DOWNLOAD Sharp MX-M623U / MX-M753U (serv.man67) Service Manual ↓ Size: 29.51 KB | Pages: 3 in PDF or view online for FREE

Model
MX-M623U MX-M753U (serv.man67)
Pages
3 Few pages! See other manuals at the bottom of the first or last page.
Size
29.51 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Copying Equipment / ARE-1018 Combined firmware MX-M623U M753U ROM UPGRADE(3).Production Run Nov 2011
File
mx-m623u-mx-m753u-sm67.pdf
Date

Sharp MX-M623U / MX-M753U (serv.man67) Service Manual / Technical Bulletin ▷ View online

 
 
 
Sharp Electronics (UK) Ltd., Document Systems Support
 
 
 
[Description] 
No. 
Item 
Details 
Copy-related 
Page characters have been localized for Europe. 
Copy-related 
The performance has been improved for the output when the paper types whose 
width is the same such as Letter/Legal and A4/A3 etc are mixed. 
Copy-related 
The performance has been improved for 2-sided copy when MXFN15 is installed. 
Printer-related 
When printing the certain data from Adobe InDesign application in Mac OSX 
environment, MFP might hang up.  This problem has been corrected. 
Printer-related 
When printing from Linux, PS error occurred if the data that the special set 
command was contained.  This problem has been corrected. 
FAX-related 
When the User Authentication was OFF and if the Own Name/Sender Name was set 
to the default, the Name/Sender might not be printed on the receiver's side when 
sending the Fax.  This problem has been corrected. 
FAX-related 
When receiving FAX data in MIME single part format by direct SMTP, the machine 
would hang-up. This glitch has been corrected. 
FAX-related 
When "Image confirmation of receiving data setting" is enabled in preview settings 
and the "Data received. Would you like to confirm?" message is displayed, even if 
"Yes" is pressed, the home screen would not change. This glitch has been 
corrected. 
FAX-related 
When the incoming FAX call arrives during the transition processing to Shut-Off, 
the machine was in the line connection status but it hanged up with the panel not 
being lit. Even if the Power Save button was pressed it could not be recovered.  
This problem has been corrected. 
10 
FAX-related 
When receiving i-FAX data of 300dpi×300dpi, it was printed with the reduced size. 
This problem has been corrected. 
11 
Scanner-related 
When scanning with TWAIN, the line might appear at the bottom of the image that 
was scanned.  This problem has been corrected. 
12 
OSA-related 
On OSA application, even when changing the name attribute of the Input tag to 
dynamic with JavaScript, the indication did not change.  This problem has been 
corrected. 
13 
OSA-related 
After the log-in with external authentication mode, when starting OSA application 
from HOME with the shortcut, the screen would not return to the login screen even 
by the Auto Clear.  This problem has been corrected. 
14 
UI-related 
"Disable Manual Finishing" setting which is, in fact, not functioning was displayed 
on the System Settings screen.  
This problem has been corrected. 
 
 
 
Sharp Electronics (UK) Ltd., Document Systems Support
 
 
 
 
No. 
Item 
Details 
15 
Web page-related 
When selecting the "Save and Delete the Data" in the job log menu of the Web 
Page and then cancelling it, the data would be deleted.  This problem has been 
corrected. 
16 
Web page-related 
When printing from a web page, saddle stitch function was greyed out and 
unusable. The saddle stitch function has been enabled. 
17 
Simulation-related 
Even though the timing of the E-Mail alert for Toner Low with SIM26-29 "E" was 
changed, the detection timing of Toner Low on PAU5 did not change.  This 
problem has been corrected. 
18 
Job log-related 
If the single quotation mark was included as the machine name etc, the data might 
not be recorded in the job log.  This problem has been corrected. 
19 
Other 
When acquiring the machine information using MIB, the value of “if Out Errors” 
would be much higher .   This problem has been corrected. 
20 
Other 
The condition of the contrast of LCD did not stay after the power OFF/ON, and 
returned to the default condition.  This problem has been corrected. 
21 
Other 
After open/close of the left door, the backside of the first output page might get 
soiled. 
This problem has been corrected. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Sharp Electronics (UK) Ltd., Document Systems Support
 
 
 
 
No. 
Item 
Details 
15 
Web page-related 
When selecting the "Save and Delete the Data" in the job log menu of the Web 
Page and then cancelling it, the data would be deleted.  This problem has been 
corrected. 
16 
Web page-related 
When printing from a web page, saddle stitch function was greyed out and 
unusable. The saddle stitch function has been enabled. 
17 
Simulation-related 
Even though the timing of the E-Mail alert for Toner Low with SIM26-29 "E" was 
changed, the detection timing of Toner Low on PAU5 did not change.  This 
problem has been corrected. 
18 
Job log-related 
If the single quotation mark was included as the machine name etc, the data might 
not be recorded in the job log.  This problem has been corrected. 
19 
Other 
When acquiring the machine information using MIB, the value of “if Out Errors” 
would be much higher .   This problem has been corrected. 
20 
Other 
The condition of the contrast of LCD did not stay after the power OFF/ON, and 
returned to the default condition.  This problem has been corrected. 
21 
Other 
After open/close of the left door, the backside of the first output page might get 
soiled. 
This problem has been corrected. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Sharp Electronics (UK) Ltd., Document Systems Support
 
 
 
 
No. 
Item 
Details 
15 
Web page-related 
When selecting the "Save and Delete the Data" in the job log menu of the Web 
Page and then cancelling it, the data would be deleted.  This problem has been 
corrected. 
16 
Web page-related 
When printing from a web page, saddle stitch function was greyed out and 
unusable. The saddle stitch function has been enabled. 
17 
Simulation-related 
Even though the timing of the E-Mail alert for Toner Low with SIM26-29 "E" was 
changed, the detection timing of Toner Low on PAU5 did not change.  This 
problem has been corrected. 
18 
Job log-related 
If the single quotation mark was included as the machine name etc, the data might 
not be recorded in the job log.  This problem has been corrected. 
19 
Other 
When acquiring the machine information using MIB, the value of “if Out Errors” 
would be much higher .   This problem has been corrected. 
20 
Other 
The condition of the contrast of LCD did not stay after the power OFF/ON, and 
returned to the default condition.  This problem has been corrected. 
21 
Other 
After open/close of the left door, the backside of the first output page might get 
soiled. 
This problem has been corrected. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Display

Sharp MX-M623U / MX-M753U (serv.man67) Service Manual / Technical Bulletin ▷ Download

  • DOWNLOAD Sharp MX-M623U / MX-M753U (serv.man67) Service Manual ↓ Size: 29.51 KB | Pages: 3 in PDF or view online for FREE
  • Here you can View online or download the Service Manual / Technical Bulletin for the Sharp MX-M623U / MX-M753U (serv.man67) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp MX-M623U / MX-M753U (serv.man67) Copying Equipment. Information contained in Sharp MX-M623U / MX-M753U (serv.man67) Service Manual / Technical Bulletin (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.