DOWNLOAD Sharp MX-M350N / MX-M350U / MX-M450N / MX-M450U (serv.man23) Service Manual ↓ Size: 9.7 MB | Pages: 127 in PDF or view online for FREE

Mount this unit to the upper paper exit tray. This
extension is needed to support large size paper.

Output sheets can either be sorted in page order
or grouped by page. Sorted sets or groups are
offset stacked for easy separation when removed.
Sorted sets can be delivered either stapled or
unstapled.

Attaches to the output outlet on the right side of
the machine.

This unit is an output sorter that has seven
receiving bins.
The bin to receive printed output can be selected
in the printer driver. Each bin can be assigned to
receive printed output by an individual person or
by groups of people so that their prints are
separated from other users making them easy to
retrieve.
When this unit is installed, any copies or facsimile
prints will be sent to the top tray and not into the
mail bins.

This paper feed unit contains an upper multi-
purpose drawer (see item (6)) and a lower drawer
which can hold a maximum of 2000 sheets of 80
g/m

2

 (20 lbs.) paper.

Up to 500 sheets of 80 g/m

2

 (20 lbs.) paper can be

loaded. Also special papers such as envelopes
(standard sizes only) and postcards can be set.

This paper feed unit contains an upper multi-
purpose drawer (see item (6)) and two lower
drawers each of which can hold a maximum of
500 sheets of 80 g/m

2

 (20 lbs.) paper.

The saddle stitch finisher can automatically place
two staples for centreline binding of paper and fold
them along the centreline.
An optional punch module is available for
installation into the finisher.

An optional duplex module must be installed for
automatic two-sided printing.

This module is basically the same as (9) above
with the addition of a manual bypass paper feed
unit.

Mounted to the paper output port of a duplex
module.

(1)

(2)

(11)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

(10)

Copy_EX.book  11 ページ  ２００６年１２月１５日　金曜日　午後２時１６分

■ Other optional equipment

●Network expansion kit (MX-NBX2)

This is required to add on the network function.
When this expansion kit is installed, the machine
can be used as a network printer.

●Network expansion kit (MX-NBX3 (with hard drive))

Required to add the network function and a hard
drive to the machine. Installing this expansion kit
allows the machine to be used as a printer and
enables use of the document filing function.

●Barcode font kit (AR-PF1)

This kit adds bar code fonts to the machine.

●Data security kit (MX-FRX6, MX-FRX6U, MX-

FRX7, MX-FRX7U)
The MX-FRX6 and MX-FRX6U are for models that
have a hard disk drive, and the MX-FRX7 and MX-
FRX7U are for models without a hard disk drive.
This kit is used to erase electronic data from the
hard disk and memory immediately after a
document is printed or transmitted.

●PS3 expansion kit (AR-PK6)

This kit provides compatibility of PostScript level 3
to the printer.

●Facsimile expansion kit (AR-FX12)

This kit is required to add fax function.

●Additional fax memory (8MB) (AR-MM9)

●Network scanner expansion kit (MX-NSX1)

This kit is required to add the network scanning
feature.
To add the network scanner function to the MX-
M350U, or MX-M450U, the network expansion kit
is required.

●Internet fax expansion kit (MX-FWX1)

This kit is required to use the Internet fax function.
To add on the Internet fax function, the network
scanner expansion kit is required. On the MX-
M350U/MX-M450U, the network expansion kit
(with hard drive) is also required.

●Application integration module (MX-AMX1)

The application integration module can be
combined with the network scanner function to
append a metadata file to a scanned image file.

●Application communication module (MX-AMX2)

This allows the machine to be linked over a network
to an external software application.

●External account module (MX-AMX3)

This is required to use an external account
application on the machine.

●Flash ROM kit (AR-PF2)

This kit contains download fonts.

Some peripheral devices cannot be installed together while others may require the installation of one or more others
to be functional. See page 8-4, "LIST OF COMBINATION OF PERIPHERAL DEVICES".
Peripheral devices are basically optional, but some are provided as standard equipment for some models.

Copy_EX.book  12 ページ  ２００６年１２月１５日　金曜日　午後２時１６分

The machine status, messages and touch keys are
displayed on the panel. The document filing*

1

,

copy, network scanner*

2

, fax*

3

, and Internet fax*

4

functions are used by switching to the screen for
the desired function. See the following page.

Use to change modes and the corresponding
display on the touch panel.
[DOCUMENT FILING] key

Press to select the document filing mode*

1

. (See

page 7-5.)
When the document filing function has not been
added, this key is the [PRINT] key. This key is
pressed to change to the print mode screen.

[IMAGE SEND] key/LINE indicator/DATA
indicator
Press to change the display to network scanner
mode*

2

, fax mode*

3

 or Internet fax mode*

4

. (See

the "Operation manual (for image send)") and
"Operation manual (for facsimile)".)

[COPY] key
Press to select the copy mode.

Print data can be received when this indicator is lit.

Lights up or blinks when print data is being
received. Also lights up or blinks when printing is
being performed.

Press to display the current job status. (See page 1-15.)

This is used to store, edit, and delete user names
and folder names for the document filing function*

1

,

and to configure the administrator settings and
printer configuration settings. (See page 7-24)

Use to enter numeric values for various settings.

This key is used in copy mode, document filing
mode*

1

, network scanner mode*

2

, fax mode*

3

, and

Internet fax mode*

4

.

This is used as a program key when using the copy
function, and to dial when using the fax function*

3

.

This key is used in copy mode, document filing
mode*

1

, network scanner mode*

2

, and fax mode*

3

 or

Internet fax mode*

4

.

Use this key to start copying in copy mode, scan a
document in network scanner mode*

2

, or scan a

document for transmission in fax mode*

3

 or Internet

fax mode*

4

.

This key is used in copy mode, document filing
mode*

1

, network scanner mode*

2

, fax mode*

3

, and

Internet fax mode*

4

. Use the key to cancel settings and

perform an operation from the initial machine state.

*1 MX-M350N/MX-M450N, or when the document filing function has been added.
*2 When the network scanner option is installed.
*3 When the fax option is installed.
*4 When the Internet fax option is installed.

LOGOUT

DOCUMENT

FILING

IMAGE SEND

COPY

JOB STATUS

SYSTEM

SETTINGS

LINE
DATA

PRINT

READY
DATA

When the document filing 
function has not been 
added.

PRINT

(1)

(2)

(3)

(4)

(5)

(6) (7)

(8)

(9)

(10)

(11)

01.fm  13 ページ  ２００７年１月１６日　火曜日　午前１０時２１分

The touch panel screens shown in this manual are
printed images, and may appear different from the
actual screens.

■ Using the touch panel

[Example 1]

Items on the touch panel
are easily selectable by
touching the key
associated with the item
with a finger. Selection
of an item will be
accompanied with a
beep tone* to confirm
the item was selected.

Also, the key area for the item will be highlighted
for visual confirmation.

* If a greyed out key is touched, double beeps will

sound.

[Example 2]

Keys which are greyed
out on any screen are
not selectable.

The confirmation beeps can be disabled using
"Keys touch sound" in the administrator setting.
(See page 10 of the administrator settings guide.)

■ Selecting a function

[Example 1]

If a key is highlighted in a
setting screen at the
time the screen appears,
the [OK] key can be
pressed to store the
selection without further
operation.

[Example 2]

A function in the special
functions screen is
selected by touching the
key so that it is
highlighted. To cancel
the selection, touch the
highlighted key once
again.

[Example 3]

A corresponding icon
representing the feature
will appear on the touch
panel and on the main
screen of the mode
selected. If this icon is
touched, the setting
screen of the function (or
a menu screen) will

appear, allowing the settings to be checked or
adjusted and the function to be cancelled easily.

JOB QUEUE

COPY

Suzuki

0666211221

003 / 000

003 / 000

010 / 000

SETS / PROG

Beep

tone

1/13

COMPLETE

Copier feature

● Dual page copy
● Job build
● Tandem copy
● Mirror image
● B/W Reverse

PER.

0

COVER

SETTING

RIGHT

BINDING

LEFT

BINDING

CANCEL

OK

OK

DUAL PAGE

COPY

TANDEM

COPY

B4
A3

A4

A4

READY TO SCAN FOR COPY.

SPECIAL MODES

2-SIDED COPY

OUTPUT

QUICK FILE

FILE

Copy_EX.book  14 ページ  ２００６年１２月１５日　金曜日　午後２時１６分