DOWNLOAD Sharp MX-M264N / MX-M264NR / MX-M264NV / MX-M264U / MX-M314N / MX-M314NR / MX-M314NV / MX-M314U / MX-M354N / MX-M354NR / MX-M354U (serv.man109) Service Manual ↓ Size: 134.51 KB | Pages: 9 in PDF or view online for FREE

Model
MX-M264N MX-M264NR MX-M264NV MX-M264U MX-M314N MX-M314NR MX-M314NV MX-M314U MX-M354N MX-M354NR MX-M354U (serv.man109)
Pages
9
Size
134.51 KB
Type
PDF
Document
Regulatory Data
Brand
Device
Copying Equipment / MSDS for MX-312GT.
File
mx-m264n-mx-m264nr-mx-m264nv-mx-m264u-mx-m314n-mx-.pdf
Date

Sharp MX-M264N / MX-M264NR / MX-M264NV / MX-M264U / MX-M314N / MX-M314NR / MX-M314NV / MX-M314U / MX-M354N / MX-M354NR / MX-M354U (serv.man109) Regulatory Data ▷ View online

   
    SAFETY    DATA    SHEET
 
 
Revision Date 
: 30.June 2015 
                                                                                                                     
Date of first issue : 30.March 2010 
 
SDS  Number 
:  F-01791 
  3 / 9 
SECTION 5: Firefighting measures 
5.1 Extinguishing media 
Suitable extinguishing media   
              :    Water spray 
Alcohol-resistant foam 
Dry chemical 
Carbon dioxide (CO2) 
Unsuitable extinguishing media 
              :    High volume water jet 
 
5.2 Special hazards arising from the substance or mixture 
Specific hazards during firefighting                :    Do not use a solid water stream as it may scatter and spread fire. 
Exposure to combustion products may be a hazard to health. 
Hazardous combustion products 
              :    Carbon oxides 
Nitrogen oxides (NOx) 
 
5.3 Advice for firefighters 
Special protective equipment for firefighters:    In the event of fire, wear self-contained breathing apparatus. 
Use personal protective equipment. 
Specific extinguishing methods                      :    Use extinguishing measures that are appropriate to local     
circumstances and the surrounding environment. 
Use water spray to cool unopened containers. 
Remove undamaged containers from fire area if it is safe to 
do so.  Evacuate area. 
 
SECTION 6: Accidental release measures 
6.1 Personal precautions, protective equipment and emergency procedures 
Personal precautions   
 
              :    Use personal protective equipment. 
Follow safe handling advice and personal protective 
equipment recommendations. 
 
6.2 Environmental precautions 
Environmental precautions   
              :    Discharge into the environment must be avoided. 
Prevent further leakage or spillage if safe to do so. 
Retain and dispose of contaminated wash water. 
Local authorities should be advised if significant spillages 
cannot be contained. 
 
   
    SAFETY    DATA    SHEET
 
 
Revision Date 
: 30.June 2015 
                                                                                                                     
Date of first issue : 30.March 2010 
 
SDS  Number 
:  F-01791 
  4 / 9 
6.3 Methods and material for containment and cleaning up 
Methods for cleaning up                                  :    Sweep up or vacuum up spillage and collect in suitable 
container for disposal. 
Avoid dispersal of dust in the air (i.e., clearing dust surfaces 
with compressed air). 
Dust deposits should not be allowed to accumulate on 
surfaces, as these may form an explosive mixture if they are 
released into the atmosphere in sufficient concentration. 
Local or national regulations may apply to releases and 
disposal of this material, as well as those materials and items 
employed in the cleanup of releases.   
You will need to determine which regulations are applicable. 
Sections 13 and 15 of this SDS provide information regarding 
certain local or national requirements. 
6.4 Reference to other sections 
See sections: 7, 8, 11, 12 and 13. 
 
SECTION 7: Handling and storage 
7.1 Precautions for safe handling 
Technical measures   
 
              :    Static electricity may accumulate and ignite suspended dust 
causing an explosion. 
Provide adequate precautions, such as electrical grounding 
and bonding, or inert atmospheres. 
Advice on safe handling     
              :    Do not breathe dust. Do not swallow. Avoid contact with eyes. 
Handle in accordance with good industrial hygiene and safety 
practice. Keep container tightly closed. 
Minimize dust generation and accumulation. 
Keep away from heat and sources of ignition. 
Take care to prevent spills, waste and minimize release to the 
environment. 
Hygiene measures                                            :    When using do not eat, drink or smoke.   
Wash contaminated clothing before re-use. 
7.2 Conditions for safe storage, including any incompatibilities 
Requirements for storage   
              :    Keep tightly closed. Keep in a cool, well-ventilated place. 
areas and containers   
 
 
  Store in accordance with the particular national regulations. 
 
   
    SAFETY    DATA    SHEET
 
 
Revision Date 
: 30.June 2015 
                                                                                                                     
Date of first issue : 30.March 2010 
 
SDS  Number 
:  F-01791 
  5 / 9 
Advice on common storage   
              :    Do not store with the following product types: 
Strong oxidizing agents 
Organic peroxides 
Explosives 
Gases 
7.3 Specific end use(s) 
Specific use(s)    
 
              :    No data available 
 
SECTION 8: Exposure controls/personal protection 
8.1 Control parameters 
Occupational Exposure Limits 
Components 
CAS-No. 
Value type 
  (Form of exposure) 
Control parameters 
Basis 
Carbon black 
1333-86-4 
TWA 
3.5 mg/m3 
GB EH40 
STEL 
7 mg/m3 
GB EH40 
Silicon dioxide 
7631-86-9 
TWA (inhalable  dust) 
  6 mg/m3 (Silica) 
GB EH40 
TWA (Respirable  dust) 
2.4 mg/m3 (Silica) 
GB EH40 
8.2 Exposure controls 
Engineering measures 
Minimize workplace exposure concentrations. 
Apply measures to prevent dust explosions. 
Personal protective equipment 
Eye protection   
:    Not required under intended use 
Hand protection   
:    Not required under intended use 
Skin and body protection   
:    Not required under intended use 
Respiratory protection   
:    Not required under intended use 
SECTION 9: Physical and chemical properties 
9.1 Information on basic physical and chemical properties 
Appearance   
:    Powder 
Colour   
:    Black 
Odour   
:    Odourless 
Odour Threshold   
:    No data available 
pH   
:    No data available 
Melting point/freezing point   
:    100 - 130 °C 
Initial boiling point and boiling range 
:    No data available 
Flash point   
:    Not applicable 
Evaporation rate   
:    Not applicable 
Flammability (solid, gas)   
:    Not classified as a flammability hazard 
   
    SAFETY    DATA    SHEET
 
 
Revision Date 
: 30.June 2015 
                                                                                                                     
Date of first issue : 30.March 2010 
 
SDS  Number 
:  F-01791 
  6 / 9 
Upper explosion limit   
:    No data available 
Lower explosion limit   
:    No data available 
Vapour pressure   
:    Not applicable 
Relative vapour density   
:    Not applicable 
Density   
:    ca. 1,1 g/cm3 
Bulk density   
:    ca. 0,35 g/cm3 
Solubility(ies)   
Water solubility   
:    Negligible 
Partition coefficient: noctanol/water 
:    Not applicable 
Auto-ignition temperature   
:    No data available 
Decomposition temperature   
:    No data available 
Viscosity   
:    Not applicable 
Explosive properties   
:    Not explosive 
Oxidizing properties   
:    The substance or mixture is not classified as oxidizing. 
9.2 Other information 
No data available 
SECTION 10: Stability and reactivity 
10.1 Reactivity 
Not classified as a reactivity hazard. 
10.2 Chemical stability 
Stable under normal conditions. 
10.3 Possibility of hazardous reactions 
Hazardous reactions   
 
            :    Dust can form an explosive mixture in air. 
Can react with strong oxidizing agents. 
10.4 Conditions to avoid 
Conditions to avoid   
 
            :    None known. 
10.5 Incompatible materials 
Materials to avoid   
 
            :    Oxidizing agents 
10.6 Hazardous decomposition products 
No hazardous decomposition products are known. 
SECTION 11: Toxicological information 
11.1 Information on toxicological effects 
Information on likely routes of exposure    :    Inhalation 
Skin contact 
Ingestion 
Eye contact 
Page of 9
Display

Sharp MX-M264N / MX-M264NR / MX-M264NV / MX-M264U / MX-M314N / MX-M314NR / MX-M314NV / MX-M314U / MX-M354N / MX-M354NR / MX-M354U (serv.man109) Regulatory Data ▷ Download

  • DOWNLOAD Sharp MX-M264N / MX-M264NR / MX-M264NV / MX-M264U / MX-M314N / MX-M314NR / MX-M314NV / MX-M314U / MX-M354N / MX-M354NR / MX-M354U (serv.man109) Service Manual ↓ Size: 134.51 KB | Pages: 9 in PDF or view online for FREE
  • Here you can View online or download the Regulatory Data for the Sharp MX-M264N / MX-M264NR / MX-M264NV / MX-M264U / MX-M314N / MX-M314NR / MX-M314NV / MX-M314U / MX-M354N / MX-M354NR / MX-M354U (serv.man109) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp MX-M264N / MX-M264NR / MX-M264NV / MX-M264U / MX-M314N / MX-M314NR / MX-M314NV / MX-M314U / MX-M354N / MX-M354NR / MX-M354U (serv.man109) Copying Equipment. Information contained in Sharp MX-M264N / MX-M264NR / MX-M264NV / MX-M264U / MX-M314N / MX-M314NR / MX-M314NV / MX-M314U / MX-M354N / MX-M354NR / MX-M354U (serv.man109) Regulatory Data (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.