Sharp MX-M350N / MX-M350U / MX-M450N / MX-M450U (serv.man23) User Manual / Operation Manual ▷ View online
REDUCTION/ENLARGEMENT/ZOOM
4-17
4
6
Make sure that an appropriate paper size
has been selected based on the selected
ratio.
has been selected based on the selected
ratio.
Auto paper select display
7
Use the numeric keys to set the desired
number of copies.
number of copies.
Up to 999 can be set.
If you are only making a
single copy, the copy can
be made with the copy
number display showing
"0".
If you are only making a
single copy, the copy can
be made with the copy
number display showing
"0".
Use the [C] (clear) key to
cancel an entry if a mistake has been made.
8
Press the [START] key.
If you placed the original
on the document glass,
set the output to "Sort",
and pressed the
[START] key, you must
touch the [READ-END]
key after all pages of the
on the document glass,
set the output to "Sort",
and pressed the
[START] key, you must
touch the [READ-END]
key after all pages of the
original have been scanned. (Step 7 on page 4-12)
NOTE
If the auto paper select display does not appear, a
tray with the correct size of paper for the selected
ratio will not be automatically selected.
If the auto paper select display does not appear, a
tray with the correct size of paper for the selected
ratio will not be automatically selected.
To return the ratio to 100%
To return the ratio setting to 100%, touch the [COPY
RATIO] key to display the ratio menu and then touch
the [100%] key. (Steps 2 and 3 on page 4-16.)
To return the ratio setting to 100%, touch the [COPY
RATIO] key to display the ratio menu and then touch
the [100%] key. (Steps 2 and 3 on page 4-16.)
ORIGINAL
AUTO
EXPOSURE
AUTO
A4
PAPER SELECT
64%
COPY RATIO
LOGOUT
Copy_EX.book 17 ページ ２００６年１２月１５日 金曜日 午後２時１６分
REDUCTION/ENLARGEMENT/ZOOM
4-18
XY ZOOM
The XY ZOOM feature allows the horizontal and vertical copy ratios to be changed separately. The ratios can be set
from 25% to 400% in increments of 1%.
from 25% to 400% in increments of 1%.
Example: Selecting 100% for the length and 50% for the width
1
Place the original in the document feeder
tray or on the document glass. (pages 4-3
to 4-6)
tray or on the document glass. (pages 4-3
to 4-6)
2
Touch the [COPY RATIO] key.
3
Touch the [XY ZOOM] key.
4
Touch the [X] key.
The initial state of the [X]
key is selected
(highlighted), so this
step normally is not
necessary. Touch the [X]
key only if it is not
highlighted yet.
key is selected
(highlighted), so this
step normally is not
necessary. Touch the [X]
key only if it is not
highlighted yet.
5
Use the reduction, enlargement, and
ZOOM ([
ZOOM ([
], [
]) keys to change the
copy ratio in the horizontal (X) direction.
A fixed ratio key will not
become highlighted
when touched.
become highlighted
when touched.
Zoom ratios: Any ratio
from 25% to 400% can
be set in 1% increments.
from 25% to 400% can
be set in 1% increments.
Touch the [
] key to
increase the ratio, or the
[
[
] key to decrease
the ratio. (If you continue
to touch the [
]/[
] key, the ratio will change
automatically. After 3 seconds, the ratio will
change rapidly.)
change rapidly.)
6
Touch the [Y] key.
Original
Copy
NOTE
When the original is placed in the document feeder,
the ratio can be set from 25% to 200%.
When the original is placed in the document feeder,
the ratio can be set from 25% to 200%.
AUTO
100%
A4
PAPER SELECT
COPY RATIO
XY ZOOM
MENU
ZOOM
100
100
Y
X
NOTES
● Touch a reduction or enlargement key to set the
● Touch a reduction or enlargement key to set the
approximate ratio, then touch the [
] key to
increase the ratio or the [
] key to decrease the
ratio.
● Automatic changing of the ratio when a zoom key
is continuously touched can be disabled in the
administrator settings (see "Key operation setting
(prohibit key repeat)” on page 10 of the
administrator settings guide).
administrator settings (see "Key operation setting
(prohibit key repeat)” on page 10 of the
administrator settings guide).
XY ZOOM
ZOOM
50%
10
Y
64%
ZOOM
50
100
Y
X
ZOOM
50
100
Y
X
Copy_EX.book 18 ページ ２００６年１２月１５日 金曜日 午後２時１６分
REDUCTION/ENLARGEMENT/ZOOM
4-19
4
7
Use the reduction, enlargement, and
ZOOM ([
ZOOM ([
], [
]) keys to change the
copy ratio in the vertical (Y) direction.
A fixed ratio key will not
become highlighted
when touched.
become highlighted
when touched.
The zoom keys can be
used to change the ratio
from 25% to 400% in
increments of 1%.
If needed, you can touch
the [X] key once again to
readjust the X zoom.
used to change the ratio
from 25% to 400% in
increments of 1%.
If needed, you can touch
the [X] key once again to
readjust the X zoom.
8
Touch the [OK] key.
9
If needed, touch the [PAPER SELECT] key
and select the paper size.
and select the paper size.
If the AUTO PAPER
SELECT mode is on, the
appropriate copy paper
size will have been
automatically selected
based on the original
size and selected copy
ratios.
SELECT mode is on, the
appropriate copy paper
size will have been
automatically selected
based on the original
size and selected copy
ratios.
10
Select any desired copy settings such as
the exposure or number of copies, and
then press the [START] key.
the exposure or number of copies, and
then press the [START] key.
ZOOM
50%
50
70
Y
X
64%
70%
XY ZOOM
CANCEL
ZOOM
50
70
Y
A
OK
PA
400%
200%
100%
141%
0
AUTO
ORIGINAL
AUTO
EXPOSURE
PAPER SELECT
X-50% Y-70%
COPY RATIO
PLAIN
PLAIN
PLAIN
PLAIN
To cancel an X or Y zoom setting...
Touch the [XY ZOOM] key or the [CANCEL] key in
the ratio selection screen (step 3 on page 4-18 or
step 7 ).
Touch the [XY ZOOM] key or the [CANCEL] key in
the ratio selection screen (step 3 on page 4-18 or
step 7 ).
04.fm 19 ページ ２００６年１２月１９日 火曜日 午後９時３０分
4-20
SPECIAL PAPERS
The tray 2 and the bypass tray on the optional duplex module with bypass tray can be used to make copies on
transparencies, postcards, label sheets, envelopes*
transparencies, postcards, label sheets, envelopes*
1
, and plain paper.
*1 Envelopes can be placed in the tray 2.
1
Place the original in the document feeder
tray or on the document glass. (pages 4-3
to 4-6)
tray or on the document glass. (pages 4-3
to 4-6)
2
Load the special paper in the bypass tray.
Place the paper with the
printed side face down.
See page 2-3 for the
specifications of paper
that can be used in the
bypass tray.
For the paper loading
instructions, see
"Loading paper in the
bypass tray" (page 3-3).
printed side face down.
See page 2-3 for the
specifications of paper
that can be used in the
bypass tray.
For the paper loading
instructions, see
"Loading paper in the
bypass tray" (page 3-3).
3
Touch the [PAPER SELECT] key.
4
Set the type and size of paper loaded in the
bypass tray.
bypass tray.
(1)The (X) key shows
the currently selected
paper type.
paper type.
(2)The (Y) key shows
the size of paper
loaded in the bypass
tray.
loaded in the bypass
tray.
(3)To change the displayed paper type, touch the
(X) key before touching the (Y) key. When
loading paper, if you changed the paper size
from an AB size to an inch size (or from an inch
size to an AB size), or if you changed the paper
type, be sure to change the paper type and size
settings as explained in steps 5 to 6 on page 2-
5, and steps 7 to 10 on page 2-6.
loading paper, if you changed the paper size
from an AB size to an inch size (or from an inch
size to an AB size), or if you changed the paper
type, be sure to change the paper type and size
settings as explained in steps 5 to 6 on page 2-
5, and steps 7 to 10 on page 2-6.
5
Select the bypass tray.
6
Select any desired copy settings such as
the exposure or number of copies, and
then press the [START] key.
the exposure or number of copies, and
then press the [START] key.
When copying from the
document glass in the
sort mode using the
[START] key, touch the
[READ-END] key after
all originals have been
scanned (step 7 on page
4-12).
document glass in the
sort mode using the
[START] key, touch the
[READ-END] key after
all originals have been
scanned (step 7 on page
4-12).
AUTO
AUTO
100%
A4
PAPER SELECT
COPY
EXPOSURE
4
(X)
(Y)
READY TO SCAN FOR COPY
PLAIN
A4
A4
A4
B4
B4
P
P
P
P
READY TO SCAN FOR COPY
PLAIN
A4
B4
B4
P
P
P
P
A4
A4
Copy_EX.book 20 ページ ２００６年１２月１５日 金曜日 午後２時１６分
Click on the first or last page to see other MX-M350N / MX-M350U / MX-M450N / MX-M450U (serv.man23) service manuals if exist.