Sharp MX-M364N / MX-565N (serv.man4) Service Manual ▷ View online
MX-M565N SIMULATION 5 – 27
5: 200 sheets print Enable after toner near end
NOTE: When item B is set to "0" and item D to a desired number,
printing can be made after toner near end. However, insuf-
ficient density, thin spots, or improper color balance may be
resulted depending on the using conditions. When item D
is set to "1" printing is disabled after toner near end. this
case, toner end display is made in the toner near end sta-
tus, and copy/print/FAX outputs are disabled.
ficient density, thin spots, or improper color balance may be
resulted depending on the using conditions. When item D
is set to "1" printing is disabled after toner near end. this
case, toner end display is made in the toner near end sta-
tus, and copy/print/FAX outputs are disabled.
26-71
Purpose
Setting
Function (Purpose)
Set the trial mode of the web browsing
function.
function.
Section
Operation/Procedure
1)
Enter the set value with 10-key.
2)
Press [OK] key.
26-73
Purpose
Setting
Function (Purpose)
Enlargement continuous shoot, A3 wide
copy mode image loss (shade delete quan-
tity) adjustment.
copy mode image loss (shade delete quan-
tity) adjustment.
Section
Operation/Procedure
1)
Select an item to be set with scroll key.
2)
Enter the set value with 10-key.
3)
Press [OK] key.
When the adjustment value is increased, the image loss
(shade delete quantity) is increased.
(shade delete quantity) is increased.
26-74
Purpose
Setting
Function (Purpose)
Set the OSA trial mode.
Section
Operation/Procedure
1)
Enter the set value with 10-key.
2)
Press [OK] key.
26-78
Purpose
Setting
Function (Purpose)
Set the password of the remote operation
panel mode.
panel mode.
Section
Operation/Procedure
1)
Enter a password with 10-key. (5 - 8 digits)
The entered password is displayed on the column of "NEW”.
In order to correct the entered password, press the [clear] key
to delete the entered value one digit by one digit.
to delete the entered value one digit by one digit.
2)
Press [SET] key.
26-79
Purpose
Setting
Function (Purpose)
Set YES/NO of the popup display of user
data delete result.
data delete result.
Section
Operation/Procedure
1)
Enter the set value with 10-key.
2)
Press [OK] key.
27
27-1
Purpose
Setting
Function (Purpose)
Set non-detection of communication error
(U7-00) with RIC. (FSS function)
(U7-00) with RIC. (FSS function)
Section
Operation/Procedure
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The set value in step 1) is saved.
Item/Display
Content
Setting
range
Default
value
A
WEB
BROWSING
TRIAL MODE
BROWSING
TRIAL MODE
0
Web browsing trial
mode setting
mode setting
0 - 1
1
1
Web browsing trial
mode canceling
mode canceling
Item/Display
Content
Setting
range
Default value
A
DELETING
SHADOW ADJ
(M)
SHADOW ADJ
(M)
Rear frame side
image loss quantity
(shade delete
quantity) adjustment
image loss quantity
(shade delete
quantity) adjustment
0 - 50
0
(Adjustment
amount:
0.1mm/step)
B
DELETING
SHADOW ADJ
(S)
SHADOW ADJ
(S)
Lead edge image
loss quantity (shade
delete quantity)
adjustment
loss quantity (shade
delete quantity)
adjustment
0 - 50
0
(Adjustment
amount:
0.1mm/step)
Item/Display
Content
Setting
range
Default
value
A
OSA TRIAL
MODE
(0: YES 1: NO)
MODE
(0: YES 1: NO)
0
Used to set the
OSA trial mode.
OSA trial mode.
0 - 1
1
1
OSA trial mode is
canceled.
canceled.
Item/Display
Content
Setting
range
Default
value
A
DISP SET
0
User data delete
result popup display
OFF
result popup display
OFF
0 - 1
0
1
User data delete
result popup display
ON
result popup display
ON
0
Not detection
1
Detection
MX-M565N SIMULATION 5 – 28
27-2
Purpose
Setting
Function (Purpose)
Set the sender's registration number and
the HOST server telephone number. (FSS
function)
the HOST server telephone number. (FSS
function)
Section
Operation/Procedure
1)
Select an item to be set with touch panel.
[USER FAX NO] [SERVA TEL NO]
[USER FAX NO] [SERVA TEL NO]
2)
Enter the set value with 10-key.
3)
Press [SET] key.
The set value in step 2) is saved.
27-4
Purpose
Setting
Function (Purpose)
Set the initial call and toner order auto
send. (FSS function)
send. (FSS function)
Section
Operation/Procedure
1)
Select an item to be set with scroll keys.
2)
Enter the set value with 10-key.
3)
Press [OK] key.
The set value in step 2) is saved.
27-5
Purpose
Setting
Function (Purpose)
Set the machine tag No.
(FSS function)
(FSS function)
Section
Operation/Procedure
1)
Enter the password (max. 8 digits) with 10-key.
The entered password is displayed on the column of "NEW”. In
order to correct the entered password, press the [clear] key to
delete the entered value one digit by one digit.
order to correct the entered password, press the [clear] key to
delete the entered value one digit by one digit.
2)
Press [SET] key.
27-6
Purpose
Setting
Function (Purpose)
Set of the manual service call. (FSS func-
tion)
tion)
Section
Operation/Procedure
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The set value in step 1) is saved.
27-7
Purpose
Setting
Function (Purpose)
Set of the enable, alert call out. (FSS func-
tion)
tion)
Section
Operation/Procedure
1)
Select an item to be set with scroll keys.
2)
Enter the set value with 10-key.
3)
Press [OK] key.
The set value in step 2) is saved.
*1 The FSS function setting can be changed only from Disable to
Enable. (Cannot be changed from Enable to Disable.)
Enable. (Cannot be changed from Enable to Disable.)
*2 Alert send timing
USER FAX_NO.
Sender registration number (Max. 16 digits)
SERVA TEL_NO.
Host server telephone number (Max. 16 digits)
If the connection process is not completed normally
when registering the FSS, calling to the HOST may
be continuously made every time when the power is
turned ON (from OFF) or rebooted.
In this case, enter "********" to inhibit calling to the
HOST.
If the connection process is not completed normally
when registering the FSS, calling to the HOST may
be continuously made every time when the power is
turned ON (from OFF) or rebooted.
In this case, enter "********" to inhibit calling to the
HOST.
Item/Display
Content
Default
value
A
FSS MODE
0
Exclusive for send in
NE-B mode
NE-B mode
1
1
Send/Receive in NE-B
mode
mode
2
Exclusive for send in
NE-F mode
NE-F mode
3
Send/Receive in NE-F
mode
mode
B
RETRY_BUSY
0 - 15
Resend number setting
when busy
when busy
2
C
TIMER (MINUTE)
_BUSY
_BUSY
1 - 15
Resend timer setting
(minute) when busy
(minute) when busy
3
D
RETRY_ERROR
0 - 15
Resend number setting
when error
when error
1
E
TIMER (MINUTE)
_ERROR
_ERROR
1 - 15
Resend timer setting
(minute) when error
(minute) when error
1
F
FAX RETRY
0 - 15
Toner order auto send
timing setting (K)
timing setting (K)
2
G
TONER ORDER
TIMING
TIMING
0
Empty
11
1
Near end
2
5%
3
10%
4
15%
5
20%
6
25%
7
30%
8
35%
9
40%
10
45%
11
50%
H
TEMP HISTORY
CYCLE
CYCLE
1 -
1440
1440
Frequency of acquiring
the temperature and
humidity history (Minute)
the temperature and
humidity history (Minute)
60
I
LOG OUTPUT
CAPACITY
CAPACITY
0 - 50
Log output capacity (KB)
30
J
TONER ORDER
TIMING CONTROL
TIMING CONTROL
0
Toner order alert send at
the fixed toner remaining
quantity
the fixed toner remaining
quantity
0
1
Toner under alert send
when presuming the
toner consumption
when presuming the
toner consumption
K
TONER ORDER
DELIVERY
SETTING
DELIVERY
SETTING
0
Toner order delivery
setting OFF
setting OFF
0
1
Toner order delivery
setting ON
setting ON
L
TONER ORDER
DELIVERY
INTERVAL
DELIVERY
INTERVAL
1 - 15
Toner order delivery
setting delivery threshold
setting (DATE)
setting delivery threshold
setting (DATE)
3
0
Allow (Default)
1
Inhibit
A
FSS
FUNCTION
FUNCTION
0
FSS function enable
1
FSS function disable (*1) (Default)
B
ALERT
0
Alert call enable (*2) (Default)
1
Alert call disable
C
CONNECTION
0
FAX connection enable
1
E-MAIL connection enable
No alert cause
Initial state / Trouble / Continuous JAM alert
Maintenance
When the maintenance timing is reached.
Service call
When pressing Service call.
Item/Display
Content
Default
value
MX-M565N SIMULATION 5 – 29
27-9
Purpose
Setting
Function (Purpose)
Set the paper transport time recording
YES/NO threshold value and shading gain
adjustment retry number.
(FSS function)
YES/NO threshold value and shading gain
adjustment retry number.
(FSS function)
Section
Operation/Procedure
1)
Select an item to be set with scroll keys.
2)
Enter the set value with 10-key.
3)
Press [OK] key.
The set value in step 2) is saved.
* Items A, B: 0%, standard passing time between sheets of paper;
100%, time for judgment as a jam between sheets of paper.
* Item C: Because of a trouble in shading operation, the number of
retry is actually not registered.
27-10
Purpose
Data clear/Reset
Function (Purpose)
Clear the trouble prediction history informa-
tion. (FSS function)
tion. (FSS function)
Section
Operation/Procedure
1)
Press [EXECUTE] key.
2)
Press [YES] key.
The history information of trouble prediction is cleared.
27-11
Purpose
Information display
Function (Purpose)
Check the serial communication retry num-
ber and the scanner gain adjustment retry
number history. (FSS function)
ber and the scanner gain adjustment retry
number history. (FSS function)
Section
Operation/Procedure
The serial communication retry number history and the scanner
gain adjustment retry number history are displayed.
gain adjustment retry number history are displayed.
27-12
Purpose
Information display
Function (Purpose)
Check the high-density and the half-tone
process control error history. (FSS Func-
tion)
process control error history. (FSS Func-
tion)
Section
Operation/Procedure
The high density and the half-tone process control error history are
displayed.
displayed.
27-13
Purpose
Information display
Function (Purpose)
Check the history of paper transport time
between sensors. (FSS function)
between sensors. (FSS function)
Section
Operation/Procedure
Change the display with scroll key.
Toner send request
When the toner order automatic send setting is
reached.
reached.
Toner collection request
Revision of the toner installation date (only for
a new product)
a new product)
Alert resend
A
FEED TIME 1
0 - 100
Threshold value of the paper
transport time between sensors
(Main unit) (50: Default)
transport time between sensors
(Main unit) (50: Default)
B
FEED TIME 2
0 - 100
Threshold value of the paper
transport time between sensors
(DSPF/RSPF) (50: Default)
transport time between sensors
(DSPF/RSPF) (50: Default)
C
GAIN ADJUSTMENT
RETRY
RETRY
0 - 20
Threshold value of the gain
adjustment retry number
(11: Default)
adjustment retry number
(11: Default)
D
JAM ALERT
1 - 100
Alert judgment threshold value for
occurrence of continuous jams
Alert judgment threshold value for
occurrence of continuous jams
(Setting of the number of times of
continuous jams as the alert for
continuous jams) (Default: 10
times)
occurrence of continuous jams
Alert judgment threshold value for
occurrence of continuous jams
(Setting of the number of times of
continuous jams as the alert for
continuous jams) (Default: 10
times)
E
JAM ALERT
PERIOD
PERIOD
0 - 99
Continuous JAM alert period
setting (Default: 30days)
setting (Default: 30days)
Target history
Serial communication retry number history
High density process control error history
Half tone process control error history
Scanner gain adjustment retry history
DSPF gain adjustment retry history (DSPF model only)
Paper transport time between sensors
Display Item
Content
Item name
Occurrence date
(Display)
Retry
number
LSU1
99/99/99 99:99:99
8 digits
Serial
communication retry
number history
display
* For DSPF1/
communication retry
number history
display
* For DSPF1/
DSPF2, only the
DSPF model is
displayed.
DSPF model is
displayed.
LSU2
99/99/99 99:99:99
8 digits
DESK1
99/99/99 99:99:99
8 digits
DESK2
99/99/99 99:99:99
8 digits
DSPF1
99/99/99 99:99:99
8 digits
DSPF2
99/99/99 99:99:99
8 digits
FINISHER1
99/99/99 99:99:99
8 digits
FINISHER2
99/99/99 99:99:99
8 digits
SCAN GAIN ADJ1
99/99/99 99:99:99
8 digits
Scanner gain
adjustment retry
history
adjustment retry
history
SCAN GAIN ADJ2
99/99/99 99:99:99
8 digits
SCAN GAIN ADJ3
99/99/99 99:99:99
8 digits
SCAN GAIN ADJ4
99/99/99 99:99:99
8 digits
SCAN GAIN ADJ5
99/99/99 99:99:99
8 digits
DSPF GAIN ADJ1
99/99/99 99:99:99
8 digits
DSPF gain
adjustment retry
history
(Only the DSPF
model is displayed.)
adjustment retry
history
(Only the DSPF
model is displayed.)
DSPF GAIN ADJ1
99/99/99 99:99:99
8 digits
DSPF GAIN ADJ2
99/99/99 99:99:99
8 digits
DSPF GAIN ADJ3
99/99/99 99:99:99
8 digits
DSPF GAIN ADJ4
99/99/99 99:99:99
8 digits
DSPF GAIN ADJ5
99/99/99 99:99:99
8 digits
HV_ERR1
High density error history 1
HV_ERR2
High density error history 2
HV_ERR3
High density error history 3
HV_ERR4
High density error history 4
HV_ERR5
High density error history 5
H_TONE ERR1
Half tone error history 1
H_TONE ERR2
Half tone error history 2
H_TONE ERR3
Half tone error history 3
H_TONE ERR4
Half tone error history 4
H_TONE ERR5
Half tone error history 5
Item/Display
Content
Occurre
nce date
Code
betwe
en
senso
rs
Passi
ng
time
Refer
ence
passi
ng
time
Main
unit
FEED
TIME1 -
10
TIME1 -
10
History of
paper
transport time
between
sensors 1 - 10
paper
transport time
between
sensors 1 - 10
99/99/99
99:99:99
99:99:99
5
digits
5
digits
(ms)
5
digits
(ms)
SPF
FEED
TIME1 -
10
TIME1 -
10
History of
paper
transport time
between SPF
sensors 1 - 10
paper
transport time
between SPF
sensors 1 - 10
99/99/99
99:99:99
99:99:99
5
digits
5
digits
(ms)
5
digits
(ms)
MX-M565N SIMULATION 5 – 30
27-14
Purpose
Setting
Function (Purpose)
Set the FSS function connection test mode.
Section
Operation/Procedure
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The set value in step 1) is saved.
27-15
Purpose
Operation test/check
Function (Purpose)
Display the FSS connection status.
Section
Operation/Procedure
The FSS operating status is displayed.
27-16
Purpose
Setting
Function (Purpose)
Set the FSS alert send.
Section
Operation/Procedure
1)
Enter the set value with 10-key
The value for the FSS alert operation specification is set.
The value for the FSS alert operation specification is set.
2)
Press [OK] key.
27-17
Purpose
Setting
Function (Purpose)
Set the FSS paper order alert.
Section
Operation/Procedure
1)
Select an item to be set.
2)
Enter the set value with 10-key.
The value for the FSS paper order alert operation specification
is set.
The value for the FSS paper order alert operation specification
is set.
3)
Press [SET] key.
27-18
Purpose
Setting
Function (Purpose)
Clear the FSS paper feed retry counter.
Section
Operation/Procedure
1)
Select an item to be cleared.
2)
Press [EXECUTE] key..
3)
Press [YES] key.
30
30-1
Purpose
Operation test/check
Function (Purpose)
Check the operations of the sensors and
the detectors in other than the paper feed
section and the control circuits.
the detectors in other than the paper feed
section and the control circuits.
Section
Paper feed, paper reverse/transport
Operation/Procedure
The operating conditions of the sensors and detectors are dis-
played. The sensors and the detectors which are turned ON are
highlighted.
played. The sensors and the detectors which are turned ON are
highlighted.
0
Disable (Default)
1
Enable
FSS
CONNECTION
Display the FSS
connection status
connection status
0
Not operated (Default)
1
Operated
Item/Display
Content
Default
value
A
MAINTENACE
ALERT
ALERT
0
Alert send Enable
0
1
Alert send Disable
B
TONER OEDER
ALERT
ALERT
0
Alert send Enable
0
1
Alert send Disable
C
TONER CTRG
ALERT
ALERT
0
Alert send Enable
0
1
Alert send Disable
D
JAM ALERT
0
Alert send Enable
0
1
Alert send Disable
E
TROUBLE ALERT
0
Alert send Enable
0
1
Alert send Disable
F
PAPER ORDER
ALERT
ALERT
0
Alert send Enable
0
1
Alert send Disable
Item/
Display
Content
Setting
range
Defaul
t value
NOTE
PAPER
TYPE
SET
Setting of paper kind
for paper order alert
for paper order alert
0 - 2
0
0: Standard
paper and
recycled paper
1: Standard
paper only
paper only
2: Recycled
paper only
paper only
A3
Paper order num-
ber setting [Num-
ber of sheets]
ber setting [Num-
ber of sheets]
500 -
5000
5000
1250
Unit: No. of
sheets for a
box
sheets for a
box
A4
2500
B4
B5
A3:
FIRST
Paper order alert
number setting
(Number of used
sheets)
number setting
(Number of used
sheets)
500 -
10000
1000
Unit: No. of
alert sheets for
the first time
A4:
FIRST
B4:
FIRST
FIRST
B5:
FIRST
FIRST
Item/Display
Content
TRAY1
Tray1 paper feed retry counter
TRAY2
Tray2 paper feed retry counter
TRAY3
Tray3 paper feed retry counter
TRAY4
Tray4 paper feed retry counter
MFT
Manual paper feed retry counter
PPD1
Paper transport detector 1
PPD2
Paper transport detector 2
POD1
Paper exit detector 1
POD2
Paper exit detector 2
POD3
Paper exit detector 3
TFD2
Paper exit tray full detector (Face down tray)
TFD3
Paper exit tray full detector (Right paper exit tray)
SHPOS
Shifter home position sensor
DSW_R
ADU open/close detector
DSW_C
Transport cover open/close detector
DSW_F
Front cover open/close detection
TNFD
Waste toner full detector
TNBOX
Waste toner near end detection
FPFD
Fusing upper paper entry detector
DSW_C2
Transport cover open/close detector (Paper feed tray 2)
PRTPD
Paper exit tray paper detector (Right paper exit tray)
