Sharp MX-M950 / MX-MM1100 (serv.man83) Service Manual / Technical Bulletin ▷ View online
Sharp Electronics (UK) Ltd., Technical Services Group
1. Model Name: MX-M850/M950/M1100
2. Description: Upgrade of ICU-ROM and e-instruction manual (Except for Taiwan)
From mid-July 2009 production
Destinati
on
ROM
control
No.
ICU PCU SCU DSPF
IMAG
E
DATA
OPU
P-
CON
E-
Manual
Except for
China/Tai
wan
F00
0205
H0
0110
H0
0100
H0
0100
H0
0100
H0
0100
H0
0100
H0
0160H
0
For China
E00
C205
H0
C110H
0
* The version of the above ICU-ROM is the version written in the ROM
control label, so make sure that the actual version of this ROM is any of
the following (Sim22-5):
the following (Sim22-5):
- Except for China/Taiwan
ICU(MAIN):02.05.H0/ICU(BOOT):01.01.H0/LANGUAGE:01.10.H0/GRA
PHIC:01.05.H0
PHIC:01.05.H0
- For China
ICU(MAIN):C2.05.H0/ICU(BOOT):01.01.H0/LANGUAGE:C1.12.H0/GRA
PHIC:01.05.H0
PHIC:01.05.H0
Item of change: See the accompanying sheet.
Upgrade of PCU-ROM ..... (9)
From July 2009 production
Destinati
on
ROM
control
No.
ICU PCU SCU DSPF
IMAG
E
DATA
OPU
P-
CON
E-
Manual
Except for
China/Tai
wan
E01
0204
H0
0110
H0
0100
H0
0100
H0
0100
H0
0100
H0
0100
H0
0150H
0
For China
D01
C204
H0
C100H
0
For
Taiwan
B01
A204
H0
A100H
0
ROM UPGRADE ..... (9) TO (10).
TECHNICAL BULLETIN
Date:
December 09
Model:
MX-M850/950/1100
Ref.:
REF 33
Colour:
White
Page:
1 of 4
Sharp Electronics (UK) Ltd., Technical Services Group
* The version of the above ICU-ROM is the version written in the ROM
control label, so make sure that the actual version of this ROM is any of
the following (Sim22-5):
the following (Sim22-5):
- Except for China/Taiwan
ICU(MAIN):02.04.H0/ICU(BOOT):01.01.H0/LANGUAGE:01.10.H0/GRA
PHIC:01.05.H0
PHIC:01.05.H0
- For China
ICU(MAIN):C2.04.H0/ICU(BOOT):01.01.H0/LANGUAGE:C1.12.H0/GRA
PHIC:01.05.H0
PHIC:01.05.H0
- For Taiwan
ICU(MAIN):A2.04.H0/ICU(BOOT):01.01.H0/LANGUAGE:A1.00.H0/GRA
PHIC:01.05.H0
PHIC:01.05.H0
Reason to change: In order to correct an error described below.
1. Due to the wide range of the process control sensor, the “Process
1. Due to the wide range of the process control sensor, the “Process
control trouble(OPC drum surface reflection rate abnormality)” error
would display.
would display.
ROM Version Combination History Table (Except for China/Taiwan)
No.
Contr
ol No.
ICU PCU SCU DSPF
IMAGE
DATA
OPU P-CON Action T/R
No.
(8)
E00
0204
H0
0109
H0
0100
H0
0100
H0
0100
H0
0100
H0
0100
H0
2009/
2
HRE-
060
(7)
D01
0201
H0
0108
H0
0100
H0
0100
H0
0100
H0
0100
H0
0100
H0
2008/
9
HRE-
059
(6)
D00
0201
H0
0107
H0
0100
H0
0100
H0
0100
H0
0100
H0
0100
H0
2008/
5
HRE-
043R
(5)
C01
0200
H0
0106
H0
0100
H0
0100
H0
0100
H0
0100
H0
0100
H0
2007/
12
HRE-
027
(4)
C00
0200
H0
0105
H0
0100
H0
0100
H0
0100
H0
0100
H0
0100
H0
2007/
11
HRE-
019
(3)
B01
0110
H0
0105
H0
0100
H0
0100
H0
0100
H0
0100
H0
0100
H0
2007/
10 Mid
(2)
B00
0110
H0
0104
H0
0100
H0
0100
H0
0100
H0
0100
H0
0100
H0
2007/
9 Mid
HRE-
017
(1)
A11
0102
H0
0103
H0
0100
H0
0100
H0
0100
H0
0100
H0
0100
H0
2007/
6 Mid
HRE-
002
Sharp Electronics (UK) Ltd., Technical Services Group
[Description] ROM UPGRADE ..... (10).
No
.
Subject Description
1
MIB information
related
Of counter information displayed in the MFP main body, items that do
not exist in MIB information have been added to MIB information.
not exist in MIB information have been added to MIB information.
2
Software switch-
related
related
With the MX-PEX3 (Fiery controller), by transmitting bi-directionally,
the automatic recognition would recognize the MXPNX3A (2/3 hole
punch unit) as "2 hole". To bypass this, bi-directional communication
check has been removed, controller software SW has been added for
manual selection of 2/3 hole punch. The SW software, switches and
optional configuration in the Fiery controller.
- Controller software switch (Sim55-3) SW No.: 11 DATA: 6
the automatic recognition would recognize the MXPNX3A (2/3 hole
punch unit) as "2 hole". To bypass this, bi-directional communication
check has been removed, controller software SW has been added for
manual selection of 2/3 hole punch. The SW software, switches and
optional configuration in the Fiery controller.
- Controller software switch (Sim55-3) SW No.: 11 DATA: 6
0: Do not warn (default)
1: Warn
1: Warn
3
Authentication
related
related
Due to a setting change of webpage, even if the SNMP v3 setting was
disabled, the authentication key and privacy key input would be
prompted. This glitch has been corrected.
disabled, the authentication key and privacy key input would be
prompted. This glitch has been corrected.
4 Printer-related
If invalid data is added after the EOI marker of JPEG data in printing
of a file such as a PowerPoint file including JEPG data, printing cannot
be performed because a PCL-XL error occurs. A change has been made
so that data after the EOI marker is ignored and printing is performed.
of a file such as a PowerPoint file including JEPG data, printing cannot
be performed because a PCL-XL error occurs. A change has been made
so that data after the EOI marker is ignored and printing is performed.
5 Printer-related
If both sides of an odd page document are printed when MX-PEX3
(Fiery controller) is used, the count may be made by one page extra.
This glitch has been corrected.
(Fiery controller) is used, the count may be made by one page extra.
This glitch has been corrected.
6 Printer-related
If excel data, including specific AutoShape data, is printed with the
printing quality on the application side set to "300dpi", the AutoShape
image may not be printed correctly. This glitch has been corrected.
printing quality on the application side set to "300dpi", the AutoShape
image may not be printed correctly. This glitch has been corrected.
7 Printer-related
When printing from the WEB page of the MFP and “Network Settings
> Printer Port Settings > LPD Settings > Banner Use” is enabled,
printing would hang-up around 1,000 jobs. This glitch has been
corrected.
> Printer Port Settings > LPD Settings > Banner Use” is enabled,
printing would hang-up around 1,000 jobs. This glitch has been
corrected.
8
Support for new
standards of the
standards of the
International
Energy Star
program
The criteria change of the International Energy Star program involves
the following changes of the factory default values for the function of
preheating and auto power shutoff:
the following changes of the factory default values for the function of
preheating and auto power shutoff:
Model
Name
Destinati
on
Before change
After change
Preheati
ng
Auto
power
shutoff
Preheati
ng
Auto
power
shutoff
MX-M850
North
America
Europe
Europe
Australia
China
15 min.
90 min.
5 min.
25 min.
Notes:
Updating to this version dose not involve any change of the setting value
for the MFP printer.
The time required for the function of preheating and auto power
shutoff to be active will be reset to the factory default value as
described above; when a system administrator performs the operation
of saving and/or calling system settings and then resets to the factory
default value, or when destination change (Sim26-6) is implemented.
9
Main body
control-related
When acquired or updated, the delivery tray state may rarely change
to top tray output to the offset tray. This glitch has been corrected.
to top tray output to the offset tray. This glitch has been corrected.
Sharp Electronics (UK) Ltd., Technical Services Group
10 E-Manual
related
Display