DOWNLOAD Sharp MX-M700U (serv.man3) Service Manual ↓ Size: 8.27 MB | Pages: 60 in PDF or view online for FREE

Model
MX-M700U (serv.man3)
Pages
60
Size
8.27 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Installation Manual
File
mx-m700u-sm3.pdf
Date
PREV: Sharp MX-M700U (serv.man2) Service Manual

Sharp MX-M700U (serv.man3) Service Manual ▷ View online

AR-M550/M620/M700  INSTALLATION MANUAL  (AR-M550/M620/M700)  1 - 3
4) Remove the adjuster cover and the screw (in the bag).
5) Cut the four corners of the bottom case.
6) Lift the machine slightly, and remove the bottom pad L.
7) Lift the machine slightly, and remove the bottom pad R.
8) Remove the slope.
∗
Slope: Parts
9) Attach the slope to the concave section of the skid.
10) Hold the machine grips and push them down in the arrow direc-
tion.
Part name
Part code
Skid slope
DKiT-0367FCZZ
: Feb. 9 2004
2
AR-M550/M620/M700  INSTALLATION MANUAL  (AR-M550/M620/M700)  1 - 4
B. Adjuster cover installation
1) Move the main unit to the installing position, and turn the adjuster to
fix the main unit.
2) Remove the bottom tray from the main unit.
3) Install the adjuster cover to the main unit.
4)
Insert the bottom tray into the main unit.
Note: This machine includes a hard disk drive, which must be pro-
tected against vibrations and shocks.
Never move the machine with the power ON.
Packed items
C. Remove the fixing tape and the reinforcing 
material
2
1
Driver (CD-ROM)
x 1
2
Operation manual
x 1
3
Delivery and installation report
x 1
4
Paper exit tray
x 1
1
2
3
4
AR-M550/M620/M700  INSTALLATION MANUAL  (AR-M550/M620/M700)  1 - 5
D. Lock release
(1) No. 2/3 mirror base lock release
Remove the No. 2/3 mirror base fixing screw and the label of note for
unpacking on the left side.
(2) Tray rotation release plate lock release
Remove the paper feed tray rotation plate fixing screw and the label of
note for tray.
[Tray 1, Tray 2]
[Tray 3, Tray 4]
E. Press the fusing section (upper and lower heat 
rollers) and remove the process separation pawl 
fixing block.
1) Pull the knob on the left door to pull out the left door.
2) Turn the pressing screw in the fusing section as shown in the figure
below (fully loosen it) to press the heat roller.
3) Remove the separation pawl fixing block from the process unit.
4) Replace the left door.
Lock position
1
No. 2/3 mirror base lock screw
2
Tray rotation plate fixing material
2
AR-M550/M620/M700  INSTALLATION MANUAL  (AR-M550/M620/M700)  1 - 6
F. Set developer
(1) Supply developer
1) Open the front cabinet.
2) Loosen the blue screw of the process cover, and tilt down the pro-
cess cover toward you.
3) Loosen the blue screw which is fixing the developing unit.
4) While pressing the developing unit lock lever, pull out the develop-
ing unit.
Hold the strap of the developing unit and remove the developing
unit.
5) Remove the four fixing screws of toner hopper in the developing
unit.
6) While supplying developer from the developer supply port of the
developing unit, turn the MG gear clockwise with a plus screwdriver
to supply all developer to the developing unit.
7) Install the toner hopper to the developing unit.
8) Insert the developing unit to the main unit and fix it with the blue
screw.
9) Close the process cover and fix it with the blue screw.
(2) Toner set
1) Remove the toner cartridge from the box, and shake it several
times horizontally.
Note: Be sure to shake the toner cartridge horizontally.
Be careful not rotate as shown in the figure below.
2) Insert the toner cartridge into the  main unit insertion port as shown
below. In this case, do not turn the cartridge.
3) Insert the toner cartridge until it is locked.
2
1
Page of 60
Display

Sharp MX-M700U (serv.man3) Service Manual ▷ Download

  • DOWNLOAD Sharp MX-M700U (serv.man3) Service Manual ↓ Size: 8.27 MB | Pages: 60 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp MX-M700U (serv.man3) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp MX-M700U (serv.man3) Copying Equipment. Information contained in Sharp MX-M700U (serv.man3) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.

Found More:

MX-M700U (serv.man3) Service Manuals

Preview DownloadPagesSize
MX-M700U (serv.man2) Circuit Diagram Service Manual 127 8.65 MB
MX-M700U (serv.man4) Complete Service Manual Service Manual 45.75 MB
MX-M700U (serv.man7) Operation Manual User Manual / Operation Manual 127 4.84 MB
MX-M700U (serv.man8) Administrator Settings Guide User Manual / Operation Manual 28 318.71 KB
MX-M700U (serv.man9) Software Setup Guide User Manual / Operation Manual 44 2.01 MB
MX-M700U (serv.man5) MX-NBX1 BOOT ROMS Service Manual / Parts Guide 2 46.08 KB
MX-M700U (serv.man6) Parts Guide (Complete) Service Manual / Parts Guide 127 15 MB
MX-M700U (serv.man47) Ref ARE916 IMPROVEMENT IN PAPER FEEDING PERFOMANCE OF SPF. Service Manual / Technical Bulletin 2 94.05 KB
MX-M700U (serv.man36) ARE-969 IMPROVEMENT BY REMOVING THE SHAFT BEARINGS OF THE PS ROLLER REAR SIDE. Service Manual / Technical Bulletin 2 154.15 KB
MX-M700U (serv.man46) ARE910 MX-M550U 620U 700U Firmware upgrade p u3.01.D0. Service Manual / Technical Bulletin 3 32.62 KB
MX-M700U (serv.man45) Ref ARE917 NEW UPPER HEAT ROLLER AVALIBLE FOR MACHINES SUFFERING PREMATURE EROTION DUE TO PAPER TYPE. Service Manual / Technical Bulletin 1 33.4 KB
MX-M700U (serv.man44) Ref CCE694 CHANGE OF INITIAL VALUES OF PREHEAT MODE AND AUTO POWER SHUT-OFF MODE INVOLVED IN SUPPORT OF ENERGY STAR VER1.1 (TIER II). Service Manual / Technical Bulletin 1 22.91 KB
MX-M700U (serv.man43) CHANGE OF INITIAL VALUES OF PREHEAT MODE AND AUTO POWER SHUT-OFF MODE OF ENERGY STAR VER1.1 Service Manual / Technical Bulletin 2 20.01 KB
MX-M700U (serv.man42) ARE936 IMPROVEMENT AGAINST TONER SPLATTERING FROM UNDER THE SUB BLADE. Service Manual / Technical Bulletin 2 355.35 KB
MX-M700U (serv.man41) REF ARE-947 SUB-HEATER CLEANING FELT PLATE CHANGE, TO PREVENT PEALING OF THE FELT FROM PLATE. Service Manual / Technical Bulletin 2 270.86 KB
MX-M700U (serv.man40) Operations Required for Machine Movement Service Manual / Technical Bulletin 1 14.68 KB
MX-M700U (serv.man39) ARE-956 IMPROVEMENTS MADE TO THE PROCESS UNIT AGAINST TONER SPLASHING ON THE SUB-BLADE Service Manual / Technical Bulletin 3 1.26 MB
MX-M700U (serv.man38) ARE-957 PREVENTION OF THE COOLING FAN MOTOR BEARING FIXING FROM BEING STRIPPED Service Manual / Technical Bulletin 2 195.25 KB
MX-M700U (serv.man37) REF ARE960 PRECAUTIONS WHEN REPLACING THE DV SIDE SEAL Service Manual / Technical Bulletin 3 1.26 MB
MX-M700U (serv.man33) Ref CCE779 AR-CF2 COUNTERMEASURES FOR JAM (HI_SEN_S, ETC.)RESULTING FROM MISALIGNED SPRING HOOK SECTION OF Service Manual / Technical Bulletin 2 342.03 KB
MX-M700U (serv.man48) REF AER900 COUNTER MEASURE AGAINST REVERSE PRESSURE RELEASE LEVER COMING AWAY FROM ITS HOOK. Service Manual / Technical Bulletin 1 106.88 KB
MX-M700U (serv.man49) ARE-891R NEW SETUP PROCEDURE WHEN REPLACING DEVELOPER (SUPERSEDING BULLETIN DATED 1ST JULY 2008) Service Manual / Technical Bulletin 1 69.32 KB
MX-M700U (serv.man50) AR-F16 Saddle unit ROM UPGRADE Service Manual / Technical Bulletin 1 25.71 KB
MX-M700U (serv.man51) AR-F15 F16 ROM UPGRADE Service Manual / Technical Bulletin 1 27.39 KB
MX-M700U (serv.man52) ENHANCEMENT OF STRENGTH OF DSPF (SPF) ADJUST PLATES F R. Service Manual / Technical Bulletin 2 409.12 KB
MX-M700U (serv.man53) CHANGE TO THE TONER DENSITY REFERENCE SETUP PROCEDURE IN THE INSTALLATION MANUAL. Service Manual / Technical Bulletin 2 171.43 KB
MX-M700U (serv.man54) TONER CARTRIDGE NOT FITTING CORRECTLY, DUE TO THE TONER HOPPER CONNECTOR PLATE DEFORMING. Service Manual / Technical Bulletin 2 285.57 KB
MX-M700U (serv.man55) ARE882-F2-00 ETC. DUE TO POOR CONTACT BETWEEN TRANSFER AC TERMINAL AND TRANSFER ELECTRODE SPRING. Service Manual / Technical Bulletin 2 343.86 KB
MX-M700U (serv.man56) Counter Measures Taken When Copy lamp Is Not Switched On Due To Glass Being Charged Service Manual / Technical Bulletin 2 85.72 KB
MX-M700U (serv.man57) Strength Improvement Of The Output Axis Gear (Lift Motor A) Service Manual / Technical Bulletin 2 75.64 KB
MX-M700U (serv.man58) Measures Against F1-02 Trouble Service Manual / Technical Bulletin 2 75.64 KB
MX-M700U (serv.man59) Improvement Of Image Quality Service Manual / Technical Bulletin 2 92.99 KB
MX-M700U (serv.man60) ROM (Firmware) Upgrade .1 Service Manual / Technical Bulletin 23.92 KB
MX-M700U (serv.man34) Ref ARE971 MX-F16 NEW SERVICE PARTS FOR THE SADDLE-STITCH FINISHER EJECTION TRAYS Service Manual / Technical Bulletin 6 2.24 MB
MX-M700U (serv.man35) ARE-917R INTRODUCTION OF SUBITUTE UPPER HEAT ROLLER FOR PAPER TYPES CAUSING EROSION. Service Manual / Technical Bulletin 1 28.82 KB
MX-M700U (serv.man22) Parts change for productivity improvement. Service Manual / Technical Bulletin 3 184.15 KB
MX-M700U (serv.man23) Change of Photo Sensor and Harness Service Manual / Technical Bulletin 3 962.43 KB
MX-M700U (serv.man24) Starting Powder List (This list takes priority over information in Service Manuals). Service Manual / Technical Bulletin 4 66.25 KB
MX-M700U (serv.man25) Recommended shutdown procedure and Power Cycling of MFD Service Manual / Technical Bulletin 1 186.43 KB
MX-M700U (serv.man26) IMPORTANT Handling of EEPROM's. Service Manual / Technical Bulletin 5 203.32 KB
MX-M700U (serv.man27) ARE-1108 CHANGE OF THE CONNECTOR FOR STAPLE UNIT ETC. Service Manual / Technical Bulletin 2 126.74 KB
MX-M700U (serv.man28) ARE-1085 Modified waste toner transfer pipe due to Leakage. Service Manual / Technical Bulletin 2 108.21 KB
MX-M700U (serv.man29) ARE1010 REMOVAL OF SCREWS FROM THE DUCT AND REAR FRAME 2 3. Service Manual / Technical Bulletin 2 407.03 KB
MX-M700U (serv.man30) REF ARE 1002 PREVENTION OF THE MANUAL PAPER FEED UNIT SEPARATION TORQUE LIMITER COMING LOOSE. Service Manual / Technical Bulletin 2 182.34 KB
MX-M700U (serv.man31) ARE 991 DAMAGE TO THE 1ST 2ND PAPER FEED DRIVE UNIT AND THE DRUM DRIVE UNIT SHAFTS. Service Manual / Technical Bulletin 3 576.33 KB
MX-M700U (serv.man32) Ref ARE 984 IMAGE TROUBLE (WHITE STREAKS) CAUSED BY GRINDING DOWN OF THE DRUM. Service Manual / Technical Bulletin 2 597.25 KB
MX-M700U (serv.man11) SAP Device Types for MX Mono devices. Driver / Update 3.18 MB
MX-M700U (serv.man21) Latest OSA Firmware U Model u2.50.J71113a Driver / Update 12.95 MB
MX-M700U (serv.man12) Refer to Bulletin Ref ARE-953 Driver / Update 14.06 MB
MX-M700U (serv.man13) Refer to Bulletin Ref ARE-953 Driver / Update 14.39 MB
MX-M700U (serv.man14) Refer to Bulletin Ref ARE-953 Driver / Update 13.06 MB
MX-M700U (serv.man15) MX-M550U 620U 700U Firmware upgrade U3.02.D0. For models not fitted with MX-NBX1 Driver / Update 13.08 MB
MX-M700U (serv.man16) MX-M550P 620P 700P Firmware upgrade P3.02.D0. For models fitted with MX-NBX1 Driver / Update 14.08 MB
MX-M700U (serv.man17) DSK COMBINED FIRMWARE MX-FRX5U VERSION MAIN 1.4 BOOT M1.5A Driver / Update 14.35 MB
MX-M700U (serv.man18) PJL command to remove blank pages from a print job. Driver / Update 453 B
MX-M700U (serv.man19) MXM550 620 700 Linux UNIX PPD for CUPS. Includes installer to put the PPD file in the correct location. (Version 1.1) Driver / Update 342.44 KB
MX-M700U (serv.man20) Latest OSA Firmware P Model p2.50.J71113a Driver / Update 13.95 MB
MX-M700U April 07 Handy Guide 32 363.37 KB
MX-M700U (serv.man10) How To Read A Main Machine Serial Number FAQ 1 16.5 KB
MX-M700U (serv.man62) AR620DV (Developer) MSDS No F-31221 Regulatory Data 4 29.19 KB
MX-M700U (serv.man63) AR621T (Toner Cartridge) MSDS No F-31221 Regulatory Data 4 35.99 KB
MX-M700U (serv.man61) MX-M700U Digital Multifunctional System Brochure Brochure 12 2.55 MB

RANDOM: