DOWNLOAD Sharp MX-M264N / MX-M264NR / MX-M264NV / MX-M264U / MX-M314N / MX-M314NR / MX-M314NV / MX-M314U / MX-M354N / MX-M354NR / MX-M354U (serv.man11) Service Manual ↓ Size: 16.85 MB | Pages: 127 in PDF or view online for FREE

Model
MX-M264N MX-M264NR MX-M264NV MX-M264U MX-M314N MX-M314NR MX-M314NV MX-M314U MX-M354N MX-M354NR MX-M354U (serv.man11)
Pages
127
Size
16.85 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Copying Equipment / Operation Guide.
File
mx-m264n-mx-m264nr-mx-m264nv-mx-m264u-mx-m314n-mx-.pdf
Date

Sharp MX-M264N / MX-M264NR / MX-M264NV / MX-M264U / MX-M314N / MX-M314NR / MX-M314NV / MX-M314U / MX-M354N / MX-M354NR / MX-M354U (serv.man11) User Manual / Operation Manual ▷ View online

2-29
COPIER
Contents
2
Store the original size.
(1) Touch the [Store/Delete] tab.
(2) Touch a key for storing a custom original 
size.
Touch a key that does not show a size (
).
If you wish to edit or clear a previously stored key...
Touch the key that you want to edit or clear. The following screen will appear.
• To edit the key, touch the [Amend] key and go to the next step.
• To clear the key, touch the [Delete] key. Make sure that the original size has been cleared and touch the [OK] key.
3
Enter the original size.
(1) Enter the X (horizontal) dimension of the 
original.
Touch the X (width) numeric value display key to open a 
number entry screen. Enter the width of the original with 
the numeric keys, and touch the [OK] key in the number 
entry screen. A dimension from 25 mm to 432 mm (1" to 
17") can be entered.
(2) Enter the Y (vertical) dimension of the 
original.
Touch the Y (height) numeric value display key to open a 
number entry screen. Enter the height of the original with 
the numeric keys, and touch the [OK] key in the number 
entry screen. A dimension from 25 mm to 297 mm (1" to 
11-5/8") can be entered.
(3) Touch the [OK] key.
You can also touch the 
 keys to change the number.
To cancel the operation...
Press the [CLEAR ALL] key (
).
Original
OK
OK
X254 Y210
Recall
Store/Delete
Custom Size
(1)
(2)
Amend
Delete
Cancel
OK
OK
Size Input
Cancel
Original
(25~432)
mm
(25~297)
mm
420
X
Y
297
(3)
(1)
(2)
2-30
COPIER
Contents
Retrieving a stored original size
To retrieve a stored original size, touch the [Original] key in the base screen of copy mode and perform the steps below.
1
Touch the [Custom Size] key.
2
Retrieve the desired stored original size.
(1) Touch the [Recall] tab.
(2) Touch the key of the original size that you 
wish to retrieve.
(3) Touch the [OK] key.
To cancel the operation...
Press the [CLEAR ALL] key (
).
A5
A5R
B5
216x340
A4R
216x343
A4
A3
B5R
B4
Custom Size
Original
OK
Size Input
Inch
AB
A4
Auto
Manual
X254 Y210
Custom Size
Original
OK
OK
Recall
Store/Delete
(3)
(2) (1)
2-31
COPIER
Contents
OUTPUT
To select output functions and the output tray, touch the [Output] key in the base screen of copy mode. Output functions 
that can be selected are sort, group, offset and staple sort. All explanations of the settings below assume that a finisher 
is installed.
(1)
[Offset Tray] key ([Centre Tray] key)
Output is delivered to the offset tray. The [Offset Tray] 
key is automatically selected when the [Staple Sort] key 
is selected.
(2)
[Offset] key
This is used to offset each set of output from the previous 
set.
The offset function operates when the checkbox is 
selected 
 and does not operate when the checkbox is 
not selected 
. (The offset checkmark is automatically 
cleared when the staple sort function is selected.)
Offset function
 (page 2-32)
(3)
[Sort] key
This is used to sort (collate) output into sets.
Sort mode
 (pag2-32)
(4)
[Staple Sort] key
This is used to sort output into sets, staple each set, and 
deliver the sets to the tray. (Note that the sets will not be 
offset in the output tray.)
Staple sort function
 (page 2-33)
(5)
[Group] key
This is used to group copies by page.
Group mode
 (page 2-32)
(6)
Output display
An icon will appear to indicate the output mode.
(7)
[Right Tray] key
Select this key to have output delivered to the right tray. 
When the right tray is selected, offset and staple sort 
cannot be selected.
(8)
[OK] key
Touch this key to close the output screen and return to 
the base screen.
OK
Output
Sort
Right Tray
Offset
Offset
Tray
Staple
Sort
Group
(6)
(7)
(8)
(3)
(4)
(5)
(1)
(2)
The above screen shows the keys that appear when a finisher is installed. The keys that appear will vary depending on what 
peripheral devices are installed.
In addition, it may not be possible to select some keys depending what peripheral devices are installed. If your screen is 
different from the screen of previous page, see the screens that follow.
Example
The screen when a finisher is not installed.
Upper Tray
Sort
Group
Offset
Output
OK
Offset Tray
2-32
COPIER
Contents
OUTPUT MODES
This section explains the output modes.
Sort mode
This is used to sort (collate) output into sets.
Example: Sorting the output into 5 sets
Group mode
This function groups copies by page.
Example: Groups of 5 copies of each page
Offset function
This function offsets each set of copies from the previous set in the output tray, making it easy to separate sets of copies.
• The sort function is automatically selected when 
originals are placed in the automatic document feeder.
• When the Quick File Folder for document filing is 
full, copying of a large number of originals using the 
sort function will be impeded. Delete unneeded files 
from the Quick File Folder.
Sort
Output
Originals
Output
Set the number of copies (5).
Touch the [Output] key.
Touch the [Sort] key.
Press the [START] key.
The group function is automatically selected when an 
original is placed on the document glass.
Group
Output
Originals
Output
Set the number of copies (5).
Touch the [Output] key.
Touch the [Group] key.
Press the [START] key.
• The offset function cannot be used in the right tray.
• The offset function cannot be selected when the staple sort function is selected.
Offset function "ON"
Offset function "OFF"
Page of 127
Display

Sharp MX-M264N / MX-M264NR / MX-M264NV / MX-M264U / MX-M314N / MX-M314NR / MX-M314NV / MX-M314U / MX-M354N / MX-M354NR / MX-M354U (serv.man11) User Manual / Operation Manual ▷ Download