Sharp MX-LC15 Service Manual ▷ View online
MX-LC15 MAINTENANCE 3 – 3
2. Each unit disassembly
A. Paper feed section
(1)
Paper feed tray
1)
Pull out the paper feed tray.
Loosen the stopper fixing screw on the lower right side of the
paper feed tray, move the stopper so it wont catch on the
frame and keep the tray from moving out.
Loosen the stopper fixing screw on the lower right side of the
paper feed tray, move the stopper so it wont catch on the
frame and keep the tray from moving out.
2)
Remove the screw from the left and right rail.
3)
Remove the paper feed tray from the rail.
(2)
Paper feed unit
1)
Pull out the paper feed tray.
2)
Open the upper cover.
3)
Remove the upper cabinet.
4)
Disconnect the connector, and remove the paper feed unit.
No.
Name
1
Paper feed tray
2
Paper feed unit
1
2
1
2
Ĭ
ĭ
Ĭ
ĭ
Į
Ĭ
ĭ
Ĭ
Ĭ
ĭ
MX-LC15 MAINTENANCE 3 – 4
B. Drive section
(1)
Drive unit
1)
Remove the rear cabinet.
2)
Disconnect the connector, and remove the drive unit.
3. Disassembly and assembly in each
unit
A. Paper feed section
(1)
Paper feed unit
a. Paper pickup roller, paper feed roller, separation roller
1)
Open the upper cover.
2)
Remove the paper pickup roller and the paper feed roller.
No.
Name
1
Drive unit
1
1
1
1
1
2
Ĭ
ĭ
Ĭ
Ĭ
Ĭ
No.
Name
1
Paper pickup roller
2
Paper feed roller
3
Separation roller
4
Torque limiter
5
Transport roller
1
4
3
2
5
Ĭ
ĭ
Ĭ
ĭ
Į
MX-LC15 MAINTENANCE 3 – 5
3)
Remove the paper guide block. Remove the separation roller.
b. Torque limiter
1)
Remove the paper feed unit.
2)
Remove the cover.
3)
Remove the E-ring, and remove the each parts. Remove the
screw.
screw.
4)
Lift the shaft, and remove the torque limiter.
c. Transport roller
1)
Remove the paper feed unit.
2)
Remove the paper guide block.
3)
Remove the spring, and remove the screw.
4)
Remove the cover, and remove the lever.
5)
Remove the E-ring, screw and remove each of the parts.
Ĭ
ĭ
Į
į
Ĭ
ĭ
Į
İ
ı
į
Ĭ
ĭ
Į
į
Ĭ
Ĭ
ĭ
ĭ
ĭ
Ĭ
ĭ
Ĭ
Į
Į
į
İ
ı
ı
ĭ
ĭ
MX-LC15 MAINTENANCE 3 – 6
6)
Remove the screw.
7)
Remove the frame.
8)
Remove the E-ring, and remove the clutch.
9)
Remove the E-ring, and remove the each parts. Remove the
transport roller.
transport roller.
Ĭ
Ĭ
ĭ
ĭ
Ĭ
ĭ
Į
į
Į
į
İ
Click on the first or last page to see other MX-LC15 service manuals if exist.