DOWNLOAD Sharp MX-M266N / MX-M316N / MX-M356N (serv.man6) Service Manual ↓ Size: 69.03 MB | Pages: 127 in PDF or view online for FREE

Model
MX-M266N MX-M316N MX-M356N (serv.man6)
Pages
127
Size
69.03 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Service Manual (Revised June 2016).
File
mx-m266n-mx-m316n-mx-m356n-sm6.pdf
Date
PREV: Sharp MX-M266N / MX-M316N / MX-M356N (serv.man5) Service Manual

Sharp MX-M266N / MX-M316N / MX-M356N (serv.man6) Service Manual ▷ View online

MX-M316N  SIMULATION  6 – 48
 
46-19
Purpose
Setting
Function (Purpose)
Used to set the operating conditions for the
density scanning (exposure) of mono-
chrome auto copy mode documents.
Section
Operation/Procedure
Select an item to be set with touch panel.
When an item is selected, it is highlighted and the setting change is
saved.
 
46-30
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the resolution in the sub
scanning direction in the copy mode.
Section
Operation/Procedure
1)
Refer to the following table, and enter the set value corre-
sponding to the resolution mode with 10-key.
2)
Press [OK] key. (The set value is saved.)
 
46-32
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the document background
density reproducibility in the monochrome
auto copy mode.
Section
Operation/Procedure
1)
Select a target item of setting with scroll key on the touch
panel.
2)
Enter the set value with 10-key.
3)
Press [OK] key. (The set value is saved.)
When the adjustment value is increased, reproducibility of the
background and the low density image is increased. When the
adjustment value is decreased, reproducibility of the background
and the low density image is decreased.
 
46-37
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the reproduction capability
of monochrome mode color.
Section
Operation/Procedure
1)
Select a target item with scroll keys on the touch panel.
2)
Enter the set value with 10-key.
3)
Press [EXECUTE] key.
4)
Press [YES] key.
This is to adjust the reproduction capability of red and yellow
images when copying color documents with red and yellow images
in the monochrome mode.
Applied to the copy mode only.
* B-Ratio: The value of gray making setting (B) is obtained from
the formula below. 
1000-R-Ratio - G-Ratio
When [DEFAULT] key is pressed, the values are set to the initial
values (Default).
When the adjustment value of the adjustment item A is increased,
the copy density of red images is decreased. When the adjustment
value is decreased, the density is increased.
When the adjustment value of the adjustment item B is increased,
the copy density of yellow images is increased. When the adjust-
ment value is decreased, the density in also decreased.
Item/Display
Content
Set value
Default 
value
AE_MODE
Auto exposure mode
MODE1, MODE2
MODE2
AE_STOP_COPY
Auto B/W exposure 
Stop (for copy)
REALTIME/
STOP/
PRESCAN
STOP
AE_STOP_FAX
Auto B/W exposure 
Stop (for FAX)
ON/OFF
ON
AE_STOP_SCAN
Auto B/W exposure 
Stop (for scanner)
REALTIME/
STOP/
PRESCAN
STOP
AE_FILTER
Auto exposure filter 
setting
SOFT
NORMAL
NORMAL 
SHARP
AE_WIDTH
AE exposure width
FULL/PART
FULL
Item/Display
Content
Setting 
range
Default 
value
A
SCAN 
RESOLUTION 
SW
Scan resolution 
selection 
(COPY: COLOR)
Mode1
0 - 1
0
0
Mode2
1
Mode
Scan 
mode
Resolution in the sub scanning direction (DPI)
25-99% 
[Magnification 
ratio]
100-200% 
[Magnification 
ratio]
201-400% 
[Magnification 
ratio]
Mode1
OC
600
600
1200
RSPF
600
600
 - 
Mode2
OC
300
600
1200
RSPF
400
600
 - 
Item/Display
Content
Setting 
range
Default 
value
A
COPY : OC
Copy mode (for OC)
1 - 250
196
B
COPY : RSPF
Copy mode (for RSPF)
1 - 250
196
C
SCAN : OC
Scanner mode (for OC)
1 - 250
196
D
SCAN : RSPF
Scanner mode (for RSPF)
1 - 250
196
E
FAX : OC
FAX mode (for OC)
1 - 250
196
F
FAX : RSPF
FAX mode (for RSPF)
1 - 250
196
Item/Display
Content
Setting 
range
Default 
value
A
R-Ratio
Gray making setting (R)
0 - 1000
108
B
G-Ratio
Gray making setting (G)
0 - 1000
678
B-Ratio
Gray making setting (B) 
(1000-R-Ratio - G-Ratio)
MX-M316N  SIMULATION  6 – 49
 
46-39
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the sharpness of FAX send
images.
Section
Operation/Procedure
1)
Select a target item with scroll keys on the touch panel.
2)
Enter the set value with 10-key.
3)
Press [OK] key. (The set value is saved.)
Input small numeric value to obtain crispy image. Input large
numeric value to decrease moire.
 
46-40
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the FAX send image density.
(Collective adjustment of all the modes)
Section
Operation/Procedure
1)
Set the document on the document table.
2)
Enter the set value with 10-key.
3)
Press [EXECUTE] key, or [OK] key
When [EXECUTE] key is pressed, the adjustment value is set
and the scanned document image is outputted.
 
46-41
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the FAX send image density.
(Normal)
Section
Operation/Procedure
1)
Set the document on the document table.
2)
Enter the set value with 10-key.
3)
Press [EXECUTE] key, or [OK] key
When [EXECUTE] key is pressed, the adjustment value is set
and the scanned document image is outputted.
To check the adjustment density level of items A - F, set the docu-
ment and set the setting value of item G according to items A - F,
and press [EXECUTE] key.
Item/Display
Content
Setting 
range
Default 
value
A
200 x 100 [DPI] OFF
200 x 100 [DPI] 
halftone OFF
0 - 2
1
B
200 x 200 [DPI] OFF
200 x 200 [DPI] 
halftone OFF
0 - 2
1
C
200 x 200 [DPI] ON
200 x 200 [DPI] 
halftone ON
0 - 2
1
D
200 x 400 [DPI] OFF
200 x 400 [DPI] 
halftone OFF
0 - 2
1
E
200 x 400 [DPI] ON
200 x 400 [DPI] 
halftone ON
0 - 2
1
F
400 x 400 [DPI] OFF
400 x 400 [DPI] 
halftone OFF
0 - 2
1
G
400 x 400 [DPI] ON
400 x 400 [DPI] 
halftone ON
0 - 2
1
H
600 x 600 [DPI] OFF
600 x 600 [DPI] 
halftone OFF
0 - 2
1
I
600 x 600 [DPI] ON
600 x 600 [DPI] 
halftone ON
0 - 2
1
Item/Display
Content
Setting 
range
Default 
value
A
EXPOSURE 
LEVEL(ALL)
Used to adjust the FAX send 
image density. (Collective 
adjustment of all the modes)
1 - 99
50
Item/Display
Content
Setting 
range
Default 
value
A
AUTO
Auto
1 - 99
50
B
EXPOSURE1
Exposure 1
1 - 99
50
C
EXPOSURE2
Exposure 2
1 - 99
50
D
EXPOSURE3
Exposure 3
1 - 99
50
E
EXPOSURE4
Exposure 4
1 - 99
50
F
EXPOSURE5
Exposure 5
1 - 99
50
G
EXECUTE 
MODE
AUTO
Print 
mode
Auto
1 - 6
1
1 
(AUTO)
EXP1
Exposure 1
2
EXP2
Exposure 2
3
EXP3
Exposure 3
4
EXP4
Exposure 4
5
EXP5
Exposure 5
6
MX-M316N  SIMULATION  6 – 50
 
46-42
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the FAX send image density.
(Fine)
Section
Operation/Procedure
1)
Set the document on the document table.
2)
Enter the set value with 10-key.
3)
Press [EXECUTE] key, or [OK] key
When [EXECUTE] key is pressed, the adjustment value is set
and the scanned document image is outputted.
To check the adjustment density level of items A - L, set the docu-
ment and set the setting value of item M according to items A - L,
and press [EXECUTE] key.
 
46-43
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the FAX send image density.
(Super Fine)
Section
Operation/Procedure
1)
Set the document on the document table.
2)
Enter the set value with 10-key.
3)
Press [EXECUTE] key, or [OK] key
When [EXECUTE] key is pressed, the adjustment value is set
and the scanned document image is outputted.
To check the adjustment density level of items A - L, set the docu-
ment and set the setting value of item M according to items A - L,
and press [EXECUTE] key.
Item/Display
Content
Setting 
range
Default 
value
A
AUTO
Fine/Automatic
1 - 99
50
B
EXPOSURE1
Fine/Exposure 1
1 - 99
50
C
EXPOSURE2
Fine/Exposure 2
1 - 99
50
D
EXPOSURE3
Fine/Exposure 3
1 - 99
50
E
EXPOSURE4
Fine/Exposure 4
1 - 99
50
F
EXPOSURE5
Fine/Exposure 5
1 - 99
50
G
AUTO H_TONE
Fine/Automatic/
Halftone
1 - 99
50
H
EXPOSURE1 H_TONE 
Fine/Exposure 1/
Halftone
1 - 99
50
I
EXPOSURE2 H_TONE 
Fine/Exposure 2/
Halftone
1 - 99
50
J
EXPOSURE3 H_TONE
Fine/Exposure 3/
Halftone
1 - 99
50
K
EXPOSURE4 H_TONE
Fine/Exposure 4/
Halftone
1 - 99
50
L
EXPOSURE5 H_TONE
Fine/Exposure 5/
Halftone
1 - 99
50
M
EXECUTE 
MODE
AUTO
Print 
mode
Fine/Auto
1 - 
12
1
1 
(AUTO)
EXP1
Fine/
Exposure 1
2
EXP2
Fine/
Exposure 2
3
EXP3
Fine/
Exposure 3
4
EXP4
Fine/
Exposure 4
5
EXP5
Fine/
Exposure 5
6
AUTO 
H_TONE
Fine/
Automatic/
halftone
7
EXP1 
H_TONE
Fine/
Exposure 1/
Halftone
8
EXP2 
H_TONE
Fine/
Exposure 2/
Halftone
9
EXP3 
H_TONE
Fine/
Exposure 3/
Halftone
10
EXP4 
H_ONE
Fine/
Exposure 4/
Halftone
11
EXP5 
H_TONE
Fine/
Exposure 5/
Halftone
12
Item/Display
Content
Setting 
range
Default 
value
A
AUTO
Super Fine/Auto
1 - 99
50
B
EXPOSURE1
Super Fine/
Exposure 1
1 - 99
50
C
EXPOSURE2
Super Fine/
Exposure 2
1 - 99
50
D
EXPOSURE3
Super Fine/
Exposure 3
1 - 99
50
E
EXPOSURE4
Super Fine/
Exposure 4
1 - 99
50
F
EXPOSURE5
Super Fine/
Exposure 5
1 - 99
50
G
AUTO H_TONE
Super Fine/
Auto/Halftone
1 - 99
50
H
EXPOSURE1 H_TONE
Super Fine/
Exposure 1/Halftone
1 - 99
50
I
EXPOSURE2 H_TONE
Super Fine/
Exposure 2/Halftone
1 - 99
50
J
EXPOSURE3 H_TONE
Super Fine/
Exposure 3/Halftone
1 - 99
50
K
EXPOSURE4 H_TONE
Super Fine/
Exposure 4/Halftone
1 - 99
50
L
EXPOSURE5 H_TONE
Super Fine/
Exposure 5/Halftone
1 - 99
50
M
EXECUTE 
MODE
AUTO
Print 
mode
Super Fine/
Auto
1 - 
12
1
1 
(AUTO)
EXP1
Super Fine/
Exposure 1
2
EXP2
Super Fine/
Exposure 2
3
EXP3
Super Fine/
Exposure 3
4
EXP4
Super Fine/
Exposure 4
5
EXP5
Super Fine/
Exposure 5
6
AUTO 
H_TONE
Super Fine/
Auto/
Halftone
7
EXP1 
H_TONE
Super Fine/
Exposure 1/
Halftone
8
EXP2 
H_TONE
Super Fine/
Exposure 2/
Halftone
9
EXP3 
H_TONE
Super Fine/
Exposure 3/
Halftone
10
EXP4 
H_TONE
Super Fine/
Exposure 4/
Halftone
11
EXP5 
H_TONE
Super Fine/
Exposure 5/
Halftone
12
MX-M316N  SIMULATION  6 – 51
 
46-44
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the FAX send image density.
(Ultra fine)
Section
Operation/Procedure
1)
Set the document on the document table.
2)
Enter the set value with 10-key.
3)
Press [EXECUTE] key, or [OK] key
When [EXECUTE] key is pressed, the adjustment value is set
and the scanned document image is outputted.
To check the adjustment density level of items A - L, set the docu-
ment and set the setting value of item M according to items A - L,
and press [EXECUTE] key.
 
46-45
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the FAX send image density.
(600dpi).
Section
Operation/Procedure
1)
Set the document on the document table.
2)
Enter the set value with 10-key.
3)
Press [EXECUTE] key, or [OK] key
When [EXECUTE] key is pressed, the adjustment value is set
and the scanned document image is outputted.
To check the adjustment density level of items A - L, set the docu-
ment and set the setting value of item M according to items A - L,
and press [EXECUTE] key.
Item/Display
Content
Setting 
range
Default 
value
A
AUTO
Ultra Fine/Auto
1 - 99
50
B
EXPOSURE1
Ultra Fine/Exposure 1
1 - 99
50
C
EXPOSURE2
Ultra Fine/Exposure 2
1 - 99
50
D
EXPOSURE3
Ultra Fine/Exposure 3
1 - 99
50
E
EXPOSURE4
Ultra Fine/Exposure 4
1 - 99
50
F
EXPOSURE5
Ultra Fine/Exposure 5
1 - 99
50
G
AUTO H_TONE
Ultra Fine/Auto/
Halftone
1 - 99
50
H
EXPOSURE1 
H_TONE
Ultra Fine/
Exposure 1/Halftone
1 - 99
50
I
EXPOSURE2 
H_TONE
Ultra Fine/
Exposure 2/Halftone
1 - 99
50
J
EXPOSURE3 
H_TONE
Ultra Fine/
Exposure 3/Halftone
1 - 99
50
K
EXPOSURE4 
H_TONE
Ultra Fine/
Exposure 4/Halftone
1 - 99
50
L
EXPOSURE5 
H_TONE
Ultra Fine/
Exposure 5/Halftone
1 - 99
50
M
EXECUTE 
MODE
AUTO
Print 
mode
Ultra Fine/
Auto
1 - 
12
1
1 
(AUTO)
EXP1
Ultra Fine/
Exposure 1
2
EXP2
Ultra Fine/
Exposure 2
3
EXP3
Ultra Fine/
Exposure 3
4
EXP4
Ultra Fine/
Exposure 4
5
EXP5
Ultra Fine/
Exposure 5
6
AUTO 
H_TONE
Ultra Fine/
Auto/
Halftone
7
EXP1 
H_TONE
Ultra Fine/
Exposure 1/
Halftone
8
EXP2 
H_TONE
Ultra Fine/
Exposure 2/
Halftone
9
EXP3 
H_TONE
Ultra Fine/
Exposure 3/
Halftone
10
EXP4 
H_TONE
Ultra Fine/
Exposure 4/
Halftone
11
EXP5 
H_TONE
Ultra Fine/
Exposure 5/
Halftone
12
Item/Display
Content
Setting 
range
Default 
value
A
AUTO
600dpi/Auto 1
1 - 99
50
B
EXPOSURE1
600dpi/Exposure 1
1 - 99
50
C
EXPOSURE2
600dpi/Exposure 2
1 - 99
50
D
EXPOSURE3
600dpi/Exposure 3
1 - 99
50
E
EXPOSURE4
600dpi/Exposure 4
1 - 99
50
F
EXPOSURE5
600dpi/Exposure 5
1 - 99
50
G
AUTO H_TONE
600dpi/Auto/
Halftone 1
1 - 99
50
H
EXPOSURE1 H_TONE
600dpi/Exposure 1/
Halftone
1 - 99
50
I
EXPOSURE2 H_TONE
600dpi/Exposure 2/
Halftone
1 - 99
50
J
EXPOSURE3 H_TONE
600dpi/Exposure 3/
Halftone
1 - 99
50
K
EXPOSURE4 H_TONE
600dpi/Exposure 4/
Halftone
1 - 99
50
L
EXPOSURE5 H_TONE
600dpi/Exposure 5/
Halftone
1 - 99
50
M
EXECUTE 
MODE
AUTO
Print 
mode
600dpi/
Auto
1 - 
12
1
1 
(AUTO)
EXP1
600dpi/
Exposure 1
2
EXP2
600dpi/
Exposure 2
3
EXP3
600dpi/
Exposure 3
4
EXP4
600dpi/
Exposure 4
5
EXP5
600dpi/
Exposure 5
6
AUTO 
H_TONE
600dpi/
Auto/
Halftone
7
EXP1 
H_TONE
600dpi/
Exposure 
1/Halftone
8
EXP2 
H_TONE
600dpi/
Exposure 
2/Halftone
9
EXP3 
H_TONE
600dpi/
Exposure 
3/Halftone
10
EXP4 
H_TONE
600dpi/
Exposure 
4/Halftone
11
EXP5 
H_TONE
600dpi/
Exposure 
5/Halftone
12
Page of 127
Display

Sharp MX-M266N / MX-M316N / MX-M356N (serv.man6) Service Manual ▷ Download

Found More:

MX-M266N / MX-M316N / MX-M356N (serv.man6) Service Manuals

Preview DownloadPagesSize
MX-M266N MX-M316N MX-M356N (serv.man3) NOTE Service Manual for models with the V suffix. Service Manual 127 47.11 MB
MX-M266N MX-M316N MX-M356N (serv.man4) NOTE Installation Manual for models with the V suffix. Service Manual 76 26.56 MB
MX-M266N MX-M316N MX-M356N (serv.man5) Installation Manual (Revised December 2016). Service Manual 74 26.04 MB
MX-M266N MX-M316N MX-M356N (serv.man7) Circuit Diagram (Revised to include New Model MX-M356N). Service Manual 127 12.1 MB
MX-M266N MX-M316N MX-M356N (serv.man8) NOTE Parts Guide for models with the V suffix. Service Manual / Parts Guide 104 161.53 MB
MX-M266N MX-M316N MX-M356N (serv.man9) Parts Guide Includes RP19 20, TR18 HD14 15. (Revised June 2016). Service Manual / Parts Guide 121 108.49 MB
MX-M266N MX-M316N MX-M356N (serv.man10) PWB Parts Guide (Revised January 2016). Service Manual / Parts Guide 33 633.8 KB
MX-M266N MX-M316N MX-M356N (serv.man19) Change of Connector (Revision) Service Manual / Technical Bulletin 5 350.94 KB
MX-M266N MX-M316N MX-M356N (serv.man20) Change In 1st Delivery Unit Service Manual / Technical Bulletin 4 480.15 KB
MX-M266N MX-M316N MX-M356N (serv.man21) Parts Change For Productivity Improvement. Service Manual / Technical Bulletin 3 292.09 KB
MX-M266N MX-M316N MX-M356N (serv.man22) CHANGE OF QUANTITY OF FOLLOWER HOLDER FIXING SCREW. Service Manual / Technical Bulletin 2 281.77 KB
MX-M266N MX-M316N MX-M356N (serv.man23) Removal of OP harness plate. Service Manual / Technical Bulletin 2 192.1 KB
MX-M266N MX-M316N MX-M356N (serv.man24) Change of MG roller and bearing. Service Manual / Technical Bulletin 3 243.08 KB
MX-M266N MX-M316N MX-M356N (serv.man25) Disuse of Delivery cabinet support fixing screw. Service Manual / Technical Bulletin 2 210.46 KB
MX-M266N MX-M316N MX-M356N (serv.man26) CCE 1790 CHANGE OF WAVEGUIDE STICK CLEANING METHOD (Optics) Service Manual / Technical Bulletin 4 272.05 KB
MX-M266N MX-M316N MX-M356N (serv.man27) Quantity change of FD slide collar on shifter unit. Service Manual / Technical Bulletin 2 241.12 KB
MX-M266N MX-M316N MX-M356N (serv.man28) Discontinuation of Radio Wave absorbtion Sheet. Service Manual / Technical Bulletin 2 233.49 KB
MX-M266N MX-M316N MX-M356N (serv.man29) Change of cleaning blade. Service Manual / Technical Bulletin 2 143.42 KB
MX-M266N MX-M316N MX-M356N (serv.man30) Parts change for productivity improvement. Service Manual / Technical Bulletin 3 291.51 KB
MX-M266N MX-M316N MX-M356N (serv.man31) Discontinuation of side door reinforce plate. Service Manual / Technical Bulletin 3 295.96 KB
MX-M266N MX-M316N MX-M356N (serv.man32) Notes when replacing the LED PWB unit. Service Manual / Technical Bulletin 1 293.31 KB
MX-M266N MX-M316N MX-M356N (serv.man33) Parts change for productivity improvement. Service Manual / Technical Bulletin 2 275.65 KB
MX-M266N MX-M316N MX-M356N (serv.man34) Removal of touch pen holder. Service Manual / Technical Bulletin 1 176.63 KB
MX-M266N MX-M316N MX-M356N (serv.man35) Quantity change of rear cover sub fixing screw. Service Manual / Technical Bulletin 2 184.11 KB
MX-M266N MX-M316N MX-M356N (serv.man36) Change of Parts Supply. Service Manual / Technical Bulletin 2 243.87 KB
MX-M266N MX-M316N MX-M356N (serv.man37) Discontinuation of Screw. Service Manual / Technical Bulletin 2 182.39 KB
MX-M266N MX-M316N MX-M356N (serv.man38) Change of 1st Delivery Transport Follower Collar. Service Manual / Technical Bulletin 2 291.96 KB
MX-M266N MX-M316N MX-M356N (serv.man39) Change of Power Supply PWB. Service Manual / Technical Bulletin 4 275.51 KB
MX-M266N MX-M316N MX-M356N (serv.man40) Elimination of HV PWB support plate change in shape of lift fixing plate. Service Manual / Technical Bulletin 2 259.89 KB
MX-M266N MX-M316N MX-M356N (serv.man41) Change of belt idle bearing on 1st 2nd delivery unit's. Service Manual / Technical Bulletin 2 168.46 KB
MX-M266N MX-M316N MX-M356N (serv.man42) Removal of DV cover F Change in shape of cartridge guide lower. Service Manual / Technical Bulletin 3 290.37 KB
MX-M266N MX-M316N MX-M356N (serv.man43) Registration of joint plate for the stand as a service part. (DS19 20). Service Manual / Technical Bulletin 1 146.76 KB
MX-M266N MX-M316N MX-M356N (serv.man44) Parts change for productivity improvement. Service Manual / Technical Bulletin 3 311.8 KB
MX-M266N MX-M316N MX-M356N (serv.man45) Change of power supply. Service Manual / Technical Bulletin 4 274.33 KB
MX-M266N MX-M316N MX-M356N (serv.man46) Design change of paper guide at right door section. Service Manual / Technical Bulletin 5 343.3 KB
MX-M266N MX-M316N MX-M356N (serv.man47) Parts change for productivity improvement. Service Manual / Technical Bulletin 2 273.34 KB
MX-M266N MX-M316N MX-M356N (serv.man48) Change of clutch and modification of clutch related parts. Service Manual / Technical Bulletin 3 205.14 KB
MX-M266N MX-M316N MX-M356N (serv.man49) Change in material of winder pulley in scanner unit. Service Manual / Technical Bulletin 6 1009.2 KB
MX-M266N MX-M316N MX-M356N (serv.man50) Design change of paper guide inner. Service Manual / Technical Bulletin 5 354.5 KB
MX-M266N MX-M316N MX-M356N (serv.man51) Design change of right door. Service Manual / Technical Bulletin 3 255.18 KB
MX-M266N MX-M316N MX-M356N (serv.man52) Change of transport follower roller. Service Manual / Technical Bulletin 2 272.05 KB
MX-M266N MX-M316N MX-M356N (serv.man53) Change of POSD Sensor. Service Manual / Technical Bulletin 2 159.78 KB
MX-M266N MX-M316N MX-M356N (serv.man54) Change of Mylar for sealing dispersion. Service Manual / Technical Bulletin 2 143.01 KB
MX-M266N MX-M316N MX-M356N (serv.man55) Countermeasure for L4-70. Service Manual / Technical Bulletin 2 93.9 KB
MX-M266N MX-M316N MX-M356N (serv.man56) Design change of fusing rear paper detect lever. Service Manual / Technical Bulletin 2 123.99 KB
MX-M266N MX-M316N MX-M356N (serv.man57) Reinforcement of lift coupling. Service Manual / Technical Bulletin 2 83.07 KB
MX-M266N MX-M316N MX-M356N (serv.man58) Change in quantity of screw for fixing support plate. Service Manual / Technical Bulletin 2 128.37 KB
MX-M266N MX-M316N MX-M356N (serv.man59) Parts change for productivity improvement. Service Manual / Technical Bulletin 3 430.59 KB
MX-M266N MX-M316N MX-M356N (serv.man60) Change of lift up unit for common use with other models. Service Manual / Technical Bulletin 2 85.54 KB
MX-M266N MX-M316N MX-M356N (serv.man61) Change of flywheel fixing screw. Service Manual / Technical Bulletin 2 106.35 KB
MX-M266N MX-M316N MX-M356N (serv.man62) Change of cassette baseplate. Service Manual / Technical Bulletin 2 199.82 KB
MX-M266N MX-M316N MX-M356N (serv.man63) Change of Flywheel. Service Manual / Technical Bulletin 2 158.25 KB
MX-M266N MX-M316N MX-M356N (serv.man64) Disuse of cassette handle fixing screw. Service Manual / Technical Bulletin 2 150.08 KB
MX-M266N MX-M316N MX-M356N (serv.man65) Disuse of screw for right rail upper paper guide reinforce plate. Service Manual / Technical Bulletin 2 145.21 KB
MX-M266N MX-M316N MX-M356N (serv.man66) Discontinuing painting on MG spring. Service Manual / Technical Bulletin 2 91.26 KB
MX-M266N MX-M316N MX-M356N (serv.man67) Change in quantity of LSU fixing screws. Service Manual / Technical Bulletin 2 175.66 KB
MX-M266N MX-M316N MX-M356N (serv.man68) Modification of paper feed. Service Manual / Technical Bulletin 3 272.92 KB
MX-M266N MX-M316N MX-M356N (serv.man69) Changes of parts in M F paper guide. Service Manual / Technical Bulletin 3 147.3 KB
MX-M266N MX-M316N MX-M356N (serv.man70) Change in shape of lower fusing frame. Service Manual / Technical Bulletin 2 73.54 KB
MX-M266N MX-M316N MX-M356N (serv.man71) Full detect actuator manufacturer change. Service Manual / Technical Bulletin 2 106.72 KB
MX-M266N MX-M316N MX-M356N (serv.man72) Change in shape of Pin-Spring. Service Manual / Technical Bulletin 2 207.25 KB
MX-M266N MX-M316N MX-M356N (serv.man73) Design change of front inner frame. Service Manual / Technical Bulletin 2 178.03 KB
MX-M266N MX-M316N MX-M356N (serv.man74) Change of Photo Sensor. Service Manual / Technical Bulletin 2 220.32 KB
MX-M266N MX-M316N MX-M356N (serv.man75) Change in shape of transfer bearing R. Service Manual / Technical Bulletin 2 141.63 KB
MX-M266N MX-M316N MX-M356N (serv.man76) Removal of rear cabinet fixing plate. Service Manual / Technical Bulletin 2 71.83 KB
MX-M266N MX-M316N MX-M356N (serv.man77) Handling problem with locking rotation plate on manual paper feed tray. Service Manual / Technical Bulletin 2 148.5 KB
MX-M266N MX-M316N MX-M356N (serv.man78) Service parts setup - Desk Unit Field Support Parts. Service Manual / Technical Bulletin 3 283.54 KB
MX-M266N MX-M316N MX-M356N (serv.man79) Improvement of paper transport capability. Service Manual / Technical Bulletin 3 172.29 KB
MX-M266N MX-M316N MX-M356N (serv.man80) Improvement to prevent right door unit arm dislocating. Service Manual / Technical Bulletin 2 263.48 KB
MX-M266N MX-M316N MX-M356N (serv.man81) Design change of transfer high voltage spring. Service Manual / Technical Bulletin 2 87.42 KB
MX-M266N MX-M316N MX-M356N (serv.man82) Modification of TN drive cover. Service Manual / Technical Bulletin 2 136.53 KB
MX-M266N MX-M316N MX-M356N (serv.man83) Rom upgrade..(2) ICU u201v1 PCU 0202v1. Service Manual / Technical Bulletin 2 61.74 KB
MX-M266N MX-M316N MX-M356N (serv.man84) CCE 1549 COUNTERMEASURE FOR NOISE FROM RSPF Service Manual / Technical Bulletin 2 235.86 KB
MX-M266N MX-M316N MX-M356N (serv.man85) Discontinuation of E type ring on PS roller. Service Manual / Technical Bulletin 3 153.38 KB
MX-M266N MX-M316N MX-M356N (serv.man86) Discontinuation of clamp. Service Manual / Technical Bulletin 2 130.41 KB
MX-M266N MX-M316N MX-M356N (serv.man87) Change of ATC sensor harness. Service Manual / Technical Bulletin 2 244 KB
MX-M266N MX-M316N MX-M356N (serv.man88) Change in manual paper feed clutch harness. Service Manual / Technical Bulletin 2 156.62 KB
MX-M266N MX-M316N MX-M356N (serv.man89) Change in outer diameter of transfer roller collar. Service Manual / Technical Bulletin 2 136.63 KB
MX-M266N MX-M316N MX-M356N (serv.man90) Improvement in locking of MF unit. Service Manual / Technical Bulletin 2 267.3 KB
MX-M266N MX-M316N MX-M356N (serv.man91) Improvement of paper transport capability. Service Manual / Technical Bulletin 3 172.21 KB
MX-M266N MX-M316N MX-M356N (serv.man92) Design change of upper cover. Service Manual / Technical Bulletin 2 108.97 KB
MX-M266N MX-M316N MX-M356N (serv.man93) CCE 1557 CHANGE OF SILENCE MOQUETTE ON RSPF Service Manual / Technical Bulletin 2 203.99 KB
MX-M266N MX-M316N MX-M356N (serv.man94) Remedy for Dog Earing on reverse side when duplex printing. Service Manual / Technical Bulletin 2 133.39 KB
MX-M266N MX-M316N MX-M356N (serv.man95) Removal of motor fixing screw. Service Manual / Technical Bulletin 2 188.2 KB
MX-M266N MX-M316N MX-M356N (serv.man96) Change in shape of open close lock pawl. Service Manual / Technical Bulletin 3 97.28 KB
MX-M266N MX-M316N MX-M356N (serv.man97) Change of PCU PWB for productivity improvement. Service Manual / Technical Bulletin 2 452.38 KB
MX-M266N MX-M316N MX-M356N (serv.man98) Countermeasure for operation of change gate solenoid. Service Manual / Technical Bulletin 2 132.3 KB
MX-M266N MX-M316N MX-M356N (serv.man99) Modification of key interface harness. Service Manual / Technical Bulletin 2 123.13 KB
MX-M266N MX-M316N MX-M356N (serv.man100) Change in shape of tension plate R for DSPF RSPF. Service Manual / Technical Bulletin 3 217.95 KB
MX-M266N MX-M316N MX-M356N (serv.man101) Change to RSPF hinge. Service Manual / Technical Bulletin 2 62.41 KB
MX-M266N MX-M316N MX-M356N (serv.man102) Change in design of PS frame. Service Manual / Technical Bulletin 2 117.2 KB
MX-M266N MX-M316N MX-M356N (serv.man103) Remedy for toner dispersion. Service Manual / Technical Bulletin 3 392.61 KB
MX-M266N MX-M316N MX-M356N (serv.man104) Addition of discharge brush to manual feed tray. Service Manual / Technical Bulletin 3 418.18 KB
MX-M266N MX-M316N MX-M356N (serv.man105) Change in design of PS right lower guide. Service Manual / Technical Bulletin 2 156.85 KB
MX-M266N MX-M316N MX-M356N (serv.man106) Improvement in separation of paper in the paper feed unit. Service Manual / Technical Bulletin 3 188.75 KB
MX-M266N MX-M316N MX-M356N (serv.man107) Improvement in locking of MF unit. Service Manual / Technical Bulletin 2 249.1 KB
MX-M266N MX-M316N MX-M356N (serv.man108) Discontinuation of MX-HD14. Service Manual / Technical Bulletin 1 37.7 KB
MX-M266N MX-M316N MX-M356N (serv.man109) Countermeasure for noise from main drive. Service Manual / Technical Bulletin 2 93.65 KB
MX-M266N MX-M316N MX-M356N (serv.man110) Preventative measures for mismounting of cassette. Service Manual / Technical Bulletin 2 136.31 KB
MX-M266N MX-M316N MX-M356N (serv.man111) Improvement for paper feeding from manual paper feed unit. Service Manual / Technical Bulletin 2 153.65 KB
MX-M266N MX-M316N MX-M356N (serv.man112) Improvement for banding and blur. Service Manual / Technical Bulletin 2 103.08 KB
MX-M266N MX-M316N MX-M356N (serv.man113) Improvement for paper feed release lever becoming detached. Service Manual / Technical Bulletin 3 294.88 KB
MX-M266N MX-M316N MX-M356N (serv.man114) Change to fuser upper HR bearings. Service Manual / Technical Bulletin 2 65.6 KB
MX-M266N MX-M316N MX-M356N (serv.man115) PCQ (water droplet shaped marks on copies). Service Manual / Technical Bulletin 2 135.39 KB
MX-M266N MX-M316N MX-M356N (serv.man116) Design change of toner motor coupling. Service Manual / Technical Bulletin 2 391.26 KB
MX-M266N MX-M316N MX-M356N (serv.man117) COUNTERMEASURE FOR 500 CASSETTE PAPER FEED RELEASE LEVER OF MAIN UNIT COMING OFF AND CAUSING AN A5R JAM Service Manual / Technical Bulletin 3 163.48 KB
MX-M266N MX-M316N MX-M356N (serv.man118) MODIFICATION OF PS FOLLOWER COLLAR Service Manual / Technical Bulletin 2 104.9 KB
MX-M266N MX-M316N MX-M356N (serv.man119) Countermeasure for Scan Lamp Unit. Service Manual / Technical Bulletin 3 259.13 KB
MX-M266N MX-M316N MX-M356N (serv.man120) Rom upgrade..(1) ICU u200v1 PCU 0200v1. Service Manual / Technical Bulletin 1 21.31 KB
MX-M266N MX-M316N MX-M356N (serv.man121) Addition of DV cover. Service Manual / Technical Bulletin 2 140.45 KB
MX-M266N MX-M316N MX-M356N (serv.man122) Countermeasure for noise from 1st delivery gate. Service Manual / Technical Bulletin 3 246.4 KB
MX-M266N MX-M316N MX-M356N (serv.man123) Countermeasure for dog earing paper when using the Manual Feeder. Service Manual / Technical Bulletin 3 228.37 KB
MX-M266N MX-M316N MX-M356N (serv.man124) Remedy for operating sound of duplex motor. Service Manual / Technical Bulletin 2 87.67 KB
MX-M266N MX-M316N MX-M356N (serv.man125) Change in shape of Reactle (Transformer)and base plate Service Manual / Technical Bulletin 2 155.23 KB
MX-M266N MX-M316N MX-M356N (serv.man126) Starting Powder List (This list takes priority over information in Service Manuals). Service Manual / Technical Bulletin 4 66.25 KB
MX-M266N MX-M316N MX-M356N (serv.man127) Image rubbing at rear side of printed surface of paper. Service Manual / Technical Bulletin 3 126.29 KB
MX-M266N MX-M316N MX-M356N (serv.man128) CAUTION ILLUSTRATIONS ADDED TO PACKING BOX. Service Manual / Technical Bulletin 1 83.72 KB
MX-M266N MX-M316N MX-M356N (serv.man129) OPERABILITY IMPROVEMENT OF MF EXTENSION TRAY LOWER. Service Manual / Technical Bulletin 2 228.61 KB
MX-M266N MX-M316N MX-M356N (serv.man130) CHANGE OF UNDER SEPARATOR PAWL FOR PRODUCTIVITY IMPROVEMENT. Service Manual / Technical Bulletin 2 62.8 KB
MX-M266N MX-M316N MX-M356N (serv.man131) IMPROVEMENT OF HEAT RESISTANCE OF ADU ENTER EXIT PAPER ACTUATOR. Service Manual / Technical Bulletin 2 85.29 KB
MX-M266N MX-M316N MX-M356N (serv.man132) IMPROVEMENT OF HEAT RESISTANCE OF ADU ENTER EXIT PAPER ACTUATOR. Service Manual / Technical Bulletin 2 75.47 KB
MX-M266N MX-M316N MX-M356N (serv.man133) COUNTERMEASURE FOR DOUBLE FEED AND REVERSE OF B5 B5R SIZED PAPER. Service Manual / Technical Bulletin 3 277.81 KB
MX-M266N MX-M316N MX-M356N (serv.man134) Change of PCU PWB for productivity improvement. Service Manual / Technical Bulletin 2 127.57 KB
MX-M266N MX-M316N MX-M356N (serv.man135) Countermeasure for failure of change gate solenoid. Service Manual / Technical Bulletin 2 131.77 KB
MX-M266N MX-M316N MX-M356N (serv.man136) Countermeasure for noise from exteriors and manual paper feed unit when duplexing. Service Manual / Technical Bulletin 2 120.81 KB
MX-M266N MX-M316N MX-M356N (serv.man137) Discontinuance of cassette detect mylar. Service Manual / Technical Bulletin 2 80.71 KB
MX-M266N MX-M316N MX-M356N (serv.man138) Change of tray arm for colour tone integration. Service Manual / Technical Bulletin 2 156.95 KB
MX-M266N MX-M316N MX-M356N (serv.man139) Addition of a short harness due to the removal of the Reactle. Note INFORMATION ONLY AS THIS DOES NOT EFFECT EUROPEAN MACHINES. Service Manual / Technical Bulletin 2 205.69 KB
MX-M266N MX-M316N MX-M356N (serv.man140) Improvement in rotation performance of delivery guide collar. Service Manual / Technical Bulletin 2 190.77 KB
MX-M266N MX-M316N MX-M356N (serv.man141) Additional steps when attaching or removing paper exit options. Service Manual / Technical Bulletin 3 318.89 KB
MX-M266N MX-M316N MX-M356N (serv.man142) Improvement of earth spring for right door. Service Manual / Technical Bulletin 2 91.34 KB
MX-M266N MX-M316N MX-M356N (serv.man143) Countermeasure to prevent lower separation pawl falling off during paper jam removal. Service Manual / Technical Bulletin 2 89.81 KB
MX-M266N MX-M316N MX-M356N (serv.man144) Change to Manual Paper Feed Guide Sheet. Service Manual / Technical Bulletin 2 154.69 KB
MX-M266N MX-M316N MX-M356N (serv.man11) Rom upgrade for Machines fitted with DSK..(2) ICU u201v1 PCU 0202v1 Includes Technical Bulletin DCE996. For Models WITH HDD and MXFR50U DSK Option. Driver / Update 44.12 MB
MX-M266N MX-M316N MX-M356N (serv.man12) Rom upgrade..(2) ICU u201v1 PCU 0202v1 Includes Technical Bulletin DCE996. For Models WITHOUT HDD. Driver / Update 42.85 MB
MX-M266N MX-M316N MX-M356N (serv.man13) Rom upgrade..(2) ICU u201v1 PCU 0202v1 Includes Technical Bulletin DCE996. For Models WITH HDD. Driver / Update 43.69 MB
MX-M266N MX-M316N MX-M356N (serv.man14) Rom upgrade..(1) ICU u200v1 PCU 0200v1 Includes Technical Bulletin DCE960. For Models WITHOUT HDD. Driver / Update 41.32 MB
MX-M266N MX-M316N MX-M356N (serv.man15) Rom upgrade..(1) ICU u200v1 PCU 0200v1 Includes Technical Bulletin DCE960. For Models WITH HDD. Driver / Update 42.16 MB
MX-M266N MX-M316N MX-M356N (serv.man16) Initial production release firmware for models with the HDD option fitted. Driver / Update 42.11 MB
MX-M266N MX-M316N MX-M356N (serv.man17) Initial production release firmware for models without the HDD option fitted. Driver / Update 41.28 MB
MX-M266N MX-M316N MX-M356N (serv.man18) Watermark Data Version 01.00.00.00 Driver / Update 6.32 MB
MX-M266N MX-M316N MX-M356N Handy Guide. Handy Guide 52 2.32 MB
MX-M266N MX-M316N MX-M356N (serv.man2) EEPROM Programming Procedure Handy Guide 4 772.27 KB
MX-M266N MX-M316N MX-M356N (serv.man145) MSDS for MX-312GT. Regulatory Data 5 61.63 KB
MX-M266N MX-M316N MX-M356N (serv.man146) MSDS for MX-312GV. Regulatory Data 5 66.26 KB

RANDOM: