-LC13

LARGE CAPACITY
TRAYS

MX-RB13

RELAY UNIT

MX-US50

SHARPDESK 50 LICENSE
KIT

MX-USA0

SHARPDESK 100 LICENSE
KIT

MX-UN50A

Sharp OSA Network Scanner
Tool 50 License Kit

MX-UN1HA

Sharp OSA Network Scanner
Tool 100 License Kit

MX-AMX1

APPLICATION
INTEGRATION MODULE

MX-AMX2

APPLICATION
COMMUNICATION MODULE

MX-AMX3

EXTERNAL ACCOUNT
MODULE

MX-FWX1

INTERNET FAX EXPANSION
KIT

MX-PUX1

XPS EXPANSION KIT

MX-PF10

BARCODE FONT KIT

MX-FX11

FACSIMILE EXPANSION KIT

AR-SU1

STAMP UNIT

MX-EB11

ENHANCED COMPRESSION
KIT

MX-UN10A

Sharp OSA Network Scanner
Tool 10 License Kit

MX-UN01A

Sharp OSA Network Scanner
Tool 1 License Kit

MX-UN05A

Sharp OSA Network Scanner
Tool 5 License Kit

AR-SV1

STAMP CARTRIDGE

MX-SCX1

STAPLE CARTRIDGE

MX-SCX2

STAPLE CARTRIDGE

MX-AM10

WEB BROWSING EXPANSION
KIT

MX-KB13

KEYBOARD

MX-US10

SHARPDESK 10 LICENSE
KIT

MX-USX1

SHARPDESK 1 LICENSE KIT

MX-USX5

SHARPDESK 5 LICENSE KIT

MX-EC50

CARD SOLUTION KIT

MX-EB15

MIRRORING KIT

MX-FR36U

DATA SECURITY KIT

MX-FR36

DATA SECURITY KIT

AR-SC3

STAPLE CARTRIDGE

AR-SC2

STAPLE CARTRIDGE

(For 50 sheets binding)

(For 100 sheets binding)