Sharp MX-LC17 Service Manual ▷ View online
MX-LC17 N MAINTENANCE 3 – 6
NOTE:Be careful as follows when cover installation.
Insert the lever to the hole of plate to be locked.
Be sure that the arm 1 is behind the arm 2.
3)
Remove the holder.
4)
Remove the paper pickup roller and the paper feed roller.
5)
Remove the separation roller.
b. Torque limiter
1)
Remove the paper feed unit.
2)
Remove the spring, screw and the plate.
3)
Remove the E-ring, and lift the shaft.
4)
Remove the torque limiter.
Ĭ
ĭ
CTO
CTO
Ĭ
ĭ
Ĭ
ĭ
Ĭ
ĭ
ĭ
ĭ
ĭ
ĭ
Į
ĭ
Ĭ
ĭ
MX-LC17 N MAINTENANCE 3 – 7
c. Transport roller
1)
Remove the paper feed unit.
2)
Remove the spring, screw and the plate.
3)
Remove the harness.
4)
Remove the screw, and remove the plate and gear.
5)
Remove the E-ring and gear.
6)
Remove the pin and each of parts.
7)
Remove the screw and cover.
8)
Remove each of the parts.
9)
Remove each of the parts.
Ĭ
ĭ
ĭ
ĭ
ĭ
ĭ
Į
ĭ
Ĭ
ĭ
Į
Į
ĭ
Ĭ
ĭ
ĭ
Ĭ
Į Ĭ
į
Ĭ
Ĭ
ĭ
ĭ
Ĭ
Į
İ
ı
ij
Ĵ
į
IJ
Ĭ
ĭ
Į
į
MX-LC17 N MAINTENANCE 3 – 8
10) Remove the transport roller.
B. Drive section
(1)
Drive unit
a. Paper feed clutch
1)
Remove the drive unit.
2)
Disconnect the connector and release the harness from clamp.
3)
Remove the screw and cover.
4)
Remove the E-ring and the gear.
5)
Release the harness from clamp and remove the paper feed
clutch.
clutch.
6)
Remove each of the parts and replace the paper feed clutch.
b. Transport clutch
1)
Remove the drive unit.
2)
Release the clamp and disconnect the connector.
No.
Name
1
Paper feed clutch
2
Transport clutch
1
2
Ĭ
ĭ
Ĭ
ĭ
Ĭ
ĭ
Ĭ
Į
ĭ
ĭ
Ĭ
MX-LC17 N MAINTENANCE 3 – 9
3)
Remove the screw and the cover.
4)
Remove the E-ring and gear.
5)
Remove the transport clutch.
6)
Remove each of the parts and replace the transport clutch.
Ĭ
ĭ
Ĭ
ĭ
Ĭ
Ĭ
Į
ĭ
Click on the first or last page to see other MX-LC17 service manuals if exist.