Sharp MX-M310 / MX-M310N (serv.man41) Service Manual / Technical Bulletin ▷ View online
Sharp Electronics (UK) Ltd., Document Systems Support
1/3
TECHNICAL BULLETIN
Date:
3
rd
December 2012
Model:
See below
Ref.:
DCE875
Colour:
White
Page:
1 of 3
PAY EXTRA ATTENTION TO NOTES WHEN
INSTALLING CARTRIDGE GUIDE AS
(NOTES AT THE TIME OF SERVICE MAINTENANCE)
1. Model Name: MX-M264N/M314N/M354N/M264U/M314U/M354U,
MX-M260/M260N/M310/M310N
AR-5618/5618D/5618N/5618S/5620/5620D/5620N/5620S/5623/5623D/5623DA/5623N
MX-M182/M182D/M202D/M232D,
MX-M181D/M211D,
MX-M160/M160D/M200D
2. General:
When installing the cartridge guide AS at the time of service maintenance, if it is installed
in the condition that the DV blade gets caught, it may lead to the toner dispersion or the
leakage of the developer. Please pay an extra attention to the notes when installing the
cartridge guide AS to the DV unit.
When installing the cartridge guide AS to the DV unit, please set 2 sections of the
hooks first, and then install it to DV blade side. Please note that the DV blade is
very easy to be deformed so the special attention is required. In addition to the
condition that the DV blade gets caught, please be careful not to deform it by
grasping with your hands when handling DV unit.
For your information, the installation procedure of the cartridge guide AS is separately
attached so please refer to it.
- State of the DV blade after installing the cartridge guide AS:
DV blade is fine.
DV blade gets caught.
Sharp Electronics (UK) Ltd., Document Systems Support
2/3
- How to install the cartridge guide AS
When installing the cartridge guide AS, please pay careful attention to the notes:
(For MX-M264N/M314N/M354N/M264U/M314U/M354U, MX-M260/M260N/M310/M310N
AR-5726/5726X/5731/5731X)
Note1) Set the hooks of DV-BOX to the squire holes of the cartridge guide AS.
Note2) Install the cartridge guide AS while rotating.
Note3) Make sure that DV blade does not get caught.
(1)
Set the hooks of DV-BOX to the
squire holes of the cartridge
guide AS (2-position)
(3)
After installing the cartridge
guide AS, make sure that DV
blade does not get caught.
(both of front/rear side)
(2)
Rotate the cartridge guide AS based on
the hooks which have been set as the
fulcrum point, and then insert the positioning
boss of the DV-BOX into the positioning
holes of the cartridge guide AS.
Sharp Electronics (UK) Ltd., Document Systems Support
3/3
(For
618/5618D/5618N/5618S/5620/5620D/5620N/5620S/5623/5623D/5623DA/5623N
AR-5620SL/5620SLX, AR-X180/X180S/X200/X200D/X230N,
MX-M182/M182D/M202D/M232D, MX-M181D/M211D, MX-M160/M160D/M200D,
AR-5516/5516X/5516S/5516SX/5516D/5516DX/5516N/5516NX
AR-5520/5520X/5520S/5520SX/5520D/5520DX/5520N/5520NX, AR-5518)
Note1) Set the hooks of DV-BOX to the squire holes of the cartridge guide AS.
Note2) Install the cartridge guide AS while rotating.
Note3) Make sure that DV blade does not get caught.
Check the hooks of DV-BOX from the
upper holes of the cartridge guide AS.
(1)
Set the hooks of DV-BOX to the
squire holes of the cartridge
guide AS (2-position)
(2)
Rotate the cartridge guide AS based on
the hooks which have been set as the
fulcrum point, and then insert the positioning
boss of the DV-BOX into the positioning
holes of the cartridge guide AS.
(3)
After installing the cartridge
guide AS, make sure that DV
blade does not get caught.
(both of front/rear side)
Display