Sharp MX-M950 / MX-MM1100 (serv.man2) Handy Guide ▷ View online
- 5 -
MX
MX
MX
MXM850/950/1100 Production Configuration Options
M850/950/1100 Production Configuration Options
M850/950/1100 Production Configuration Options
M850/950/1100 Production Configuration Options
w
w
w
with Plockmatic Bookletmaking System
ith Plockmatic Bookletmaking System
ith Plockmatic Bookletmaking System
ith Plockmatic Bookletmaking System
•
The Plockmatic bookletmaker (and options) replaces the Saddle Unit (MXFNX8).
Cannot
have both in an installation.
•
The Rail unit (MXXBX1) MUST
MUST
MUST
MUST be ordered with every bookletmaker unit (MXBMX1)
•
The Trimmer unit (MXTMX1) and/or the Covers Insertion Module (MXCFX3) require the basic bookletmaker (MXBMX1)
to be installed
to be installed
•
The Squarefold unit (MXFDX2) requires the Trimmer unit and
and
and
and the basic bookletmaker unit.
•
The Covers Insertion Module fits under the top cover of the booklemaker and takes up no additional space. If option is
not taken, the aperture is blocked off.
not taken, the aperture is blocked off.
•
The output module bolts to whichever unit is the last in the installation. It is delivered as part of the basic bookletmaker
unit.
unit.
•
The Plockmatic should always be configured with the MXLCX5 to provide adequate A3 and or A4R paper supply,
commensurate with production booklet production.
commensurate with production booklet production.
•
The Trimmer option (MXTMX1) should always be included where booklets over 15 sheets (@ 80gsm) are being produced;
if 90 or 100gsm then trimmer is required around 12 sheets.
if 90 or 100gsm then trimmer is required around 12 sheets.
•
Preprinted covers for booklets can be inserted via the inline inserter (MXCFX2) or the Covers Insertion Module option
(MXCFX3) on the top of the bookletmaker. Both can be included in the configuration.
(MXCFX3) on the top of the bookletmaker. Both can be included in the configuration.
•
MXCFX2 (Inserter) – up to A3 – max 205 gsm
•
MXCFX3 (Covers Module) – up to SRA3 – max 300 gsm.
This should be the preferred option if the
Customer does a lot of preprinted covers.
Operation with BMX1
Option
Description
In
Configuration
Docked
Un Docked
MXCFX2
Inserter
Y
Y
Y
MXFDX1
ZFold
Y
N
Y
MXFNX8
Saddle Unit
N
MXGBX1
GBC SmartPunch
Y
N
N
Print Controller Options
Print Controller Options
Print Controller Options
Print Controller Options
Part No.
Description
Part No.
Description
MXPBX2
Integrated Printer Expansion Kit (PCL only)
MXPEX3 External EFI Fiery Print Controller
MXPKX4 PS option for above
OR
OR
OR
OR
MXPXX3
Interface Cable (MUST HAVE)
Hole Punch Options
Hole Punch Options
Hole Punch Options
Hole Punch Options
Please refer to page 8
Scanning, Fax and Other Options
Scanning, Fax and Other Options
Scanning, Fax and Other Options
Scanning, Fax and Other Options
Please refer to page 7
Covers Insertion Module
MX-CFX3
Rail Unit
MX-XBX1
Trimmer
MX-TMX1
MX-TMX1
Bookletmaker
MX-BMX1
Squarefold Unit
MX-FDX2
Covers Insertion Module
MX-CFX3
Rail Unit
MX-XBX1
Trimmer
MX-TMX1
MX-TMX1
Bookletmaker
MX-BMX1
Squarefold Unit
MX-FDX2
For power requirements please refer to page 9
For power requirements please refer to page 9
For power requirements please refer to page 9
For power requirements please refer to page 9
- 6 -
MX
MX
MX
MXM850 Office Configuration Options
M850 Office Configuration Options
M850 Office Configuration Options
M850 Office Configuration Options
The above options and configuration are available for the MXM850 model. These configurations enable a small
footprint for limited office space or very small print rooms.
footprint for limited office space or very small print rooms.
The choice of paper input modules is determined by the ‘office’ finishers (MXFNX6 or 7)
No other options can be installed between the MXM850 engine and the finishers (MXFNX6 or 7).
If preprinted inserts, Z folding, SmartPunch or Plockmatic bookletmakers are required then production finisher MXFNX5
is required. Please refer to previous page.
is required. Please refer to previous page.
If the 3 tray SRA3 tray (MXLCX5) is required, then MXFNX5 finisher must be attached. Please refer to previous page.
MXLCX5 cannot be configured with finishers MXFNX6 or 7.
MXLCX5 cannot be configured with finishers MXFNX6 or 7.
Print Controller Options
Print Controller Options
Print Controller Options
Print Controller Options
Part No.
Description
Part No.
Description
MXPBX2
Integrated Printer Expansion Kit (PCL only)
MXPEX3 External EFI Fiery Print Controller
MXPKX4 PS option for above
OR
OR
OR
OR
MXPXX3
Interface Cable (MUST HAVE)
Hole Punch Options
Hole Punch Options
Hole Punch Options
Hole Punch Options
Please refer to page 8
Scanning, Fax and Other Options
Scanning, Fax and Other Options
Scanning, Fax and Other Options
Scanning, Fax and Other Options
Please refer to page 7
Multi Bypass
MX-MFX1
ESSENTIAL ITEM
Required if no LCC or with MXLCX6
or MXLCX3N
Required if no LCC or with MXLCX6
or MXLCX3N
LCC(A3)
MX-LCX3N
Requires MXMFX1 as well
LCC(A4)
MX-LCX6
Requires MXMFX1 as well
Saddle Finisher
MX-FNX7
Finisher
MX-FNX6
3Tray LCC (A4)
MX-LCX4
Multi Bypass
MXMFX2
Option
for MXLCX4
OR
• DSPF Standard
• NIC Standard
• NIC Standard
• Copier only – requires a print
controller for network printing
MX-M850
Multi Bypass
MX-MFX1
ESSENTIAL ITEM
Required if no LCC or with MXLCX6
or MXLCX3N
Required if no LCC or with MXLCX6
or MXLCX3N
LCC(A3)
MX-LCX3N
Requires MXMFX1 as well
LCC(A4)
MX-LCX6
Requires MXMFX1 as well
Saddle Finisher
MX-FNX7
Finisher
MX-FNX6
3Tray LCC (A4)
MX-LCX4
Multi Bypass
MXMFX2
Option
for MXLCX4
OR
• DSPF Standard
• NIC Standard
• NIC Standard
• Copier only – requires a print
controller for network printing
MX-M850
LCC(A3)
MX-LCX3N
Requires MXMFX1 as well
LCC(A4)
MX-LCX6
Requires MXMFX1 as well
Saddle Finisher
MX-FNX7
Finisher
MX-FNX6
3Tray LCC (A4)
MX-LCX4
Multi Bypass
MXMFX2
Option
for MXLCX4
OR
• DSPF Standard
• NIC Standard
• NIC Standard
• Copier only – requires a print
controller for network printing
MX-M850
For power requirements please refer to page 9
For power requirements please refer to page 9
For power requirements please refer to page 9
For power requirements please refer to page 9
- 7 -
Scanning, Fax and Other Options
Scanning, Fax and Other Options
Scanning, Fax and Other Options
Scanning, Fax and Other Options
→
→
→
→
Available on all MXM850/950/1100 models and all configurations
Scanning Options
Scanning Options
Scanning Options
Scanning Options
Part No.
Part No.
Part No.
Part No.
Description
Description
Description
Description
Notes
Notes
Notes
Notes
MXNSX1
Scanning Expansion Kit
Requires a print controller MXPBX2 or MXPEX3/MXPXX3 –
with latest machine firmware.
with latest machine firmware.
MXEBX1
Colour Expansion Kit
Requires MXNSX1
Fax Options
Fax Options
Fax Options
Fax Options
Part No.
Part No.
Part No.
Part No.
Description
Description
Description
Description
Notes
Notes
Notes
Notes
MXFXX1
Fax Expansion Kit
If PC Fax functionality is required, then a print controller –
MXPBX or MXPEX3/MXPXX3 is required as well.
MXPBX or MXPEX3/MXPXX3 is required as well.
ARSU1
Stamp Kit
Includes a cartridge
ARSV1
Cartridge for Stamp Kit
Replaceable cartridge for Stamp Kit. Contains 2.
MXFWX1
iFax Kit
OSA
OSA
OSA
OSA
Part No.
Part No.
Part No.
Part No.
Description
Description
Description
Description
Notes
Notes
Notes
Notes
MXAMX1
Application Integration Module (AIM)
Requires MXNSX1
MXAMX2
Application Communication Module (ACM)
Requires MXNSX1
MXAMX3
External Accounting Module (EAM)
Data Security Kit
Data Security Kit
Data Security Kit
Data Security Kit
Part No.
Part No.
Part No.
Part No.
Description
Description
Description
Description
Notes
Notes
Notes
Notes
MXFRX8U
Non CC Version
MXFRX8
CC Version
These items are not held in stock in UK. Please allow 3 months
for delivery. Items cannot be ordered online.
for delivery. Items cannot be ordered online.
- 8 -
Hole Punch Options
Hole Punch Options
Hole Punch Options
Hole Punch Options
Sharp Finishers
Sharp Finishers
Sharp Finishers
Sharp Finishers
Finisher
Part No
Description
MXPNX4A
2 Hole Punch unit
MXPNX4C
Switchable 2/4 Hole Punch Unit
MX
MX
MX
MXFNX6
FNX6
FNX6
FNX6
50 Sheet Finisher
MXPNX4D
4 Hole Wide Punch Unit
MXPNX4A
2 Hole Punch unit
MXPNX4C
Switchable 2/4 Hole Punch Unit
MX
MX
MX
MXFNX7
FNX7
FNX7
FNX7
50/15 Sheet Saddle Finisher
MXPNX4D
4 Hole Wide Punch Unit
MXPNX3A
2 Hole Punch unit
MXPNX3C
Switchable 2/4 Hole Punch Unit
MX
MX
MX
MXFNX5
FNX5
FNX5
FNX5
100 Sheet Finisher
MXPNX3D
4 Hole Wide Punch Unit
SmartPunch
SmartPunch
SmartPunch
SmartPunch
Part No.
Application
Hole Type
Description
MX
MX
MX
MXGBX21
GBX21
GBX21
GBX21
21 Hole Die set
PB GBC
PB GBC
PB GBC
PB GBC
Provides 21 holes for standard CombBind
applications.
applications.
MX
MX
MX
MXG
G
G
GBX20
BX20
BX20
BX20
20 Hole Die set
PB GBC
PB GBC
PB GBC
PB GBC
Provides 20 holes for standard CombBind
applications
applications
MX
MX
MX
MXGBX34
GBX34
GBX34
GBX34
34 Hole Die set
W3 GBC
W3 GBC
W3 GBC
W3 GBC
Provides 34 round holes for WireBind 3:1
applications
applications
MX
MX
MX
MXGBX23
GBX23
GBX23
GBX23
23 Hole Die set
W2 GBC
W2 GBC
W2 GBC
W2 GBC
Provides 23 round holes for WireBind 2:1
applications
applications
MX
MX
MX
MXGBX12
GBX12
GBX12
GBX12
12 Hole Die set
VB GBC
VB GBC
VB GBC
VB GBC
Provides 12 round holes for VeloBind or
Sure Bind applications
Sure Bind applications
MX
MX
MX
MXGBX47
GBX47
GBX47
GBX47
47 Hole Die set
C4 GBC
C4 GBC
C4 GBC
C4 GBC
Provides 47 round holes for coil bind
applications.
applications.
MX
MX
MX
MXGBX34PR
GBX34PR
GBX34PR
GBX34PR
34 Hole Die set
PC GBC
PC GBC
PC GBC
PC GBC
Provides 34 holes for GBC ProClick
applications
applications
MX
MX
MX
MX2H65
2H65
2H65
2H65
2 Hole 80mm Dieset
2H GBC
2H GBC
2H GBC
2H GBC
Leverarch Files
Provides 2 x 6.5mm holes for standard
leverarch filing
leverarch filing
MX
MX
MX
MX4H65
4H65
4H65
4H65
4 Hole 80mm Dieset
4H GBC
4H GBC
4H GBC
4H GBC
Leverarch Files
Provides 4 x 6.5mm holes for standard
leverarch filing
leverarch filing
MX
MX
MX
MX2H80
2H80
2H80
2H80
2 Hole 80mm Dieset
2H GBC
2H GBC
2H GBC
2H GBC
Leverarch Files
Provides 2 x 8.0mm holes for standard
leverarch filing
leverarch filing
MX
MX
MX
MX4H80
4H80
4H80
4H80
4 Hole 80mm Dieset
4H GBC
4H GBC
4H GBC
4H GBC
Leverarch Files
Provides 4 x 8.0mm holes for standard
leverarch filing
leverarch filing
Please Note : A
Please Note : A
Please Note : A
Please Note : Above graphics do not represent actual punch patterns, spacing or hole sizes.
bove graphics do not represent actual punch patterns, spacing or hole sizes.
bove graphics do not represent actual punch patterns, spacing or hole sizes.
bove graphics do not represent actual punch patterns, spacing or hole sizes.
4H GBC – identifying GBC code on dieset
Click on the first or last page to see other MX-M950 / MX-MM1100 (serv.man2) service manuals if exist.