Sharp MX-M182 / MX-M182D (serv.man36) Service Manual / Technical Bulletin ▷ View online
Sharp Electronics (UK) Ltd., Document Systems Support
1/4
TECHNICAL BULLETIN
Date:
17
th
Feb 2012
Model:
See below
Ref.:
DCE851
Colour:
White
Page:
1 of 4
SERVICE PARTS SETTINGS AND
MOUNTING PROCEDURE
1. Model Name: MX-M182/M182D/M202D/M232D
AR-5618/5618D/5618N/5620/5620D/5620N/5623/5623D/5623N
AR-X180/X200/X200D/X230N
2. General:
The service parts used for connecting the coin vendor or auditor to the models above
have been set. So when connecting the coin vendor or auditor to one of these models,
procure the following service parts:
1) A set of service parts for connecting the coin vendor or auditor:
Parts Name
Parts Code
Qty
Price Rank
CV_AUD I/F PWB UNIT
CPWBN0275QS31
1
BT
CV_AUD Harness
DHAI-0704QSPZ
1
AR
Screw (M3x6)
XHBS730P06000
2
AC
Band LBNDJ0037FCZ1
1
AA
CV_AUD I/F PWB UNIT (CPWBN0275QS31) CV_AUD Harness (DHAI-0704QSPZ)
2)
Mounting
Procedure:
Refer to the Service Parts Mounting Procedure as attached.
2/4
Sharp Electronics (UK) Ltd., Document Systems Support
CV_AUD I/F Service Parts Mounting Procedure
Model Name: MX-M182/M182D/M202D/M232D
AR-5618/5618D/5618N/5620/5620D/5620N/5623/5623D/5623N
AR-X180/X200/X200D/X230N
(1) Remove the rear cabinet from the main unit.
(2) Fix the CV_AUD I/F PWB at the location shown on the photo below with screws.
Location for CV_AUD I/F
PWB UNIT to be fixed
PWB UNIT to be fixed
3/4
Sharp Electronics (UK) Ltd., Document Systems Support
* If only one of Coin Vendor and Auditor is used, it is all right with the unused side disconnected.
(3) Connect the harness.
(4) Close the rear cabinet, the end of mounting procedure.
(5) Validate the Coin Vendor with use of the function settings.
Tighten it at these 2 locations with screws.
For connection to
Auditor *
Auditor *
For connection to
MCU PWB
MCU PWB
For connection to
Coin Vendor *
Coin Vendor *
Tie with the mirror-motor harness.
Connect DHAI-0704QSPZ to
CN133
CN133
Connect to Coin Vendor/Auditor
(outside the machine)
(outside the machine)
MCU PWB
4/4
Sharp Electronics (UK) Ltd., Document Systems Support
Display