MX-M266N, MX-M316N, MX-M356N (serv.man141). Additional steps when attaching or removing paper exit options. — Sharp Copying Equipment Technical Bulletin (repair manual)

Model
MX-M266N MX-M316N MX-M356N (serv.man141)
Pages
3 Few pages! See other manuals at the bottom of the first or last page.
Size
318.89 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / Additional steps when attaching or removing paper exit options.
File
mx-m266n-mx-m316n-mx-m356n-sm141.pdf
Date

View Sharp MX-M266N / MX-M316N / MX-M356N (serv.man141) Technical Bulletin online

 
 
Sharp Business Systems UK Plc., Document Systems Support
 
 
1/3 
Date:  
31
st
 July 2015 
Model:  
MX-M266N/316N 
Ref.:  
DCE938 
Colour:  
 
White 
Page:  
1 of 3 
TECHNICAL BULLETIN 
ADDITIONAL STEPS TO ATTACH OR REMOVE 
PAPER EXIT OPTIONS 
 
1. Model Name: MX-M266N/M316N 
 
2. Description: 
When attaching or removing Job separator (MX-TR18), Exit tray unit (MX-TR17), and   
 
 
Inner finisher (MX-FN26), the positioning boss on Delivery Tray Right (GCAB-0241QSZZ)   
 
 
attached to the main unit may interfere. 
 
 
Usually, Delivery Tray Right (GCAB-0241QSZZ) doesn't need to be removed when   
 
 
attaching or removing the Second delivery unit however, it must be removed in case the   
 
 
interference described above occurs. Please see below for instructions. 
 
 
 
- The location of interference which may occur during the attachment / removal of Second   
   
delivery 
unit 
 
 
 
 
 
 
 
  Target 
options 
   
 
MX-TR17: 
Exit 
tray 
unit 
   
 
MX-FN26: 
Inner 
finisher 
   
 
MX-TR18: 
Job 
separator 
 
3. Production 
From the beginning of main unit production to June, 2015 production. (Since height of the 
              Month: 
boss for Delivery Tray Right (GCAB-0241QSZZ) has been controlled for those 
 
 
manufactured in July, 2015 and later, it won't be necessary to perform additional steps   
  described 
below.) 
 
  Positioning boss on Delivery 
 Tray Right 
  Second delivery unit 
 
Sharp Business Systems UK Plc., Document Systems Support
 
 
2/3 
 
Additional Steps to Attach Paper Exit Options 
(Removing Delivery Tray Right (GCAB-0241QSZZ)) 
 
 
How to remove Delivery Tray Right 
 
    1. Remove two screws and Right sub cabinet. 
 
 
 
 
 
 
 
 
 
 
 
 
    2. Remove one screw in the center and remove Right cover lower. Then remove screws on both   
 
        ends and remove Right cabinet unit. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Sharp Business Systems UK Plc., Document Systems Support
 
 
3/3 
 
 
    3. Remove the screw shown in the photo. 
 
 
 
 
 
 
 
 
 
 
 
 
    4. Remove the Delivery Tray Right holding up the pawls at three points as shown in the photo.   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
    *For operations from this point on, please refer to the Installation Manual. 
 
 
Page of 3
Display

Download Sharp MX-M266N / MX-M316N / MX-M356N (serv.man141) Technical Bulletin

Here you can view online or download Sharp MX-M266N / MX-M316N / MX-M356N (serv.man141) Technical Bulletin in pdf. This Technical Bulletin can help you recover, restore, fix, disassemble and repair Sharp MX-M266N / MX-M316N / MX-M356N (serv.man141) Copying Equipment. Information contained in Sharp MX-M266N / MX-M316N / MX-M356N (serv.man141) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).