Sharp MX-M364N / MX-565N (serv.man117) Service Manual / Technical Bulletin ▷ View online
Sharp Electronics (UK) Ltd., Technical Services Group
[Description] Upgrade of PCU-ROM (2)
No.
Item
Details
1
Main unit control
Occasionally, toner quantity jumps to 5%. This problem has been corrected.
2
Main unit control
Modification is made to be able to change the fusing temperature when using OHP
paper with Soft SW.
SIM55-1 SW19 Data 4, 5, 6
000: 0 (Default)
001: -5
010: -10
011: -15
100: 0
101: +5
110: +10
111: +15
paper with Soft SW.
SIM55-1 SW19 Data 4, 5, 6
000: 0 (Default)
001: -5
010: -10
011: -15
100: 0
101: +5
110: +10
111: +15
3
Main unit control
Improvement mode for the contamination on the back side of the paper when
using MX-FN10 has been added to Soft SW.
using MX-FN10 has been added to Soft SW.
4
Main unit control
5
Main unit control
Density reduction has been improved.
6
Main unit control
As the countermeasure for the backside contamination of the 1st page of the job
after the multiple copies, the default value to control the rotation of the fusing
roller has been changed to collect the contamination of the pressure roller to the
fusing web at the end of the job with the specified coverage rate.
SIM55-1 SW7 Data 7, 8
00 60 sec (Default)
01 0 sec
10 10 sec
11 30 sec
after the multiple copies, the default value to control the rotation of the fusing
roller has been changed to collect the contamination of the pressure roller to the
fusing web at the end of the job with the specified coverage rate.
SIM55-1 SW7 Data 7, 8
00 60 sec (Default)
01 0 sec
10 10 sec
11 30 sec
7
Main unit control
F2-64 error occasionally occurs at the time of toner replacement after Toner End.
This problem has been corrected.
This problem has been corrected.
8
Main unit control
When the machines with 4K finisher installed prints from OSA, an error message
"No output tray is allowed." is displayed in some cases. This problem has been
corrected.
"No output tray is allowed." is displayed in some cases. This problem has been
corrected.
9
Main unit control
In some cases, the supplied toner cartridge prematurely reaches the Toner End.
This problem has been corrected.
This problem has been corrected.
10 Main unit control
Toner dispersion has been improved.
Sharp Electronics (UK) Ltd., Technical Services Group
[Description] Upgrade of PCU-ROM (2)
No.
Item
Details
1
Main unit control
Occasionally, toner quantity jumps to 5%. This problem has been corrected.
2
Main unit control
Modification is made to be able to change the fusing temperature when using OHP
paper with Soft SW.
SIM55-1 SW19 Data 4, 5, 6
000: 0 (Default)
001: -5
010: -10
011: -15
100: 0
101: +5
110: +10
111: +15
paper with Soft SW.
SIM55-1 SW19 Data 4, 5, 6
000: 0 (Default)
001: -5
010: -10
011: -15
100: 0
101: +5
110: +10
111: +15
3
Main unit control
Improvement mode for the contamination on the back side of the paper when
using MX-FN10 has been added to Soft SW.
using MX-FN10 has been added to Soft SW.
4
Main unit control
5
Main unit control
Density reduction has been improved.
6
Main unit control
As the countermeasure for the backside contamination of the 1st page of the job
after the multiple copies, the default value to control the rotation of the fusing
roller has been changed to collect the contamination of the pressure roller to the
fusing web at the end of the job with the specified coverage rate.
SIM55-1 SW7 Data 7, 8
00 60 sec (Default)
01 0 sec
10 10 sec
11 30 sec
after the multiple copies, the default value to control the rotation of the fusing
roller has been changed to collect the contamination of the pressure roller to the
fusing web at the end of the job with the specified coverage rate.
SIM55-1 SW7 Data 7, 8
00 60 sec (Default)
01 0 sec
10 10 sec
11 30 sec
7
Main unit control
F2-64 error occasionally occurs at the time of toner replacement after Toner End.
This problem has been corrected.
This problem has been corrected.
8
Main unit control
When the machines with 4K finisher installed prints from OSA, an error message
"No output tray is allowed." is displayed in some cases. This problem has been
corrected.
"No output tray is allowed." is displayed in some cases. This problem has been
corrected.
9
Main unit control
In some cases, the supplied toner cartridge prematurely reaches the Toner End.
This problem has been corrected.
This problem has been corrected.
10 Main unit control
Toner dispersion has been improved.
Sharp Electronics (UK) Ltd., Technical Services Group
[Description] Upgrade of PCU-ROM (2)
No.
Item
Details
1
Main unit control
Occasionally, toner quantity jumps to 5%. This problem has been corrected.
2
Main unit control
Modification is made to be able to change the fusing temperature when using OHP
paper with Soft SW.
SIM55-1 SW19 Data 4, 5, 6
000: 0 (Default)
001: -5
010: -10
011: -15
100: 0
101: +5
110: +10
111: +15
paper with Soft SW.
SIM55-1 SW19 Data 4, 5, 6
000: 0 (Default)
001: -5
010: -10
011: -15
100: 0
101: +5
110: +10
111: +15
3
Main unit control
Improvement mode for the contamination on the back side of the paper when
using MX-FN10 has been added to Soft SW.
using MX-FN10 has been added to Soft SW.
4
Main unit control
5
Main unit control
Density reduction has been improved.
6
Main unit control
As the countermeasure for the backside contamination of the 1st page of the job
after the multiple copies, the default value to control the rotation of the fusing
roller has been changed to collect the contamination of the pressure roller to the
fusing web at the end of the job with the specified coverage rate.
SIM55-1 SW7 Data 7, 8
00 60 sec (Default)
01 0 sec
10 10 sec
11 30 sec
after the multiple copies, the default value to control the rotation of the fusing
roller has been changed to collect the contamination of the pressure roller to the
fusing web at the end of the job with the specified coverage rate.
SIM55-1 SW7 Data 7, 8
00 60 sec (Default)
01 0 sec
10 10 sec
11 30 sec
7
Main unit control
F2-64 error occasionally occurs at the time of toner replacement after Toner End.
This problem has been corrected.
This problem has been corrected.
8
Main unit control
When the machines with 4K finisher installed prints from OSA, an error message
"No output tray is allowed." is displayed in some cases. This problem has been
corrected.
"No output tray is allowed." is displayed in some cases. This problem has been
corrected.
9
Main unit control
In some cases, the supplied toner cartridge prematurely reaches the Toner End.
This problem has been corrected.
This problem has been corrected.
10 Main unit control
Toner dispersion has been improved.
Sharp Electronics (UK) Ltd., Technical Services Group
[Description] Upgrade of PCU-ROM (2)
No.
Item
Details
1
Main unit control
Occasionally, toner quantity jumps to 5%. This problem has been corrected.
2
Main unit control
Modification is made to be able to change the fusing temperature when using OHP
paper with Soft SW.
SIM55-1 SW19 Data 4, 5, 6
000: 0 (Default)
001: -5
010: -10
011: -15
100: 0
101: +5
110: +10
111: +15
paper with Soft SW.
SIM55-1 SW19 Data 4, 5, 6
000: 0 (Default)
001: -5
010: -10
011: -15
100: 0
101: +5
110: +10
111: +15
3
Main unit control
Improvement mode for the contamination on the back side of the paper when
using MX-FN10 has been added to Soft SW.
using MX-FN10 has been added to Soft SW.
4
Main unit control
5
Main unit control
Density reduction has been improved.
6
Main unit control
As the countermeasure for the backside contamination of the 1st page of the job
after the multiple copies, the default value to control the rotation of the fusing
roller has been changed to collect the contamination of the pressure roller to the
fusing web at the end of the job with the specified coverage rate.
SIM55-1 SW7 Data 7, 8
00 60 sec (Default)
01 0 sec
10 10 sec
11 30 sec
after the multiple copies, the default value to control the rotation of the fusing
roller has been changed to collect the contamination of the pressure roller to the
fusing web at the end of the job with the specified coverage rate.
SIM55-1 SW7 Data 7, 8
00 60 sec (Default)
01 0 sec
10 10 sec
11 30 sec
7
Main unit control
F2-64 error occasionally occurs at the time of toner replacement after Toner End.
This problem has been corrected.
This problem has been corrected.
8
Main unit control
When the machines with 4K finisher installed prints from OSA, an error message
"No output tray is allowed." is displayed in some cases. This problem has been
corrected.
"No output tray is allowed." is displayed in some cases. This problem has been
corrected.
9
Main unit control
In some cases, the supplied toner cartridge prematurely reaches the Toner End.
This problem has been corrected.
This problem has been corrected.
10 Main unit control
Toner dispersion has been improved.
Display