Sharp MX-M310 / MX-M310N (serv.man9) User Manual / Operation Manual ▷ View online
4
ABOUT THE SOFTWARE
Disc 2
Software for Windows
• PC-Fax driver
This enables you to send a file from your computer as a fax using the same procedure as
when printing the file. (When the fax option is installed.)
when printing the file. (When the fax option is installed.)
☞
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER (page 9)
• Online manual (for network printer)
Manual in PDF format that are viewed using Adobe Acrobat Reader.
To view online manual, specify the path as follows (where "R" represents the letter of your
CD-ROM drive):
R:\Manual\EnglishA*\MXPB12.pdf
* "English A" in North America. "English" in Europe.
To view online manual, specify the path as follows (where "R" represents the letter of your
CD-ROM drive):
R:\Manual\EnglishA*\MXPB12.pdf
* "English A" in North America. "English" in Europe.
The following software can be used only when the machine is connected to a network.
• Printer Administration Utility
This allows the administrator to monitor the machine and configure machine settings from a
computer. To install and use the Printer Administration Utility, see the Readme file and the
manual in PDF format on the "Software CD-ROM" (Disc 2). The Readme file and manual are
in the following folder on the CD-ROM. (Substitute the letter of your CD-ROM drive for "R" in
the following path.)
R:\Sadmin\Documents\EnglishA*
*"EnglishA" in North America. "English" in Europe.
computer. To install and use the Printer Administration Utility, see the Readme file and the
manual in PDF format on the "Software CD-ROM" (Disc 2). The Readme file and manual are
in the following folder on the CD-ROM. (Substitute the letter of your CD-ROM drive for "R" in
the following path.)
R:\Sadmin\Documents\EnglishA*
*"EnglishA" in North America. "English" in Europe.
Software for Macintosh
• PPD file
This is the printer description file which enables the machine to be used as a PostScript 3
compatible printer. The PS3 expansion kit is required to use the machine in a Macintosh
environment.
compatible printer. The PS3 expansion kit is required to use the machine in a Macintosh
environment.
☞
MAC OS X (page 29)
☞
MAC OS 9.0 - 9.2.2 (page 35)
• Online manual (for network printer)
Manual in PDF format that are viewed using Adobe Acrobat Reader.
To view online manual, double-click the folders and files in the following order.
"Printer Manual" folder - "EnglishA"* folder - "MXPB12" icon.
* "English A" in North America. "English" in Europe.
To view online manual, double-click the folders and files in the following order.
"Printer Manual" folder - "EnglishA"* folder - "MXPB12" icon.
* "English A" in North America. "English" in Europe.
• The PS3 expansion kit is required to use the machine as a printer in a Macintosh environment. In
addition, the machine must be connected to a network. A USB connection cannot be used.
• The PC-Fax driver cannot be used in a Macintosh environment.
Setup_multi.book 4 ページ 2009年7月7日 火曜日 午後2時8分
5
ENGLISH
VERIFYING SYSTEM REQUIREMENTS
SYSTEM REQUIREMENTS
Before installing the software described in this manual, make sure that your computer satisfies the
following requirements.
following requirements.
*1 Compatible with models preinstalled with Windows 2000 Professional, Windows XP Professional,
Windows XP Home Edition, Windows 2000 Server, Windows Server 2003, Windows Vista, or
Windows Server 2008, and which are equipped standard with a USB interface.
Windows Server 2008, and which are equipped standard with a USB interface.
*2 Cannot be used when the machine is connected with a USB cable. The PC-Fax driver and scanner
driver cannot be used.
SOFTWARE REQUIREMENTS
The following requirements must be met to use the software described in this manual.
* For the types of computers and operating systems that can run the software, see "SYSTEM
REQUIREMENTS" (page 5).
Windows
Macintosh*
2
Operating system
Windows 2000 Professional, Windows XP Professional,
Windows XP Home Edition, Windows 2000 Server,
Windows Server 2003, Windows Vista, Windows Server
2008
Windows XP Home Edition, Windows 2000 Server,
Windows Server 2003, Windows Vista, Windows Server
2008
Mac OS 9.0 to 9.2.2,
Mac OS X v10.2.8,
Mac OS X v10.3.9,
Mac OS X v10.4.11,
Mac OS X v10.5 to 10.5.6
Mac OS X v10.2.8,
Mac OS X v10.3.9,
Mac OS X v10.4.11,
Mac OS X v10.5 to 10.5.6
Computer type
IBM PC/AT compatible computer
Equipped with a 10Base-T/100Base-TX/1000Base-T LAN
board or equipped standard with a USB 2.0/1.1
Equipped with a 10Base-T/100Base-TX/1000Base-T LAN
board or equipped standard with a USB 2.0/1.1
*1
port.
An environment in which
any of the operating
systems listed above can
fully operate (including
Macintosh computers with
an Intel processor).
any of the operating
systems listed above can
fully operate (including
Macintosh computers with
an Intel processor).
Display
1024 x 768 dots resolution and 16-bit color or higher is
recommended.
recommended.
Other hardware
requirements
requirements
An environment that allows any of the above operating
systems to fully operate.
systems to fully operate.
For users of Windows NT 4.0/2000/XP/Server 2003/Vista/Server 2008
To perform the procedures described in this manual such as installing the software and configuring
settings after installation, administrator authority is required.
To perform the procedures described in this manual such as installing the software and configuring
settings after installation, administrator authority is required.
Operating system
environment*
Software
Required expansion kits
Type of connection*
Windows
PCL6 printer driver,
PCL5c printer driver
PCL5c printer driver
Can be used in the standard
configuration.
configuration.
Network/ USB
PS printer driver,
PPD driver
PPD driver
PS3 expansion kit
PC-Fax driver
Facsimile expansion kit
Printer Status Monitor
Can be used in the standard
configuration.
configuration.
Network only (cannot be
used with a USB
connection)
used with a USB
connection)
Printer Administration Utility
Macintosh
Macintosh PPD file
PS3 expansion kit
Note
Setup_multi.book 5 ページ 2009年7月7日 火曜日 午後2時8分
6
CONNECTING THE MACHINE
CONNECTING TO A NETWORK
To connect the machine to a network, connect the LAN cable to the machine's network connector.
Use a shielded LAN cable.
Use a shielded LAN cable.
After connecting the machine to a network, be sure to configure the IP address and other network
settings before installing the software. (The factory default setting for the IP address is to receive the
IP address automatically when the machine is used in a DHCP environment.)
Network settings can be configured using "Network Settings" in the administrator settings on the
machine.
settings before installing the software. (The factory default setting for the IP address is to receive the
IP address automatically when the machine is used in a DHCP environment.)
Network settings can be configured using "Network Settings" in the administrator settings on the
machine.
X Checking the IP address of the machine
You can check the IP address of the machine by printing out the "PRINTER SETTINGS LIST" in the
system settings. Follow these steps to print out the "PRINTER SETTINGS LIST".
Press the [SYSTEM SETTINGS] key, touch the [LIST PRINT] key, touch the [PRINTER TEST PAGE]
key, and then touch the [PRINTER SETTINGS LIST] key.
system settings. Follow these steps to print out the "PRINTER SETTINGS LIST".
Press the [SYSTEM SETTINGS] key, touch the [LIST PRINT] key, touch the [PRINTER TEST PAGE]
key, and then touch the [PRINTER SETTINGS LIST] key.
CONNECTING THE MACHINE WITH A USB
CABLE (Windows)
CABLE (Windows)
The machine can be connected to a computer using a USB cable if the computer is a Windows
computer. (The USB interface on the machine cannot be used in a Macintosh environment.)
The machine and computer must be connected when a message appears during installation of the
printer driver. If a USB cable is connected before the printer driver is installed, the printer driver will not
be installed correctly. For the procedure for connecting a USB cable, see "WHEN THE MACHINE
WILL BE CONNECTED WITH A USB CABLE" (page 17).
computer. (The USB interface on the machine cannot be used in a Macintosh environment.)
The machine and computer must be connected when a message appears during installation of the
printer driver. If a USB cable is connected before the printer driver is installed, the printer driver will not
be installed correctly. For the procedure for connecting a USB cable, see "WHEN THE MACHINE
WILL BE CONNECTED WITH A USB CABLE" (page 17).
• If the machine is used in a DHCP environment, the IP address of the machine may change. If this
happens, printing will not be possible. This problem can be avoided by using a WINS server or by
assigning a permanent IP address to the machine.
assigning a permanent IP address to the machine.
• This manual explains how to set up the software in a Windows network environment and in a
Macintosh network environment.
Caution
Setup_multi.book 6 ページ 2009年7月7日 火曜日 午後2時8分
7
7
ENGLISH
This section explains how to install the software and configure settings so that the printer function of
the machine can be used with a Windows computer.
the machine can be used with a Windows computer.
OPENING THE SOFTWARE SELECTION
SCREEN (FOR ALL SOFTWARE)
SCREEN (FOR ALL SOFTWARE)
1
Insert the "Software CD-ROM"
into your computer's CD-ROM
drive.
into your computer's CD-ROM
drive.
• If you are installing the printer driver or
printer status monitor, insert the
"Software CD-ROM" that shows "Disc 1"
on the front of the CD-ROM.
"Software CD-ROM" that shows "Disc 1"
on the front of the CD-ROM.
• If you are installing the PC-Fax driver or
scanner driver, insert the "Software
CD-ROM" that shows "Disc 2" on the
front of the CD-ROM.
CD-ROM" that shows "Disc 2" on the
front of the CD-ROM.
2
Click the [Start] button (
), click
[Computer], and then
double-click the [CD-ROM] icon
(
double-click the [CD-ROM] icon
(
).
• In Windows XP/Server 2003, click the
[start] button, click [My Computer], and
then double-click the [CD-ROM] icon.
then double-click the [CD-ROM] icon.
• In Windows 2000, double-click [My
Computer] and then double-click the
[CD-ROM] icon.
[CD-ROM] icon.
3
Double-click the [Setup] icon
(
(
).
4
The "SOFTWARE LICENSE"
window will appear. Make sure
that you understand the
contents of the license
agreement and then click the
[Yes] button.
window will appear. Make sure
that you understand the
contents of the license
agreement and then click the
[Yes] button.
5
Read the message in the
"Welcome" window and then
click the [Next] button.
"Welcome" window and then
click the [Next] button.
In Windows Vista/Server 2008, if a
message screen appears asking you
for confirmation, click [Allow].
message screen appears asking you
for confirmation, click [Allow].
Note
You can show the "SOFTWARE
LICENSE" in a different language by
selecting the desired language from
the language menu. To install the
software in the selected language,
continue the installation with that
language selected.
LICENSE" in a different language by
selecting the desired language from
the language menu. To install the
software in the selected language,
continue the installation with that
language selected.
Note
SETUP IN A WINDOWS ENVIRONMENT
Setup_multi.book 7 ページ 2009年7月7日 火曜日 午後2時8分
Click on the first or last page to see other MX-M310 / MX-M310N (serv.man9) service manuals if exist.