DOWNLOAD Sharp MX-M310 / MX-M310N (serv.man5) Service Manual ↓ Size: 6.6 MB | Pages: 39 in PDF or view online for FREE

Model
MX-M310 MX-M310N (serv.man5)
Pages
39
Size
6.6 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Installation Manual.
File
mx-m310-mx-m310n-sm5.pdf
Date

Sharp MX-M310 / MX-M310N (serv.man5) Service Manual ▷ View online

Parts marked with “
” are important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
CONTENTS
 
INSTALLATION MANUAL
CODE: 00ZMXM310/I1E
DIGITAL MULTIFUNCTIONAL 
SYSTEM
MX-M260/M310
MODEL
MX-M260N/M310N
[1]
MX-M260/M260N/M310/M310N (Main unit) . . . . . . . . . . . . . . . . . .  1-1
[2]
MX-RP10 (Reversing single pass feeder) . . . . . . . . . . . . . . . . . . . .  2-1
[3]
MX-DE10/DE11 (Paper feed unit) . . . . . . . . . . . . . . . . . . . . . . . . . .  3-1
[4]
MX-DS11/DS12 (Machine stand) . . . . . . . . . . . . . . . . . . . . . . . . . .  4-1
[5]
MX-FN13 (Finisher). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-1
[6]
MX-TE10 (Paper exit tray)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-1
[7]
MX-TR11 (Job separator tray). . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-1
[8]
MX-PB12 (Printer expansion kit) . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-1
[9]
AR-SM5/SM6 (256MB Expansion memory board/
512MB Expansion memory board) . . . . . . . . . . . . . . . . . . . . . . . . .  9-1
[10] MX-PK10 (PS3 Expansion kit)  . . . . . . . . . . . . . . . . . . . . . . . . . . .  10-1
[11] AR-PF1/PF2 (Barcode font kit/Macro font flash ROM kit) . . . . . . .  11-1
[12] MX-NSX1 (Network scanner expansion kit)  . . . . . . . . . . . . . . . . .  12-1
[13] AR-FX7 (Facsimile expansion kit) . . . . . . . . . . . . . . . . . . . . . . . . .  13-1
[14] MX-FR17U/FR18U (Data security kit). . . . . . . . . . . . . . . . . . . . . .  14-1
[15] MX-AMX1 (Application integration module)  . . . . . . . . . . . . . . . . .  15-1
MX-M260/M310/M260N/M310N MX-M260/M260N/M310/M310N (Main unit) 1 - 1
[1] MX-M260/M260N/M310/M310N (Main unit)
1. Installation
A. Environment
The performance of this machine is affected by the environment of the
installing site. Avoid installation to the following places:
• Avoid installation in direct sunlight, otherwise the plastic parts may
be deformed.
• Avoid installation in a place of high temperature, high humidity, low
temperature or low humidity, otherwise paper may be dampened and
frost may be generated in the machine to cause a paper jam and
dirty copy.
• Avoid installation in a dusty place, otherwise dust may enter the
machine to cause dirty copy or machine troubles.
• Avoid installation to a place with much vibration, otherwise the
machine may cause troubles.
• Avoid installation to a place of poor ventilation.
• Avoid installation to a place where there is ammonium gas.
Installation near a diazo-copier may lead to dirty copy.
• Be sure to have enough space around the machine.
Be sure to allow the required space around the machine for servicing
and proper ventilation.
B. Power source
• Check that the following power capacity is satisfied. If not, addition-
ally provide a power source.
Current capacity
100V : 12A or more
120V±10% : 15A
200V : 8A or more
• Install the machine near the power outlet to facilitate connection of
the power plug.
• If the power plug of this machine and other illuminating apparatus
are connected to the same power outlet, the lamp may flicker. Use
an exclusive power outlet for this machine without connecting
another lamp together.
• Avoid complex wiring. Be careful not to damage, break, or process
the power cord.
• Earth wire connection
Be sure to connect the earth wire for protection against danger.
If not, improper grounding may cause a fire or an electric shock.
12" (30cm)
12"
(30cm)
12"
(30cm)
Earth terminal
MX-M260/M310/M260N/M310N MX-M260/M260N/M310/M310N (Main unit) 1 - 2
C. Transport
• When transporting the machine, use two people to lift the machine
using the two grips provided on each side of the machine.
D. Other precautions
• If the machine produces smoke or bad smell, stop the operation of
the machine.
• Do not use flammable spray near the machine.
• Do not remove the cabinet of the machine.
• Do not put a receptacle with water in it or metal pieces, which may
drop inside the machine, causing a trouble.
• When it thunders, turn off the power and disconnect the power plug
from the power outlet to prevent against an electric shock or a fire
caused by lighting damage.
• If a piece of metal or water enters the machine, turn off the power
and disconnect the power plug from the power outlet.
• Do not touch the power plug with a wet hand.
• Do not remodel the machine.
• Be careful not to pinch your fingers when closing the front cover or
the side cover and setting the paper feed tray to supply paper or pro-
cess a paper jam.
• When disconnecting the power plug from the power outlet, do not
pull the cord.
• Do not throw toner or the toner cartridge into a fire.
• Keep toner or the toner cartridge away from the children.
• When the exclusive table (option) is used, be sure to use the adjust-
ers (4 pcs.) on the floor.
When it is required to move the machine for rearrangement of the
office, etc., release the adjuster locks and move the machine.
• The fusing section is heated to a high temperature.
When removing a paper jam, be careful not to touch the fusing sec-
tion.
• When the machine is not used for a long time, disconnect the power
plug from the power outlet for safety.
• When transporting the machine, turn off the power and disconnect
the power plug from the power outlet. (Remove the earth wire after
disconnecting the power plug from the power outlet.)
2. Removal of protective material and fixing 
screw
1) Remove all tapes, then open the document cover and remove the
protective material of sheet shape.
2) Use a screwdriver to remove the fixing screw.
The fixing screw is required when transporting the machine. Keep
it in the tray. (Refer to the later description.)
Adjuster
Lock
Release
Fusing section
MX-M260/M310/M260N/M310N MX-M260/M260N/M310/M310N (Main unit) 1 - 3
3. Removal and storage of fixing pin
1) Lift the knob and gently pull out the tray.
2) Hold the paper pressure plate and turn the fixing pin in the arrow
direction.
3) Store the removed fixing pin and the fixing screw which was
removed in the above procedure, together in the specified storage
place in the tray.
∗ If power is turned don without removing the fixing pin, it will be diffi-
cult to pull out the tray.
4. Developer supply
1) Hold the both sides of the front cover, and pull down to open it.
2) Loosen the blue screw and pull out the developing unit.
3) Remove the cover from the developer unit.
4) Rotate the MG roller in the arrow direction and supply developer
evenly into the developing unit.
∗ Shake the developer bag well before opening it.
∗ Check that the DV seal is free from developer. If developer is
attached to the DV seal, clean and remove it.
5) After supplying developer into the developer unit, do not tilt or
shake the developer unit.
6) Attach the developer unit to the copier, and fix it with the screw.
5. Toner cartridge installation
1) Shake it about 4 - 5 times horizontally.
2) Press the lock release lever, and insert the unit completely into the
copier along the guide groove.
∗ Dirt or dust must be removed from the toner cartridge before
installing.
Fixing pin
Fixing screw
MG roller
Page of 39
Display

Sharp MX-M310 / MX-M310N (serv.man5) Service Manual ▷ Download

  • DOWNLOAD Sharp MX-M310 / MX-M310N (serv.man5) Service Manual ↓ Size: 6.6 MB | Pages: 39 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp MX-M310 / MX-M310N (serv.man5) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp MX-M310 / MX-M310N (serv.man5) Copying Equipment. Information contained in Sharp MX-M310 / MX-M310N (serv.man5) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.