DOWNLOAD Sharp MX-M654N / MX-M754N (serv.man74) Service Manual ↓ Size: 339.06 KB | Pages: 1 in PDF or view online for FREE

Model
MX-M654N MX-M754N (serv.man74)
Pages
1 Few pages! See other manuals at the bottom of the first or last page.
Size
339.06 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Copying Equipment / How to change the image maximum density
File
mx-m654n-mx-m754n-sm74.pdf
Date

Sharp MX-M654N / MX-M754N (serv.man74) Service Manual / Technical Bulletin ▷ View online

 
 
 
Sharp Electronics (UK) Ltd., Technical Services Group
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1. Model Name:  MX-M654N/M754N 
 
2. Summary: 
MX-M654N/M754N are shipped with the setting of the best optimum image as the  
Factory Default, however if the image maximum density needs to be changed from the standard setting 
value at the customer’s request, it can be changed by the following procedure: (e.g. if the image highest 
density needs to be closer to the existing models <MX-M623N/M753N>, this setting change is available.) 
 
 
 
Procedure: 
 
 
  (1)Enter Sin44-62 and press “PROCON TARGET”. 
 
 
  (2)Check the current density level in [      ] at the right side of PRCON TARGET  
 
 
    (SIM44-04) COLLECTIVE INPUT located at the second line from the top. 
 
 
  (3)Select the desired density level from below, and press “EXECUTE” and then press  
 
 
    “YES”. 
 
 
   <Selectable density levels> 
 
 
     ID DOWN (-2): Select this when you want to decrease the density level. 
 
 
     ID DOWN (-1): Select this when you want to slightly decrease the density level. 
 
 
     NORMAL (0): Standard state (Default setting) 
 
 
     ID UP   (+1): Select this when you want to slightly increase the density level. 
 
 
     ID UP   (+2): Select this when you want to increase the density level. 
 
 
     CUSTOM   : Custom setting is possible but it is not used this time. 
 
 
  (4)Enter SIM44-6 and press “EXECUTE” to start the high density process control. 
 
 
  (5)When “COMPLETE” is displayed, press “EXIT” key to terminate SIM. 
 
 
 
  Note: When changing the setting, please be aware of the following points: 
 
 
   - If the setting to increase the density level more than the standard level is selected,  
 
 
    the toner consumption amount will increase in stages. 
 
 
   - If the setting to increase the density level more than the standard level is selected,  
 
 
    the waste toner container may be full at an early stage. 
 
 
How to change the image maximum density 
TECHNICAL BULLETIN 
 
Date:  
3
rd
 December 2014 
Model:  
See Below 
Ref.:   
ARE1148 
Colour:  
White 
Page:  
1 of 1 
Display

Sharp MX-M654N / MX-M754N (serv.man74) Service Manual / Technical Bulletin ▷ Download

  • DOWNLOAD Sharp MX-M654N / MX-M754N (serv.man74) Service Manual ↓ Size: 339.06 KB | Pages: 1 in PDF or view online for FREE
  • Here you can View online or download the Service Manual / Technical Bulletin for the Sharp MX-M654N / MX-M754N (serv.man74) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp MX-M654N / MX-M754N (serv.man74) Copying Equipment. Information contained in Sharp MX-M654N / MX-M754N (serv.man74) Service Manual / Technical Bulletin (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.