Sharp MX-M623U / MX-M753U (serv.man85) Regulatory Data ▷ View online
SAFETY DATA SHEET
Revision Date
: 30.June 2015
Date of first issue : 1. January 2010
SDS Number
: F-31881
4 / 8
Dust deposits should not be allowed to accumulate on
surfaces, as these may form an explosive mixture if they are
released into the atmosphere in sufficient concentration.
Local or national regulations may apply to releases and
disposal of this material, as well as those materials and items
employed in the cleanup of releases.
You will need to determine which regulations are applicable.
Sections 13 and 15 of this SDS provide information regarding
certain local or national requirements.
6.4 Reference to other sections
See sections: 7, 8, 11, 12 and 13.
SECTION 7: Handling and storage
7.1 Precautions for safe handling
Technical measures
: Static electricity may accumulate and ignite suspended dust
causing an explosion.
Provide adequate precautions, such as electrical grounding
and bonding, or inert atmospheres.
Advice on safe handling
: Do not breathe dust. Do not swallow. Avoid contact with eyes.
Handle in accordance with good industrial hygiene and safety
practice. Keep container tightly closed.
Minimize dust generation and accumulation.
Keep away from heat and sources of ignition.
Take care to prevent spills, waste and minimize release to the
environment.
Hygiene measures : When using do not eat, drink or smoke.
Wash contaminated clothing before re-use.
7.2 Conditions for safe storage, including any incompatibilities
Requirements for storage
: Keep tightly closed. Keep in a cool, well-ventilated place.
areas and containers
Store in accordance with the particular national regulations.
Advice on common storage
: Do not store with the following product types:
Strong oxidizing agents
Organic peroxides
Explosives
Gases
7.3 Specific end use(s)
Specific use(s)
: No data available
SAFETY DATA SHEET
Revision Date
: 30.June 2015
Date of first issue : 1. January 2010
SDS Number
: F-31881
5 / 8
SECTION 8: Exposure controls/personal protection
8.1 Control parameters
Occupational Exposure Limits
Components
CAS-No.
Value type
(Form of exposure)
(Form of exposure)
Control parameters
Basis
Carbon black
1333-86-4
TWA
3.5 mg/m3
GB EH40
STEL
7 mg/m3
GB EH40
8.2 Exposure controls
Engineering measures
Minimize workplace exposure concentrations.
Apply measures to prevent dust explosions.
Personal protective equipment
Eye protection
: Not required under intended use
Hand protection
: Not required under intended use
Skin and body protection
: Not required under intended use
Respiratory protection
: Not required under intended use
SECTION 9: Physical and chemical properties
9.1 Information on basic physical and chemical properties
Appearance
: Powder
Colour
: Black
Odour
: Odourless
Odour Threshold
: No data available
pH
: No data available
Melting point/freezing point
: Not applicable
Initial boiling point and boiling range
: No data available
Flash point
: Not applicable
Evaporation rate
: Not applicable
Flammability (solid, gas)
: Not classified as a flammability hazard
Upper explosion limit
: No data available
Lower explosion limit
: No data available
Vapour pressure
: Not applicable
Relative vapour density
: Not applicable
Density
: ca. 5,0 g/cm3
Bulk density
: ca. 2,0 g/cm3
Solubility(ies)
Water solubility
: negligible
Partition coefficient: noctanol/water
: Not applicable
SAFETY DATA SHEET
Revision Date
: 30.June 2015
Date of first issue : 1. January 2010
SDS Number
: F-31881
6 / 8
Auto-ignition temperature
: No data available
Decomposition temperature
: No data available
Viscosity
: Not applicable
Explosive properties
: Not explosive
Oxidizing properties
: The substance or mixture is not classified as oxidizing.
9.2 Other information
No data available
SECTION 10: Stability and reactivity
10.1 Reactivity
Not classified as a reactivity hazard.
10.2 Chemical stability
Stable under normal conditions.
10.3 Possibility of hazardous reactions
Hazardous reactions
: Dust can form an explosive mixture in air.
Can react with strong oxidizing agents.
10.4 Conditions to avoid
Conditions to avoid
: None known.
10.5 Incompatible materials
Materials to avoid
: Oxidizing agents
10.6 Hazardous decomposition products
No hazardous decomposition products are known.
SECTION 11: Toxicological information
11.1 Information on toxicological effects
Information on likely routes of exposure : Inhalation
Skin contact
Ingestion
Eye contact
Acute toxicity
Acute oral toxicity
: LD50 : > 2.000 mg/kg
Acute inhalation toxicity
: No data available
Skin corrosion/irritation
No skin irritation
Serious eye damage/eye irritation
No data available
Respiratory or skin sensitisation
No sensitization
SAFETY DATA SHEET
Revision Date
: 30.June 2015
Date of first issue : 1. January 2010
SDS Number
: F-31881
7 / 8
Germ cell mutagenicity
AMES : negative
Carcinogenicity
Not classified based on available information.
Reproductive toxicity
No data available
STOT - single exposure
No data available
STOT - repeated exposure
No data available
Aspiration toxicity
Not relevant
SECTION 12: Ecological information
12.1 Toxicity
No data available
12.2 Persistence and degradability
No data available
12.3 Bioaccumulative potential
No data available
12.4 Mobility in soil
No data available
12.5 Results of PBT and vPvB assessment
Not relevant
12.6 Other adverse effects
No data available
SECTION 13: Disposal considerations
13.1 Waste treatment methods
Product
: Dispose of in accordance with local regulations.
According to the European Waste Catalogue, Waste Codes
are not product specific, but application specific.
Waste codes should be assigned by the user, preferably in
discussion with the waste disposal authorities.
Contaminated packaging
: Dispose of as unused product.
Empty containers should be taken to an approved waste
handling site for recycling or disposal.
Display